The Fundamentals Of Corrosion And Scaling For Petroleum Environmental Engineers

Scale, or deposits, can build up in the wellbore tubulars and other downhole components, causing considerable damage to the life of the well. Infrastructure provides the support for the wells system and with oil and gas consumption on the rise and transportation required to feed that demand, all petroleum and pipeline engineers must have accurate corrosion and scaling information. The Fundamentals of Corrosion and Scaling for Petroleum and Environmental Engineers will provide the quick knowledge that engineers need to not only enhance the reliability of corrosion and scale control technologies but also manage scale deposits, prevent fatigue and ensure equipment integrity.

Scale, or deposits, can build up in the wellbore tubulars and other downhole components, causing considerable damage to the life of the well. Infrastructure provides the support for the wells system and with oil and gas consumption on the rise and transportation required to feed that demand, all petroleum and pipeline engineers must have accurate corrosion and scaling information. The Fundamentals of Corrosion and Scaling for Petroleum and Environmental Engineers will provide the quick knowledge that engineers need to not only enhance the reliability of corrosion and scale control technologies but also manage scale deposits, prevent fatigue and ensure equipment integrity.

Oil and gas still power the bulk of our world, from automobiles and the power plants that supply electricity to our homes and businesses, to jet fuel, plastics, and many other products that enrich our lives. With the relatively recent development of hydraulic fracturing ("fracking"), multilateral, directional, and underbalanced drilling, and enhanced oil recovery, oil and gas production is more important and efficient than ever before. Along with these advancements, as with any new engineering process or technology, come challenges, many of them environmental. More than just a text that outlines the environmental challenges of oil and gas production that have always been there, such as gas migration and corrosion, this groundbreaking new volume takes on the most up-to-date processes and technologies involved in this field. Filled with dozens of case studies and examples, the authors, two of the most well-known and respected petroleum engineers in the world, have outlined all of the major environmental aspects of oil and gas production and how to navigate them, achieving a more efficient, effective, and profitable operation. This groundbreaking volume is a must-have for any petroleum engineer working in the field, and for students and faculty in petroleum engineering departments worldwide.

Details the proper methods to assess, prevent, and reduce corrosion in the oil industry using today's most advanced technologies This book discusses upstream operations, with an emphasis on production, and pipelines, which are closely tied to upstream operations. It also examines protective coatings, alloy selection, chemical treatments, and cathodic protection—the main means of corrosion control. The strength and hardness levels of metals is also discussed, as this affects the resistance of metals to hydrogen embrittlement, a major concern for high-strength steels and some other alloys. It is intended for use by personnel with limited backgrounds in chemistry, metallurgy, and corrosion and will give them a general understanding of how and why corrosion occurs and the practical approaches to how the effects of corrosion can be mitigated. Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition updates the original chapters while including a new case studies chapter. Beginning with an introduction to oilfield metallurgy and corrosion control, the book provides in-depth coverage of the field with chapters on: chemistry of corrosion; corrosive environments; materials; forms of corrosion; corrosion control; inspection, monitoring, and testing; and oilfield equipment. Covers all aspects of upstream oil and gas production from downhole drilling to pipelines and tanker terminal operations Offers an introduction to corrosion for entry-level corrosion control specialists Contains detailed photographs to illustrate descriptions in the text Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition is an excellent book for engineers and related professionals in the oil and gas production industries. It will also be an asset to the entry-level corrosion control professional who may have a theoretical background in metallurgy, chemistry, or a related field, but who needs to understand the practical limitations of large-scale industrial operations associated with oil and gas production.

