Vertical Turbulent Buoyant Jets

The Science & Applications of Heat and Mass Transfer: Reports, Reviews, & Computer Programs, Volume 6: Turbulent Buoyant Jets and Plumes focuses on the formation, properties, characteristics, and reactions of turbulent jets and plumes. The selection first offers information on the mechanics of turbulent buoyant jets and plumes and turbulent buoyant jets in shallow fluid layers. Discussions focus on submerged buoyant jets into shallow fluid, horizontal surface or interface jets into shallow layers, fundamental considerations, and turbulent buoyant jets (forced plumes). The manuscript then examines a turbulence model for buoyant flows and its application to vertical buoyant jets, including mathematical model, calculation of vertical buoyant jets, and explanation of velocity and temperature spreading in pure jets and pure plumes. The publication is a dependable reference for scientists and readers interested in turbulent buoyant jets and plumes.

Jets and plumes are shear flows produced by momentum and buoyancy forces. Examples include smokestack emissions, fires and volcano eruptions, deep sea vents, thermals, sewage discharges, thermal effluents from power stations, and ocean dumping of sludge. Knowledge of turbulent mixing by jets and plumes is important for environmental control, impact and risk assessment. Turbulent Jets and Plumes introduces the fundamental concepts and develops a Lagrangian approach to model these shear flows. This theme persists throughout the text, starting from simple cases and building towards the practically important case of a turbulent buoyant jet in a density-stratified crossflow. Basic ideas are illustrated by ample use of flow visualization using the laser-induced fluorescence technique. The text includes many illustrative worked examples, comparisons of model predictions with laboratory and field data, and classroom tested problems. An interactive PC-based virtual-reality modelling software (VISJET) is also provided. Engineering and science students, researchers and practitioners may use the book both as an introduction to the subject and as a reference in hydraulics and environmental fluid mechanics.

A broad effort is being conducted to develop an operational Warm Fog Dispersal System (WFDS) using ground-based heat sources. In order to determine the optimum heat and thrust for the combustors in the WFDS, investigations have been made of the buoyant motion in round- and plane-heated turbulent jets in co-flowing (that is, same direction) wind fields. This report describes a method of calculating the round jet case. The method can be used for jet velocities of 100m/sec or less, wind velocities below or equal to the jet velocity, and jet temperatures up to 3 times the ambient value. Initial jet velocities of 5 and 20m/sec and temperature excesses, relative to the ambient temperature, of .3 and 1 were selected for the calculations.