Symmetry Properties In Transmission Lines Loaded With Electrically Small Resonators

This book discusses the analysis, circuit modeling, and applications of transmission lines loaded with electrically small resonators (mostly resonators inspired by metamaterials), focusing on the study of the symmetry-related electromagnetic properties of these loaded lines. It shows that the stopband functionality (resonance) that these lines exhibit can be controlled by the relative orientation between the line and the resonator, which determines their mutual coupling. Such resonance controllability, closely related to symmetry, is essential for the design of several microwave components, such as common-mode suppressed differential lines, novel microwave sensors based on symmetry disruption, and spectral signature radio-frequency barcodes. Other interesting aspects, such as stopband bandwidth enhancement (due to inter-resonator coupling, and related to complex modes) and magnetoelectric coupling between the transmission lines and split-ring resonators, are also included in the book.

Metamaterials represent a new emerging innovative field of research which has shown rapid acceleration over the last couple of years. In this handbook, we present the richness of the field of metamaterials in its widest sense, describing artificial media with sub-wavelength structure for control over wave propagation in four volumes. Volume 1 focuses on the fundamentals of electromagnetic metamaterials in all their richness, including metasurfaces and hyperbolic metamaterials. Volume 2 widens the picture to include elastic, acoustic, and seismic systems, whereas Volume 3 presents nonlinear and active photonic metamaterials. Finally, Volume 4 includes recent progress in the field of nanoplasmonics, used extensively for the tailoring of the unit cell response of photonic metamaterials. In its totality, we hope that this handbook will be useful for a wide spectrum of readers, from students to active researchers in industry, as well as teachers of advanced courses on wave propagation. Contents: Volume 1: Electromagnetic Metamaterials (Ekaterina Shamonina): PrefaceElectromagnetic Metamaterials: Homogenization and Effective Properties of Mixtures (Ari Sihvola)Effective Medium Theory of Electromagnetic and Quantum Metamaterials (Mário G Silveirinha)Hyperbolic Metamaterials (Igor I Smolyaninov)Circuit and Analytical Modelling of Extraordinary Transmission Metamaterials (Francisco Medina, Francisco Mesa, Raul Rodríguez-Berral and Carlos Molero)Electromagnetic Metasurfaces: Synthesis, Realizations and Discussions (Karim Achouri and Christophe Caloz)Metasurfaces for General Control of Reflection and Transmission (Sergei Tretyakov, Viktar Asadchy and Ana Díaz-Rubio)Scattering at the Extreme with Metamaterials and Plasmonics (Francesco Monticone and Andrea Alù)All-Dielectric Nanophotonics: Fundamentals, Fabrication, and Applications (Alexander Krasnok, Roman Savelev, Denis Baranov and Pavel Belov)Tunable Metamaterials (Ilya V Shadrivov and Dragomir N Neshev)Spatial Solitonic and Nonlinear Plasmonic Aspects of Metamaterials (Allan D Boardman, Alesandro Alberucci, Gaetano Assanto, Yu G Rapoport, Vladimir V Grimalsky, Vasyl M Ivchenko and Eugen N Tkachenko)Metamaterial Catheter Receivers for Internal Magnetic Resonance Imaging (Richard R A Syms, Ian R Young and Laszlo Solymar)Microwave Sensors Based on Symmetry Properties and Metamaterial Concepts (Jordi Naqui, Ali K Horestani, Christophe Fumeaux and Ferran Martín)Volume 2: Elastic, Acoustic, and Seismic Metamaterials (Richard Craster and Sébastien Guenneau): PrefaceDynamic Homogenization of Acoustic and Elastic Metamaterials and Phononic Crystals (Richard Craster, Tryfon Antonakakis and Sébastien Guenneau)Acoustic Metamaterial (Nicholas Fang, Jun Xu, Navid Nemati, Nicolas Viard and Denis Lafarge)Flat Lens Focusing of Flexural Waves in Thin Plates (Patrick Sebbah and Marc Dubois)Space–Time Cloaking (Martin W McCall and Paul Kinsler)Soda Cans Metamaterial: Homogenization and Beyond (Fabrice Lemoult, Geoffroy Lerosey, Nadège Kaïna and Mathias Fink)New Trends Toward Locally-Resonant Metamaterials at the Mesoscopic Scale (Philippe Roux, Matthieu Rupin, Fabrice Lemoult, Geoffroy Lerosey, Andrea Colombi, Richard Craster, Sébastien Guenneau, William A Kuperman and Earl G Williams)Seismic Metamaterials: Controlling Surface Rayleigh Waves Using Analogies with Electromagnetic Metamaterials (Stéphane Brûlé, Stefan Enoch, Sébastien Guenneau and