Flow assurance solids deposition is one of the main challenges in oil and gas production operations with millions of dollars spent annually on their mitigation. Essentials of Flow Assurance Solids in Oil and Gas Operations works as an all-inclusive reference for engineers and researchers, covering all the different types of solids that are commonly encountered in oil and gas fields. Structured to flow through real-world operations, the reference branches through each solid deposit problem where the root causes are as well as modeling, monitoring, characterization, and management strategies, all comprehensively reviewed in the light of contemporary research breakthroughs. Backed by several field case studies, Essentials of Flow Assurance Solids in Oil and Gas Operations gives petroleum and reservoir engineers a resource to correlate between the theoretical fundamentals and field practical applications allowing for sustainable and optimal operations. Provides the main operations of oil and gas fields, the characteristics of produced fluids, and the main flow assurance challenges Furnishes the basic principles of deposits formation and mitigation, starting with a full investigation of the problems, then mechanisms, causes, predictions, modelling, and sample analysis, followed by management Distinctively discusses the operational and environmental implications of flow assurance solids and their management using chemical and nonchemical methods Teaches engineers through impactful visuals and data sets included in every chapter

The petroleum and chemical industries contain a wide variety of corrosive environments, many of which are unique to these industries. Oil and gas production operations consume a tremendous amount of iron and steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost of corrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs – natural resources, potential hazards, and lost opportunity. Wasting natural resources is a direct contradiction to the growing need for sustainable development. By selecting the correct material and applying proper corrosion protection methods, these costs can be reduced, or even eliminated. This book provides a minimum design requirement for consideration when designing systems in order to prevent or control corrosion damage safely and economically, and addresses: • Corrosion problems in petroleum and chemical industries • Requirements for corrosion control • Chemical control of corrosive environments • Corrosion inhibitors in refineries and petrochemical plants • Materials selection and service life of materials • Surface preparation, protection and maintainability • Corrosion monitoring - plant inspection techniques and laboratory corrosion testing techniques Intended for engineers and industry personnel working in the petroleum and chemical industries, this book is also a valuable resource for research and development teams, safety engineers, corrosion specialists and researchers in chemical engineering, engineering and materials science.

Production chemistry issues result from changes in well stream fluids, both liquid and gaseous, during processing. Since crude oil production is characterized by variable production rates and unpredictable changes to the nature of the produced fluids, it is essential for production chemists to have a range of chemical additives available for rectifying issues that would not otherwise be fully resolved. Modern production methods, the need to upgrade crude oils of variable quality, and environmental constraints demand chemical solutions. Thus, oilfield production chemicals are necessary to overcome or minimize the effects of the production chemistry problems. Production Chemicals for the Oil and Gas Industry, Second Edition discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. Incorporating the large amount of research and applications since the first edition, this new edition reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references, especially SPE papers and patents. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance—information that is very useful for research and development. Each updated chapter begins by introducing a problem, such as scale or corrosion, for which there is a production chemical. The author then briefly discusses all chemical and nonchemical methods to treat the problem and provides in-depth descriptions of the structural classes of relevant production chemicals. He also mentions, when available, the environmental properties of chemicals and whether the chemical or technique has been successfully used in the field. This edition includes two new chapters and nearly 50 percent more references.

This book presents the state-of-the-art-knowledge on corrosion of steel, cast iron and ductile iron with a focus on corrosion-induced degradation of their mechanical properties. The information presented in the book is largely derived from the most current research on the effect of corrosion on degradation of mechanical properties. The book covers the basics of steel corrosion, including that of cast iron and ductile iron, that are not well covered in most literature. Models for corrosion-induced degradation of mechanical properties are presented in the book with a view to wider applications. The knowledge presented in the book can be used to prevent corrosion-induced failures of corrosion-affected structures, offering enormous benefits to the industry, business, society and community. Key strengths of the book are that it can be employed by a variety of users for different purposes in designing and assessing corrosion-affected structures, and that the knowledge and techniques presented in the book can be easily applied by users in dealing with corrosion-affected structures, and the uniqueness in examining the corrosion effect on degradation of various mechanical properties. Wtih examples of practical applications, the book is particularly useful for all stakeholders involved in steel manufacturing and construction, including engineering students, academicians, researchers, practitioners and asset managers.