Testing And Balancing Hvac Air And Water Systems Fifth Edition

Thoroughly revised, this book provides the reader with an understanding of the principles and practices of testing and balancing (TAB) heating, ventilating, and air conditioning (HVAC) air and water systems. For the novice and the experienced testing and balancing technician, it is a field reference book of procedures, equations, and information tables. Divided into five parts, Part I has general and specific balancing procedures for constant air volume systems, variable air volume systems, return air systems, and fans and fan performance. Part II covers testing and balancing fume hood systems and cleanrooms, commissioning HVAC systems, centrifugal pumps and pump performance, analog and digital controls and water balancing procedures using flow meters, system components, and temperatures. Part III covers fans, pumps, air distribution, water distribution, motors, electrical, fluid flow, psychrometrics, refrigeration, and instrument usage and care. Part IV includes equations and tables. New to this edition, Part V has information and additional test and balance procedures and graphics for chapters 1-7 and 13-14. TAB Data and Test forms are in the new addendum as well. • Provides the readers with revised information about the principles and practices of testing and balancing (TAB) heating • Represents a field reference guide for both the novice and experienced testing and balancing technician • Includes a new section with information and additional test and balance procedures and graphics

This fully revised and updated edition of this classic best selling reference provides all the information you will need to evaluate and balance the air and water sides of any HVAC system. The third edition adds new chapters on testing and balancing clean rooms and HVAC system commissioning. Every aspect of testing, adjusting and balancing is addressed, including all types of instruments required, and specific methods to adjust constant volume, single zone, dual duct, induction, and variable air volume systems. Complete details are provided for the full scope of system components, including fans, pumps, motors, drives, and electricity, as well as for balancing devices and instrument usage. All needed equations and a variety of useful conversion tables are included.

Thoroughly revised, this book provides the reader with an understanding of the principles and practices of testing and balancing (TAB) heating, ventilating, and air conditioning (HVAC) air and water systems. For the novice and the experienced testing and balancing technician, it is a field reference book of procedures, equations, and information tables. Divided into five parts, Part I has general and specific balancing procedures for constant air volume systems, variable air volume systems, return air systems, and fans and fan performance. Part II covers testing and balancing fume hood systems and cleanrooms, commissioning HVAC systems, centrifugal pumps and pump performance, analog and digital controls and water balancing procedures using flow meters, system components, and temperatures. Part III covers fans, pumps, air distribution, water distribution, motors, electrical, fluid flow, psychrometrics, refrigeration, and instrument usage and care. Part IV includes equations and tables. New to this edition, Part V has information and additional test and balance procedures and graphics for chapters 1-7 and 13-14. TAB Data and Test forms are in the new addendum as well. • Provides the readers with revised information about the principles and practices of testing and balancing (TAB) heating • Represents a field reference guide for both the novice and experienced testing and balancing technician • Includes a new section with information and additional test and balance procedures and graphics

This reference provides you with all the procedures and information you will need to evaluate and balance the air and water side of any HVAC system.

This fully revised and updated edition of this classic bestselling reference provides all the information needed to evaluate and balance the air and water sides of any HVAC system. The third edition adds new chapters on testing and balancing clean rooms and HVAC system commissioning. The book addresses every aspect of testing, adjusting and balancing, including all types of instruments required and specific methods to adjust constant volume, single zone, dual duct, induction, and variable air volume systems. The author provides complete details for the full scope of system components, including fans, pumps, motors, drives, and electricity, as well as for balancing devices and instrument usage. The book also includes all necessary equations and a variety of useful conversion tables.

This reference provides you with all the procedures and information you will need to evaluate and balance the air and water side of any HVAC system.

This thoroughly revised book will provide the reader with an understanding of the principles and practices of testing and balancing (TAB) heating, ventilating and air conditioning (HVAC) air and water systems. It is for anyone interested in testing and balancing. For the novice and the experienced testing and balancing technician, it is a field reference book of procedures, equations, and information tables. For those interested in getting into TAB or who are new to the HVAC industry, it is a text for learning more about HVAC systems and testing and balancing. For the mechanical engineer, building owner, facility manager, commissioning agency or energy manager, this book can be used for teaching TAB, writing more effective specifications, and learning about TAB and how it interacts with system commissioning, indoor air quality and energy management. It is the intent of this book to improve the communications between owners, mechanical engineers, designers, vendors, contractors, TAB engineers, supervisors, and technicians to ensure that HVAC systems are being thoroughly tested and balanced. This book is used in test and balance self-study courses, in-house training programs, seminars, and other training formats as preparation for TAB certification, and as a text in colleges and technical schools. The sixth edition has general and specific testing and balancing procedures for constant air volume systems, variable air volume systems, return air and exhaust air systems, positive and negative pressure conditioned spaces, and fans and fan performance in Chapters 1 through 9. Chapters 10–12 cover testing and balancing fume hood systems, and cleanrooms and commissioning HVAC systems. Chapters 13 and 14 provide information on water systems and centrifugal pumps including water balancing procedures using flow meters, system components and temperatures, and water pumps and pump performance. Chapter 15 reviews analog and digital controls. Chapters 16–20 cover terminology for fluid flow, psychrometrics, refrigeration ̧ air distribution, water distribution, fans and pumps, motors, electrical, and instrument usage and care. Chapters 21 and 22 are equations and tables.