The Physics And Chemistry Of Carbides Nitrides And Borides

Carbides, nitrides and borides are families of related refractory materials. Traditionally they have been employed in applications associated with engineering ceramics where either high temperature strength or stability is of primary importance. In recent years there has been a growing awareness of the interesting electrical, thermal and optical properties exhibited by these materials, and the fact that many can be prepared as monolithic ceramics, single crystals and thin films. In practical terms carbides, nitrides and borides offer the prospect of a new generation of semiconductor materials, for example, which can function at very high temperatures in severe environmental conditions. However, as yet, we have only a limited understanding of the detailed physics and chemistry of the materials and how the preparation techniques influence the properties. Under the auspices of the NATO Science Committee an Advanced Research Workshop (ARW) was held on the Physics and Chemistry of Carbides, Nitrides and Borides (University of Manchester, 18-22 September, 1989) in order to assess progress to date and identify the most promising themes and materials for future research. An international group of 38 scientists considered developments in 5 main areas: The preparation of powders, monolithic ceramics, single crystals and thin films; Phase transformations, microstructure, defect structure and mass transport; Materials stability; Theoretical studies; Electrical, thermal and optical properties of bulk materials and thin films.

A survey of current research on a wide range of carbide, nitride and boride materials, covering the general issues relevant to the development and characterisation of a variety of advanced materials. Topics include structure and electronic properties, modeling, processing, high-temperature chemistry, oxidation and corrosion, mechanical behaviour, manufacturing and applications. The volume complements more specialised books on specific materials as well as more general texts on ceramics or hard materials, presenting a survey of materials research as a key to technological development. After decades of research, the materials are being used in electronics, wear resistant, refractory and other applications, but numerous new applications are possible. Roughly equal numbers of papers cover theoretical and experimental research in the general field of materials science of refractory materials. Audience: Researchers and graduate students in materials science and engineering.

Refractory Materials, Volume 7: Transition Metal Carbides and Nitrides discusses the developments in transition metal carbide and nitride research. This volume is organized into nine chapters that emphasize the mechanical and superconducting properties of these compounds. The introductory chapters deal with the general properties, preparation techniques, characterization, crystal chemistry, phase relationships, and thermodynamics of transition metal carbides and nitrides. The following chapter highlights the mechanical properties of these compounds, such as elastic and plastic deformation, fracture, strengthening mechanisms, and hardness. The discussion then shifts to specific electrical and magnetic properties, including electrical resistivity, Hall coefficient, and magnetic susceptibility. A separate chapter is devoted to carbides and nitrides as superconductors. The concluding chapters explore certain theories that explain the mechanisms of band structure and bonding in carbides and nitrides. This volume is of great value to research workers in metallurgy, ceramics, physics, chemistry, and related fields, as well as to advanced students investigating problems concerning high temperature materials or interstitial compounds.

An exploration of electric refractory materials, this book covers developments of blue light-emitting diodes using GaN-based nitrides for laser and high-temperature and -frequency devices. Electric Refractory Materials introduces growth and evaluation standards of films and bulk crystals, with consideration of band structure, surface electronic structure, and lattice vibrations. It also covers heat capacity and thermal conductivity, irradiation properties, and selective surfaces. Focusing on diamond material, the book examines its synthesis and characterization as well as its electrical, optical, and conductive properties. The book also discusses the use of silicon carbide, boron compounds, and other material used in electronic and light-emitting devices.

This book arose from a symposium titled 'Transition Metal Carbides and Nitrides: Preparation, Properties, and Reactivity' organized by Jae Sung Lee, Masatoshi Nagai and myself. The symposium was part of the 1995 Congress of Pacific Rim Chemical Societies, held in Honolulu, Hawaii between December 17-22, 1995. The meeting was the first major conference to exclusively address the theme of metal carbides and nitrides, and brought together many of the major researchers in the field. Over 50 scientists and engineers reported their latest findings in five sessions of presentations and discussions. The book closely follows the topics covered in the conference: Theory of bonding Structure and composition Catalytic properties Physical properties New methods of preparation Spectroscopy and microscopy The book is unique in its coverage. It provides a general introduction to the properties and nature of the materials, but also covers their latest applications in a wide variety of fields. It should thus be of interest to both experts and nonexperts in the fields of material science, solid-state chemistry, physics, ceramics engineering, and catalysis. The first chapter gives an overview, and many of the chapters provide summaries of advanced topics. All contributions were peer-reviewed.

Carbide, Nitride and Boride Materials Synthesis and Processing is a major reference text addressing methods for the synthesis of non-oxides. Each chapter has been written by an expert practising in the subject area, affiliated with industry, academia or government research, thus providing a broad perspective of information for the reader. The subject matter ranges from materials properties and applications to methods of synthesis including pre- and post-synthesis processing. Although most of the text is concerned with the synthesis of powders, chapters are included for other materials such as whiskers, platelets, fibres and coatings. Carbide, Nitride and Boride Materials Synthesis and Processing is a comprehensive overview of the subject and is suitable for practitioners in the industry as well as those looking for an introduction to the field. It will be of interest to chemical, mechanical and ceramic engineers, materials scientists and chemists in both university and industrial environments working on or with refractory carbides, nitrides and borides.

This exhaustive work in three volumes and over 1300 pages provides a thorough treatment of ultra-high temperature materials with melting points over 2500 °C. The first volume focuses on Carbon and Refractory Metals, whilst the second and third are dedicated solely to Refractory compounds and the third to Refractory Alloys and Composites respectively. Topics included are physical (crystallographic, thermodynamic, thermo physical, electrical, optical, physico-mechanical, nuclear) and chemical (solid-state diffusion, interaction with chemical elements and compounds, interaction with gases, vapours and aqueous solutions) properties of the individual physico-chemical phases of carbon (graphite/graphene), refractory metals (W, Re, Os, Ta, Mo, Nb, Ir) and compounds (oxides, nitrides, carbides, borides, silicides) with melting points in this range. It will be of interest to researchers, engineers, postgraduate, graduate and undergraduate students alike. The reader is provided with the full qualitative and quantitative assessment for the materials, which could be applied in various engineering devices and environmental conditions at ultra-high temperatures, on the basis of the latest updates in the field of physics, chemistry, materials science and engineering.