Structural Integrity Management Of Fixed Offshore Structures

API RP 2SIM, 1st Edition, November 2014 - Structural Integrity Management of Fixed Offshore Structures. This recommended practice provides guidance for the structural integrity management (SIM) of existing fixed offshore structures used for the drilling, development, production, and storage of hydrocarbons in offshore areas. However, the general principles of SIM apply to any structure. Specific guidance is provided for the evaluation of structural damage, above- and below-water structural inspection, fitness-for-purpose assessment, risk reduction, mitigation planning, and the process of decommissioning. This recommended practice incorporates and expands on the recommendations of Section 14, "Surveys" and Section 17, "Assessment of Existing Platforms" as previously provided in API 2A-WSD, 21st Edition. See Annex A for additional information and guidelines on the provisions stated in the numbered sections of this document. The SIM process provided in this recommended practice is applicable to existing platforms installed at any location worldwide. However, the recommended practice provides specific metocean criteria, which are only applicable for use in fitness-for-purpose assessments of platforms located in the U.S. Gulf of Mexico and the U.S. West Coast. For guidelines, recommended practices, and other requirements relating to planning, designing, and constructing new fixed offshore platforms, including reuse and change-in-use of existing platforms, reference should be made to the latest edition of API 2A-WSD. For guidelines, recommended practices, and other requirements relating to planning, designing, and constructing new offshore floating production systems, including reuse and change-in-use of existing floating production systems, reference should be made to the latest edition of API 2FPS.

A comprehensive overview of managing and assessing safety and functionality of ageing offshore structures and pipelines A significant proportion, estimated at over 50%, of the worldwide infrastructure of offshore structures and pipelines is in a life extension phase and is vulnerable to ageing processes. This book captures the central elements of the management of ageing offshore structures and pipelines in the life extension phase. The book gives an overview of: the relevant ageing processes and hazards; how ageing processes are managed through the life cycle, including an overview of structural integrity management; how an engineer should go about assessing a structure that is to be operated beyond its original design life, and how ageing can be mitigated for safe and effective continued operation. Key Features: Provides an understanding of ageing processes and how these can be mitigated. Applies engineering methods to ensure that existing structures can be operated longer rather than decommissioned unduly prematurely. Helps engineers performing these tasks in both evaluating the existing structures and maintaining ageing structures in a safe manner. The book gives an updated summary of current practice and research on the topic of the management of ageing structures and pipelines in the life extension phase but also meets the needs of structural engineering students and practicing offshore and structural engineers in oil & gas and engineering companies. In addition, it should be of value to regulators of the offshore industry.

Papers presented at the Fourth International Symposium on Integrity of Offshore Structures, 2-3 July 1990, Kelvin Conference Centre, University of Glasgow, Scotland organized by the Department of Naval Architecture and Ocean Engineering and Mechanical Engineering.

UNDERWATER INSPECTION AND REPAIR FOR OFFSHORE STRUCTURES Benefit from a much-needed, up-to-date handbook on underwater inspection and repair processes and technologies Underwater Inspection and Repair for Offshore Structures fills a gap in the literature to provide an overview of the inspection and repair processes for both steel and concrete offshore structures. Authors and noted experts on the topic John V. Sharp and Gerhard Esdal guide readers through the reasons why inspection and repair are performed and how both are linked to the management of structural integrity, statutory requirements, and various types of damage. The book addresses critical topics, including the execution and planning of inspection and repair, the tools and methods used, and their deployment underwater. The authors put particular focus on steel and concrete offshore oil and gas installations, but the content is also applicable to the substructures of offshore wind turbines. Underwater Inspection and Repair for Offshore Structures is complementary to the authors’ book Ageing and Life Extension of Offshore Structures, also from Wiley. This important book: Covers current inspection and monitoring techniques to evaluate existing structures Includes coverage of robotic (ROV) inspection and repair methods Provides an overview of repair and maintenance techniques applicable to the splash‑zone and underwater operations Written for engineers, designers, and safety auditors working with offshore structures. Underwater Inspection and Repair for Offshore Structures is a comprehensive resource for understanding how to effectively inspect and repair these vulnerable structures.

Oil and gas assets are under constant pressure and engineers and managers need integrity management training and strategies to ensure their operations are safe. Gaining practical guidance is not trained ahead of time and learned on the job. Asset Integrity Management of Offshore and Onshore Structures delivers a critical training tool for engineers to prepare and mitigate safety risk. Starting with a transitional introductory chapter, the reference dives into integrity management approaches including codes and standards. Inspection, assessment, and repair methods are covered for offshore, FPSO, onshore and pipelines. Suggested proactive approaches and modeling risk-based inspection are also included. Supported with case studies, detailed discussions, and practical applications, Asset Integrity Management of Offshore and Onshore Structures gives oil and gas managers a reference to extend asset life, reduce costs, and minimalize impact to personnel and environment. Bridge between the theory of integrity management into oil and gas application Understand the strategies and techniques to mitigate corrosion affect, assessment, inspection, and repairs from real-world examples Manage a variety of assets including offshore, subsea, pipelines, and onshore

Offshore Structures: Design, Construction and Maintenance, Second Edition covers all types of offshore structures and platforms employed worldwide. As the ultimate reference for selecting, operating and maintaining offshore structures, this book provides a roadmap for designing structures which will stand up even in the harshest environments. Subsea pipeline design and installation is also covered in this edition, as is the selection of the proper type of offshore structure, the design procedure for the fixed offshore structure, nonlinear analysis (Push over) as a new technique to design and assess the existing structure, and more. With this book in hand, engineers will have the most up-to-date methods for performing a structural lifecycle analysis, implementing maintenance plans for topsides and jackets and using non-destructive testing. Provides a one-stop guide to offshore structure design and analysis Presents easy-to-understand methods for structural lifecycle analysis Contains expert advice for designing offshore platforms for all types of environments

UNDERWATER INSPECTION AND REPAIR FOR OFFSHORE STRUCTURES Benefit from a much-needed, up-to-date handbook on underwater inspection and repair processes and technologies Underwater Inspection and Repair for Offshore Structures fills a gap in the literature to provide an overview of the inspection and repair processes for both steel and concrete offshore structures. Authors and noted experts on the topic John V. Sharp and Gerhard Esdal guide readers through the reasons why inspection and repair are performed and how both are linked to the management of structural integrity, statutory requirements, and various types of damage. The book addresses critical topics, including the execution and planning of inspection and repair, the tools and methods used, and their deployment underwater. The authors put particular focus on steel and concrete offshore oil and gas installations, but the content is also applicable to the substructures of offshore wind turbines. Underwater Inspection and Repair for Offshore Structures is complementary to the authors’ book Ageing and Life Extension of Offshore Structures, also from Wiley. This important book: Covers current inspection and monitoring techniques to evaluate existing structures Includes coverage of robotic (ROV) inspection and repair methods Provides an overview of repair and maintenance techniques applicable to the splash‐zone and underwater operations Written for engineers, designers, and safety auditors working with offshore structures. Underwater Inspection and Repair for Offshore Structures is a comprehensive resource for understanding how to effectively inspect and repair these vulnerable structures.

This book examines the fire-resistant design of fixed offshore platforms. It describes the required loading, load combinations, strength and stability checks for structural elements. It also explains the design of tubular joints, fatigue analysis, dynamic analysis, and impact analysis, Fire resistance, fire, explosion and blast effect analysis, fire protection materials, and safety.