Three Dimensional Velocity And Vorticity Measuring And Image Analysis Techniques

The contents of this volume reflect to a large extent the efforts made by a group of Institutes at the ETH Zürich to develop new techniques for measurements of flows in fluids in the last decade. The motivation came from the study of tr~sport and mixing processes in natural and industrial systems. One of the characteristic properties of turbulence is its high mixing efficiency. The techniques developed are therefore suitable, although not exclusively, for turbulence measurements. They can be subdivided into point-measurements and field-measurements. The aim of the point-measurements developed is to determine the three components of the velocity and all their first derivatives with good temporal resolution and accuracy in turbulent flows. The old and weIl established method of hot-wire anemometry was used for this purpose. One of the main achievements in this context is the construction of miniature multi-wire probes. This technique was introduced to the Institute of Hydromechanics and Water Resources Management of ETH Zürich by Profs. A. Tsinober and E. Kit from Tel-Aviv University. This was made possible by the generous financial support by ETH, for which I would like to express my gratitude on this occasion. In addition, Dr. F.E. Joergensen from DANTEC contributed an example of recent developments in the hardware ofConstant Temperature Anemometry (CTA), for which I am very thankful.

Accompanying DVD-ROM contains ... "all chapters of the Springer Handbook."--Page 3 of cover.

Results from several applications of particle image velocimetry (PIV) to unsteady flows at a laboratory scale have been published, and commercial products are now available for more general laboratory use, but for certain industrially important applications, reliable equipment is often available only from in-house research and development teams. This PIV handbookis intended to transfer know-how from PIV development laboratories to end-users in industry and universities. The book discusses the scientific and technical aspects required to set up a PIV system, allows users to assess the problems involved in the application of PIV, and enables them to design, optimize, and use PIV systems to meet their special needs.

This is the 2nd edition of the book, Flow Visualization: Techniques and Examples, which was published by Imperial College Press in 2000. Many of the chapters have been revised and updated to take into consideration recent changes in a number of flow visualization and measurement techniques, including an updated high quality flow gallery. Unique among similar publications, this book focuses on the practical rather than theoretical aspects. Obtaining high quality flow visualization results is, in many ways, more of an art than a science, and experience plays a key deciding role. The depth and breadth of the material will make this book invaluable to readers of all levels of experience in the field. Sample Chapter(s) Chapter 1: Interpretation of Flow Visualization (4,633 KB) Chapter 2: Hydrogen Bubble Visualization (15,745 KB) Contents:Interpretation of Flow VisualizationHydrogen Bubble VisualizationDye and Smoke VisualizationMolecular Tagging Velocimetry and ThermometryPlanar Imaging of Gas Phase FlowsDigital Particle Image VelocimetrySurface Temperature Sensing with Thermochromic Liquid CrystalsPressure and Shear Sensitive CoatingsMethods for Compressible FlowsThree-Dimensional ImagingQuantitative Flow Visualization via Fully Resolved Four-Dimensional ImagingVisualization, Feature Extraction, and Quantification of Numerical Visualizations of High-Gradient Compressible FlowsColor Plates and Flow Gallery Readership: Undergraduate and graduate students as well as researchers in flow visualization. Keywords:Dye and Smoke Visualization;Hydrogen Bubble;Qualitative and Quantitative Flow Visualization;Digital Particle Image Velocimetry;Molecular Tagging Velocimetry;Laser ImagingKey Features:Each chapter of the book is written by an expert (or experts) in the fieldThe book includes a flow gallery of high quality flow visualization imagesThe depth and breadth of the material will make it invaluable to readers of all levels of experience in flow visualizationReviews: “The book combines a broad overview with a deep insight into the field of flow visualization. The pros and cons of each method and pitfalls in the interpretation of measurements results are discussed. Many practical tips are given. The book is very useful for students and researchers. It is highly recommended.” ZAMM Journal

