Working Party Report On The Use Of Corrosion Inhibitors In Oil And Gas Production Efc 39

This practical industry-orientated guide has been compiled to meet the needs of personnel employed by operators, design engineers, contractors and chemical suppliers working in the oil and gas industry. The document draws on the experience of specialists employed in various organisations and incorporates appropriate industry and in-company guidelines. Both technical and management issues are addressed and key points are provided at the end of each chapter to aid in the assimilation of the many and varied aspects that contribute to successful corrosion inhibition.

"This practical industry-oriented guide has been compiled to meet the needs of personnel employed by operators, design engineers, contractors and chemical suppliers working in the oil and gas industry. The document draws on the experience of specialists employed in various organisations and incorporates appropriate industry and in-company guidelines. Both technical and management issues are addressed and key points are provided at the end of each chapter to aid in the assimilation of the many and varied aspects that contribute to successful corrosion inhibition."--BOOK JACKET.

This book is a review of corrosion and thermal protection topics associated with coatings applied in high temperature applications, namely catalytic converters, combustion and steam environments, and gas turbines. Information on corrosion influencing mechanisms and their impact are reviewed.

Corrosion remains one of the key issues affecting the performance and availability of nuclear power plants. Therefore, reliable in-plant corrosion monitoring methods are essential both for the future operation of existing plants and to ensure the safety of future nuclear waste disposal systems. In two parts, this book was stimulated by a workshop organised by EFC Working Party 4 on Nuclear Corrosion and the European Cooperative Group on Corrosion Monitoring of Nuclear Materials (EGC-COMON). The first part deals mainly with research into the detection of stress corrosion crack initiation in nuclear power plant environments (essentially high temperature water at around 300 °C) by various methods, particularly the electrochemical noise technique but also including the electrochemical impedance, acoustic emission and direct current potential drop methods. The second part addresses the goal to develop in-situ techniques and includes examples of the application of electrochemical corrosion potential monitoring. This book will be of particular interest to scientists and engineers concerned with the mitigation of corrosion in nuclear systems.

Engineers with an interest in the marine environment can take advantage of many years of accumulated corrosion experience in a quick and concise manner with this publication. It covers the corrosion behavior in sea water of steel, stainless steel and cast iron as well as alloys of copper, aluminum, nickel and titanium. Applications, commonly-used alloy compositions and mechanical properties are also covered for each alloy system, plus a special section is devoted to galvanic corrosion and its avoidance.

This book addresses the selection and qualification of corrosion resistant alloys for use in oil and gas field production facilities that handle raw and partly processed reservoir fluids at, and below, reservoir temperatures.

In the different disposal concepts for high-level nuclear waste, corrosion of the metallic barriers and in particular the overpack/container is a major issue. It is imperative for performance assessment to predict the lifetime of these containers. In the lifetime prediction of metallic barriers for the disposal of high level nuclear waste (HLW) or of spent fuel, the presence of (reduced) sulphur species is an issue of growing importance, as the sulphur species are involved in localised corrosion phenomena. The international workshop on Sulphur-Assisted Corrosion in Nuclear Waste Disposal Systems (SACNUC2008) aimed to provide an exchange of information on the influence of sulphur species on the corrosion of metallic barriers. This workshop was a co-organisation of the Belgian Nuclear Research Centre, SCK*CEN, and the Belgian Agency for the Management of Radioactive Waste and Enriched Fissile Materials, ONDRAF/NIRAS, under the auspices of the European Federation of Corrosion (EFC event N 311). The proceedings are divided into five chapters: Chapter 1 provides a general overview of the disposal concepts of nuclear waste and the role of corrosion. Chapter 2 explains the mechanism of sulphur-induced corrosion processes. This chapter also contains information from outside the nuclear disposal field in which sulphur is known to act as a detrimental factor (e.g. oil and gas industry). Chapter 3 addresses the role of microbial processes in sulphur-assisted corrosion. Chapter 4 covers the modelling of sulphide-assisted corrosion. Chapter 5 is devoted to a panel discussion aiming to identify open issues in the investigation of sulphur-assisted corrosion phenomena and how to incorporate these in robust lifetime prediction of metallic barriers.