Welding Of Aluminum And Aluminum Alloys

The Welding of Aluminium and its Alloys is a practical user's guide to all aspects of welding aluminium and aluminium alloys. It provides a basic understanding of the metallurgical principles involved showing how alloys achieve their strength and how the process of welding can affect these properties. The book is intended to provide engineers with perhaps little prior understanding of metallurgy and only a brief acquaintance with the welding processes involved with a concise and effective reference to the subject. It is intended as a practical guide for the Welding Engineer and covers weldability of aluminium alloys; process descriptions, advantages, limitations, proposed weld parameters, health and safety issues; preparation for welding, quality assurance and quality control issues along with problem solving. The book includes sections on parent metal storage and preparation prior to welding. It describes the more frequently encountered processes and has recommendations on welding parameters that may be used as a starting point for the development of a viable welding procedure. Included in these chapters are hints and tips to avoid some of the pitfalls of welding these sometimes-problematic materials. The content is both descriptive and qualitative. The author has avoided the use of mathematical expressions to describe the effects of welding. This book is essential reading for welding engineers, production engineers, production managers, designers and shop-floor supervisors involved in the aluminium fabrication industry. A practical user's guide by a respected expert to all aspects of welding of aluminium Designed to be easily understood by the non-metallurgist whilst covering the most necessary metallurgical aspects Demonstrates best practice in fabricating aluminium structures

This publication is a comprehensive book on the welding of aluminium, aimed primarily at practising engineers and students of welding technology. After describing the properties of wrought and cast aluminium alloys, their applications, alloy designations and composition, both in heat-treatable and non heat-treatable alloys, it goes on to explain the process variables in weld metal transfer mechanisms, the ways of overcoming problems in GAS tungsten ARC welding, and distortion - also providing numerical methods of analysis. A thorough and timely guide to all aspects of aluminium welding.

The purpose of this report is to summarize the present state of aluminum-welding technology. The major topics covered are: Basic metallurgy of various heat-treatable and non-heat-treatable alloy classes; welding processes used for joining aluminum with emphasis on newer processes and procedures which are considered important in defense metals industries; welding characteristics of various alloys; comparison of tensile properties, cracking tendencies, notch toughness, and stress-corrosion characteristics of various weldments; dissimilar metal welds; and causes of porosity and cracking of aluminum welds and the effect of porosity on weld strength. (Author).

This memorandum describes the fusion-welding characteristics, mechanical properties, and stress-corrosion behavior of high-strength, weldable aluminum alloys. These are defined as alloys in which sound welds can be produced and in which at least 50 and 70 percent of the maximum base-metal strength can be retained in the as-welded and post-weld-treated conditions, respectively. Careful selection of joining method and filler metals as well as close control of joining-process parameters is necessary to produce high-strength aluminum weldments. Highest strengths and weld-joint efficiencies in high-strength weldable alloys are achieved with the use of postweld aging and/or mechanical treatments. The best combination of highest strengths and good welding characteristics is found in the 2000 and 7000 alloy series. As compared with the 2000 and 5000 alloy series, the 7000 alloy as a class suffer three major property disadvantages: (1) their tendency to be notch sensitive, (2) their tendency to exhibit low toughness at low temperatures, and (3) their much greater susceptibility to stress-corrosion cracking. Nonetheless, several relatively new 7000 series alloys have been developed which show reasonably good notch toughness to -423 F and which are considered competitive with the 2219 and 2014 alloys for cryogenic applications. (Author).

Friction Stir Processing of 2XXX Aluminum Alloys including Al-Li Alloys is the latest edition in the Friction Stir Welding and Processing series and examines the application of friction stir welding to high strength 2XXX series alloys, exploring the past and current developments in the field. The book features recent research showing significant benefit in terms of joint efficiency and fatigue performance as a result of friction stir welding. Friction stir welding has demonstrated significant benefits in terms of its potential to reduce cost and increase manufacturing efficiency of industrial products including transportation, particularly the aerospace sector. The 2XXX series aluminum alloys are the premium aluminum alloys used in aerospace. The book includes discussion of the potential future directions for further optimization, and is designed for both practicing engineers and materials scientists, as well as researchers in the field. Provides comprehensive coverage of friction stir welding of 2XXX series alloys Discusses the physical metallurgy of the alloys Includes physical metallurgy-based guidelines for obtaining high joint efficiency Features illustrated examples of the application of FSW in the aerospace industry

This one-stop reference is a tremendous value and time saver for engineers, designers and researchers. Emerging technologies, including aluminum metal-matrix composites, are combined with all the essential aluminum information from the ASM Handbook series (with updated statistical information).