The use of optical methodology, instrumentation and photonics devices for imaging, vision and optical sensing is of increasing importance in understanding our marine environment. Subsea optics can make an important contribution to the protection and sustainable management of ocean resources and contribute to monitoring the response of marine systems to climate change. This important book provides an authoritative review of key principles, technologies and their applications. The book is divided into three parts. The first part provides a general introduction to the key concepts in subsea optics and imaging, imaging technologies and the development of ocean optics and colour analysis. Part two reviews the use of subsea optics in environmental analysis. An introduction to the concepts of underwater light fields is followed by an overview of coloured dissolved organic matter (CDOM) and an assessment of nutrients in the water column. This section concludes with discussions of the properties of subsea bioluminescence, harmful algal blooms and their impact and finally an outline of optical techniques for studying suspended sediments, turbulence and mixing in the marine environment. Part three reviews subsea optical systems technologies. A general overview of imaging and visualisation using conventional photography and video leads onto advanced techniques like digital holography, laser line-scanning and range-gated imaging as well as their use in controlled observation platforms or global observation networks. This section also outlines techniques like Raman spectroscopy, hyperspectral sensing and imaging, laser Doppler anemometry (LDA) and particle image velocimetry (PIV), optical fibre sensing and LIDAR systems. Finally, a chapter on fluorescence methodologies brings the volume to a close. With its distinguished editor and international team of contributors, Subsea optics and imaging is a standard reference for those researching, developing and using subsea optical technologies as well as environmental scientists and agencies concerned with monitoring the marine environment. Provides an authoritative review of key principles, technologies and their applications Outlines the key concepts in subsea optics and imaging, imaging technologies and the development of ocean optics and colour analysis Reviews the properties of subsea bioluminescence, harmful algal blooms and their impact

This volume includes revised and extended versions of selected papers presented at the Tenth International Symposium on Applications of Laser Techniques to Fluid Mechanics held at the Calouste Gulbenkian Foundation in Lisbon, during the period of July 10 to 13, 2000. The papers describe instrumentation developments for Velocity, Scalar and Multi-Phase Flows and results of measurements of Turbulent Flows, and Combustion and Engines. The papers demonstrate the continuing and healthy interest in the development of understanding of new methodologies and implementation in terms of new instrumentation. The prime objective of the Tenth Symposium was to provide a forum for the presentation of the most advanced research on laser techniques for flow measurements, and communicate significant results to fluid mechanics. The application of laser techniques to scientific and engineering fluid flow research was emphasized, but contributions to the theory and practice of laser methods were also considered where they facilitate new improved fluid mechanic research. Attention was placed on laser-Doppler anemometry, particle sizing and other methods for the measurement of velocity and scalars, such as particle image velocimetry and laser induced fluorescence.

The aeronautics industry is presently aiming for faster design cycles and shorter time to market of new aircraft. It is looking at the same time for improved aerodynamic performance, for evident competitive reasons. Advanced, computer based design systems, including fast and reliable numerical flow solvers, have been developed in the last decade including new turbulence models. On the experimental side, measurement techniques in general have also been improved significantly, however the data evaluation process remains still very time consuming, and unsteady effects and turbulence are often not being captured with sufficient accuracy and detail. The development of Particle Image Velocimetry (PIV) has helped to improve the analysis of the flow fields. After investigations in laboratory scale wind tunnels, a joint initiative on PIV research, by the European Aerospace Research Establishments, within GARTEUR have enabled a wide breakthrough of this new technology in Europe. Within the Research Framework Program of the European Union, the joint research project EUROPIV aimed to apply PIV technology to problems of industrial interest.

A systematic treatment, based on Green's functions and integral equations, is given to the analytical and numerical methods and results for a great number of 3-D contact problems for elastic bodies. Semi-bounded elastic bodies (layer, cylinder, space with cylindrical or spherical cavity, 3-D wedge, special cases of which are half- and quarter-spaces, cone) and finite elastic bodies (circular plate, finite cylinder, spherical layer, spherical lens, sphere) are considered. Methods introduced in the book can also be applied in fracture mechanics, hydrodynamics, electrostatics, thermodynamics and diffusion theory, continuum mechanics, and mathematical physics, as well as by engineers and students in mathematics, mechanics, and physics.