Yb T 2011 2004 Translated English Of Chinese Standard Ybt 2011 2004 Yb T2011 2004 Ybt2011 2004

This Standard specifies the definition, order contents, size, shape, weight, permissible deviation, technical requirements, test methods, inspection rules, transportation, storage, marking and quality certificate of continuous casting square and rectangular blank of non-alloy steel, low alloy steel, and alloy steel.

This Standard specifies the definition, order contents, dimensions, appearance, weight as well as allowable deviation, technical requirements, test methods, inspection rules, transport, storage, marks, and quality certificate of non-alloy steel, low-alloy steel, and alloy-steel continuous casting square and rectangular blank.

This Standard specifies the designations, technical requirements, test methods, packaging, marking, storage, transport, and quality certificates of silica fume for unshaped refractory. This Standard applies to that when smelting ferrous alloys or industrial silicon, silicabearing fume are gathered by fume hoods; after oxidized and agglomerated, silica fume is collected through dry dust collectors.

This Standard specifies the product classification, requirements, test methods, inspection rules and marking, packaging, transportation and storage of skin tonic. This Standard applies to water-based skin care products that supplement the water needed by the skin and protect the skin.

This standard specifies the marking content, marking pattern, marking method and size, paint color of valve of various general-purpose valves. This standard applies to all types of general-purpose valves.

This part specifies the hydrofluoric acid gravimetric method to determine silicon dioxide. This part applies to the determination of silicon dioxide in silica refractories. Measuring range (mass fraction) is greater than 95.00%.

This Standard specifies the terms, definitions, classification, marks, requirements, test methods, inspection rules, symbols, packaging and storage of the flat fillet clothing for carding process. This Standard is applicable to the flat clothing using the fillet clothing as carding element.

This Standard specifies the product classification, basic parameters, connection dimension, usability, technical conditions, test methods, inspection rules, marking, packaging, storage, transportation, etc. of flared (nominal inner-diameter of 5mm~31.5mm), ferrule (nominal inner-diameter of 5mm~38mm), welding (or quick-change, nominal inner-diameter of 5mm~51mm), flange, and 24-degree cone sealing steel wire reinforced hydraulic rubber hose assemblies and steel-wire-wound reinforced hydraulic rubber hose assemblies.