The Chemistry Of Hydrocarbon Fuels

The Chemistry of Hydrocarbon Fuels is concerned with the chemical aspects of hydrofuels such as coal, petroleum, and natural gas. Topics covered include diagenesis and catagenesis, processing of natural gas and petroleum fractions, coal combustion, and chemicals that can be obtained from fuels. This book is comprised of 14 chapters and begins with a comprehensive treatment of the formation of fuels from accumulated organic matter, along with the organic geochemistry of coal, oil, and gas. The following chapters focus on the composition of hydrocarbon fuels and some of their important physical properties. Production and use of synthesis gas, alternate fuels from coal, and oxygenated fuels are considered. The remaining chapters deal with some of the chemistry of separation, refining, and use of hydrocarbon fuels. This monograph is written primarily for practicing scientists and engineers, fuel scientists, petroleum chemists, and those who are new to the field of fuel science and seek an introduction to fuel chemistry.

Written by an author with over 38 years of experience in the chemical and petrochemical process industry, this handbook will present an analysis of the process steps used to produce industrial hydrocarbons from various raw materials. It is the first book to offer a thorough analysis of external factors effecting production such as: cost, availability and environmental legislation. An A-Z list of raw materials and their properties are presented along with a commentary regarding their cost and availability. Specific processing operations described in the book include: distillation, thermal cracking and coking, catalytic methods, hydroprocesses, thermal and catalytic reforming, isomerization, alkylation processes, polymerization processes, solvent processes, water removal, fractionation and acid gas removal. Flow diagrams and descriptions of more than 250 leading-edge process technologies An analysis of chemical reactions and process steps that are required to produce chemicals from various raw materials Properties, availability and environmental impact of various raw materials used in hydrocarbon processing

This book was written to bring together under one cover a detailed look at the chemistry (and some physics) of combustion of hydrocarbon fuels that will satisfy experts in the field, and at the same time allow the less well prepared student to understand the basic principles involved.

The first strand involves a critical overview of the design of experimental methods used for examining the thermal behaviour of solid fuels [pyrolysis, liquefaction and gasification], while the second will emphasise chemical structures and molecular mass distributions of coal derived tars, extracts and pitches, petroleum-derived asphaltenes, and biomass derived heavy hydrocarbon liquids. Two major, interdependent strands in the study of fossil and renewable fuel utilisation are focused on within this text: (i) Thermal characterisation of solid fuels including various ranks of coals, biomass and waste, and, (ii) The analytical characterisation of heavy hydrocarbon liquids, covering coal, petroleum and biomass derived heavy fractions. Two major, interdependent strands in the study of fossil and renewable fuel utilisation are focused on within this text: (i) Thermal characterisation of solid fuels including various ranks of coals, biomass and waste, and, (ii) The analytical characterisation of heavy hydrocarbon liquids, covering coal, petroleum and biomass derived heavy fractions.

In this historical review the NBS work on hydrocarbons is discussed in terms of the three major classes of natural hydrocarbonaceous fuels: natural gas, petroleum, and coal. The work done on the measurement of properties of the pure components has included measurement of the values of the properties themselves and development of practical and accurate measurement procedures and instruments. In addition, combustion energies, densities, viscosities, vapor pressures, refractive indices, elemental compositions and other parameters have been determined for complex fuel mixtures and correlated to find methods of estimating properties. Extensive standard reference data tables have been compiled and a number of standard reference materials have been developed.

The Chemistry of Catalytic Hydrocarbon Conversions covers the various chemical aspects of catalytic conversions of hydrocarbons. This book is composed of eight chapters that include catalytic synthesis of hydrocarbons from carbon monoxide, hydrogen, and methanol. The opening chapters examine various acid- and base-catalyzed reactions, such as isomerization, polymerization, oligomerization, alkylation, catalytic cracking, reforming, hydrocracking, and hydrogenation. The subsequent chapters are devoted to specific catalytic reactions, including heterogeneous hydrogenation, dehydrogenation, aromatization, and oxidation. Other chapters describe the homogeneous catalysis by transition metal organometallic catalysts and the metathesis of unsaturated hydrocarbons. The concluding chapter deals with the synthesis of liquid hydrocarbon fuels from carbon monoxide, hydrogen, methanol, and dimethyl ether. This book is of great benefit to petroleum chemists, engineers, and researchers.