Wind Induced Motion Of Tall Buildings

This state-of-the-art report describes various facets of the human response to wind-induced motion in tall buildings and identifies design strategies to mitigate the effects of such motion on building occupants.

This book focuses on recent and innovative methods on vibration analysis, system identification, and diverse control design methods for both wind energy conversion systems and vibrating systems. Advances on both theoretical and experimental studies about analysis and control of oscillating systems in several engineering disciplines are discussed. Various control devices are synthesized and implemented for vibration attenuation tasks. The book is addressed to researchers and practitioners on the subject, as well as undergraduate and postgraduate students and other experts and newcomers seeking more information about the state of the art, new challenges, innovative solutions, and new trends and developments in these areas. The six chapters of the book cover a wide range of interesting issues related to modeling, vibration control, parameter identification, active vehicle suspensions, tuned vibration absorbers, electronically controlled wind energy conversion systems, and other relevant case studies.

Proceedings of a session at the ASCE Convention, held in Seattle, Washington, April 8, 1986. Sponsored by the Aerodynamics Committee of the Aerospace Division and the Wind Effects Committee of the Structural Division of ASCE. This collection contains six papers examining the motions of buildings produced by wind. The trend towards higher structural efficiency and lower cost has resulted in a generation of lighter and more flexible buildings with a lower inherent capacity for energy dissipation or damping. Unfortunately, this trend has produced structures that are more sensitive to the dynamic action of wind. The emphasis in the design of modern tall buildings has therefore shifted to requirements that control building movements or drift and that limit wind-induced accelerations. Two papers deal with the action of wind on two important tall buildings where designers relied on wind tunnel model tests for information on wind-induced loads and building motions. The design of the Columbia Seafirst Center took advantage of economies possible as a result of wind tunnel studies., and viscoelastic dampers were added to limit the building's motion and wind-induced acceleration. The recorded response of the Allied Bank Plaza during Hurricane Alicia is an extremely important contribution to the understanding of the action of wind on tall buildings; this is the only existing record of the response of a major building under the action of design winds. Another paper discusses a survey of structural damping found in tall buildings, presenting typical damping values for steel and concrete buildings and discussing the variability of such estimates and its implication on design. The final papers consider damping systems that can be added to tall buildings in order to limit their motion. The use of tuned mass dampers and viscoelastic damping units is discussed and examples are presented to show their practical effectiveness. The viscoelastic dampers used in the Columbia Seafirst Center are described.

Damping Technologies for Tall Buildings provides practical advice on the selection, design, installation and testing of damping systems. Richly illustrated with images and schematics, this book presents expert commentary on different damping systems, giving readers a way to accurately compare between different device categories and gain and understand the advantages and disadvantages of each. In addition, the book covers their economical and sustainability implications. Case studies are included to provide a direct understanding on the possible applications of each device category. Provides an expert guide on the selection and deployment of the various types of damping technologies Drawn from extensive contributions from international experts and research projects that represent the current state-of-the-art and design in damping technologies Includes 25+ real case studies collected with very detailed information on damping design, installation, testing and other building implications

This book serves as a textbook for advanced courses as it introduces state-of-the-art information and the latest research results on diverse problems in the structural wind engineering field. The topics include wind climates, design wind speed estimation, bluff body aerodynamics and applications, wind-induced building responses, wind, gust factor approach, wind loads on components and cladding, debris impacts, wind loading codes and standards, computational tools and computational fluid dynamics techniques, habitability to building vibrations, damping in buildings, and suppression of wind-induced vibrations. Graduate students and expert engineers will find the book especially interesting and relevant to their research and work.

Bridging the gap between wind and structural engineering, Wind Loading of Structures demonstrates the application of wind engineering principles to ensure maximum safety in a variety of structures. This book will assist the practising engineer in understanding the principles of wind engineering, and provide guidance on the successful design of structures for wind loading by gales, hurricanes, typhoons, thunderstorm downdrafts and tornados. The principles of meteorology, statistics and probability, aerodynamics and structural dynamics are covered in the first half of the book. The second half describes, qualitatively and quantitatively, the nature of wind loads on all types of structures, including low-rise and tall buildings, large stadium roofs, towers and chimneys, bridges, transmission lines, free-standing walls and roofs, and antennae. Special features include coverage of extreme winds in tropical and sub-tropical climates, wind-tunnel testing techniques, a summary of the wind climates of over sixty countries, and detailed coverage of internal as well as external wind pressures on buildings. A comparison is made of the provisions for wind loads in six major national and international codes and standards. Examples and case studies are given in each chapter that make the book suitable for supporting university graduate courses in wind loading and response.

Globally there is much interest in environmental vibrations, as caused by all forms of traffic, by construction activities and factory operations, and by other man-made sources. The focus is on prediction, control and mitigation to benefit our quality of life, and also to improve the operation of sensitive machines in high-tech production. The Japanese Geotechnical Society, the Architectural Institute of Japan, the Japanese Society of Civil Engineering and the Chinese Society for Vibration Engineering came together to organise this International Symposium on Environmental Vibrations at Okayama University, from September 20th to September 22nd, 2005. This book contains the proceedings of this meeting, recording the international exchange of experience, knowledge and research presented at the conference. Both invited and submitted papers are included, written by eminent academic professionals and engineering specialists. It includes topical areas of environmental vibrations, as well as referring to expertise and practices in related fields, these include: wave propagation in soils; soil dynamics; soil-structure dynamic interaction; field measurement of environmental vibration; monitoring of environmental vibrations; development of vibration mitigation measures; evaluation of environmental vibrations; effects of vibration on human perception; effects of vibration on high-precision machines. Both the research community and professionals in the field of environmental vibrations will find this an excellent resource.

A new edition of Francis D.K. Ching's illustrated guide to structural design Structures are an essential element of the building process, yet one of the most difficult concepts for architects to grasp. While structural engineers do the detailed consulting work for a project, architects should have enough knowledge of structural theory and analysis to design a building. Building Structures Illustrated takes a new approach to structural design, showing how structural systems of a building—such as an integrated assembly of elements with pattern, proportions, and scale—are related to the fundamental aspects of architectural design. The book features a one-stop guide to structural design in practice, a thorough treatment of structural design as part of the entire building process, and an overview of the historical development of architectural materails and structure. Illustrated throughout with Ching's signature line drawings, this new Second Edition is an ideal guide to structures for designers, builders, and students. Updated to include new information on building code compliance, additional learning resources, and a new glossary of terms Offers thorough coverage of formal and spatial composition, program fit, coordination with other building systems, code compliance, and much more Beautifully illustrated by the renowned Francis D.K. Ching Building Structures Illustrated, Second Edition is the ideal resource for students and professionals who want to make informed decisions on architectural design.