This book presents and discusses strategies for the design and implementation of common-mode suppressed balanced microwave filters, including, narrowband, wideband, and ultra-wideband filters This book examines differential-mode, or balanced, microwave filters by discussing several implementations of practical realizations of these passive components. Topics covered include selective mode suppression, designs based on distributed and semi-lumped approaches, multilayer technologies, defect ground structures, coupled resonators, metamaterials, interference techniques, and substrate integrated waveguides, among others. Divided into five parts, Balanced Microwave Filters begins with an introduction that presents the fundamentals of balanced lines, circuits, and networks. Part 2 covers balanced transmission lines with common-mode noise suppression, including several types of common-mode filters and the application of such filters to enhance common-mode suppression in balanced bandpass filters. Next, Part 3 examines wideband and ultra-wideband (UWB) balanced bandpass filters with intrinsic common-mode suppression. Narrowband and dual-band balanced bandpass filters with intrinsic common-mode suppression are discussed in Part 4. Finally, Part 5 covers other balanced circuits, such as balanced power dividers and combiners, and differential-mode equalizers with common-mode filtering. In addition, the book: Explores a research topic of increasing interest due to the growing demand of balanced transmission lines and circuits in modern communication systems Includes contributions from prominent worldwide experts in the field Provides readers with the necessary knowledge to analyze and synthesize balanced filters and circuits Balanced Microwave Filters is an important text for R&D engineers, professionals, and specialists working on the topic of microwave filters. Post graduate students and Masters students in the field of microwave engineering and wireless communications, especially those involved in courses related to microwave filters, and balanced filters and circuits will also find it to be a vital resource.

Comprehensive resource detailing the latest advances in microwave and wireless sensors implemented in planar technology Planar Microwave Sensors is an authoritative resource on the subject, discussing the main relevant sensing strategies, working principles, and applications on the basis of the authors’ own experience and background, while also highlighting the most relevant contributions to the topic reported by international research groups. The authors provide an overview of planar microwave sensors grouped by chapters according to their working principle. In each chapter, the working principle is explained in detail and the specific sensor design strategies are discussed, including validation examples at both simulation and experimental level. The most suited applications in each case are also reported. The necessary theory and analysis for sensor design are further provided, with special emphasis on performance improvement (i.e., sensitivity and resolution optimization, dynamic range, etc.). Lastly, the work covers a number of applications, from material characterization to biosensing, including motion control sensors, microfluidic sensors, industrial sensors, and more. Sample topics covered in the work include: Non-resonant and resonant sensors, reflective-mode and transmission-mode sensors, single-ended and differential sensors, and contact and contactless sensors Design guidelines for sensor performance optimization and analytical methods to retrieve the variables of interest from the measured sensor responses Radiofrequency identification (RFID) sensor types, prospective applications, and materials/technologies towards “green sensors” implementation Comparisons between different technologies for sensing and the advantages and limitations of microwave sensors, particularly planar sensors Engineers and qualified professionals involved in sensor technologies, along with undergraduate and graduate students in related programs of study, can harness the valuable information inside Planar Microwave Sensors to gain complete foundational knowledge on the subject and stay up to date on the latest research and developments in the field.

This book describes innovative design solutions for radio-frequency identification (RFID) tags and antennas. Focusing mainly on passive ultra-high-frequency (UHF)-RFID tag antennas, it examines novel approaches based on the use of metamaterial-inspired resonators and other resonant structures as radiating elements. It also offers an exhaustive analysis of the radiation properties of several metamaterial-inspired resonators such as the split ring resonator (SRR) and related structures. Further, it discusses in detail an innovative technology for the RFID tagging of optical discs, which has demonstrated a significant improvement over the state of the art and resulted in a patent. By covering the entire research cycle of theory, design/simulation and fabrication/evaluation of RFID tags and antennas, while also reporting on cutting-edge technologies, the book provides graduate students, researchers and practitioners alike with a comprehensive and timely overview of RFID systems, and a closer look at several radiating structures.

This book presents and discusses alternatives to ordinary transmission lines for the design and implementation of advanced RF/microwave components in planar technology. This book is devoted to the analysis, study and applications of artificial transmission lines mostly implemented by means of a host line conveniently modified (e.g., with modulation of transverse dimensions, with etched patterns in the metallic layers, etc.) or with reactive loading, in order to achieve novel device functionalities, superior performance, and/or reduced size. The author begins with an introductory chapter dedicated to the fundamentals of planar transmission lines. Chapter 2 is focused on artificial transmission lines based on periodic structures (including non-uniform transmission lines and reactively-loaded lines), and provides a comprehensive analysis of the coupled mode theory. Chapters 3 and 4 are dedicated to artificial transmission lines inspired by metamaterials, or based on metamaterial concepts. These chapters include the main practical implementations of such lines and their circuit models, and a wide overview of their RF/microwave applications (including passive and active circuits and antennas). Chapter 5 focuses on reconfigurable devices based on tunable artificial lines, and on non-linear transmission lines. The chapter also introduces several materials and components to achieve tuning, including diode varactors, RF-MEMS, ferroelectrics, and liquid crystals. Finally, Chapter 6 covers other advanced transmission lines and wave guiding structures, such as electroinductive-/magnetoinductive-wave lines, common-mode suppressed balanced lines, lattice-network artificial lines, and substrate integrated waveguides. Artificial Transmission Lines for RF and Microwave Applications provides an in-depth analysis and discussion of artificial transmission lines, including design guidelines that can be useful to researchers, engineers and students.

Technological advancements continue to enhance the field of engineering and have led to progress in branches that include electrical and mechanical engineering. These technologies have allowed for more sophisticated circuits and components while also advancing renewable energy initiatives. With increased growth in these fields, there is a need for a collection of research that details the variety of works being studied in our globalized world. The Handbook of Research on Recent Developments in Electrical and Mechanical Engineering is a pivotal reference source that discusses the latest advancements in these engineering fields. Featuring research on topics such as materials manufacturing, microwave photons, and wireless power transfer, this book is ideally designed for graduate students, researchers, engineers, manufacturing managers, and academicians seeking coverage on the works and experiences achieved in electrical and mechanical engineering.