Additives For Plastics

This book deals with the most important substances used as additives in the plastics industry to improve the properties of polymer-based materials. Each chapter deals with a particular type of additive based on the type's definition, structure, and classification according to main effects on polymeric materials. The mechanism of the additive efficiency and its effects on basic properties of specific polymers are discussed and a survey of its important qualities and practical applications is given. Each chapter is introduced by a theoretical analysis of the practical and technological importance of the ad ditive. The book is mainly intended for students in technical colleges, polytechnics and universities who are studying plastics technology and macromolecular chemistry as part of their general curriculum and for technologists in industry engaged in development, sales, technical service and production functions, and applications of plastics. An elementary knowledge of chemistry, physical chemistry and polymer science at the technical college level is assumed. Prague and Montreal, December 1982 J. Stepek, H. Daoust Table of Contents Introduction .

Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.

“Plastics Additives and Testing” is a practical book for engineers and operators and discusses both inorganic and organic chemicals that are widely used as additives in plastics processing operations. It is common practice today to use analytical techniques to improve plastics processing. Because it is critically important to manufacture quality products, a reasonable balance must be drawn between control requirements and parameters for improved processing method with respect to plastics additives. This book serves to implement this balance in the manufacturing line. Written by a successful, international consultant with an excellent publishing track record, it combines plastics additives, testing and quality control and is a valuable and critical book for engineers and operators to have when performing their tasks.

Both technically and economically, additives form a large and increasingly significant part of the polymer industry, both plastics and elastomers. Since the first edition of this book was published, there have been wide-ranging developments, covering chemistry and formulation of new and more efficient additive systems and the safer use of additives, both by processors in the factory and, in the wider field, as they affect the general public. This new edition follows the successful formula of its predecessor, it provides a comprehensive view of all types of additives, concentrating mainly on their technical aspects (chemistry/formulation, structure, function, main applications) with notes on the commercial background of each. The field has been expanded to include any substance that is added to a polymer to improve its use, so including reinforcing materials (such as glass fibre), carbon black and titanium dioxide. This is a book which has been planned for ease of use and the information is presented in a way which is appropriate to the users' needs.

A must for experts in industry, this book describes the application of vibrational (FTIR, UV, Raman) and mass spectrometries and other instrumental techniques for identification and structure elucidation of plastics additives. Numerous tables and figures compress the state of the art.

Polymers have undoubtedly changed the world through many products that improve our lives. However, additives used to modify the overall characteristics of these materials may not be fully disclosed or understood. These additives may present possible environmental and health hazards. It is important to monitor consumer products for these compounds using high-quality reference materials and dependable analytical techniques. The Handbook for the Chemical Analysis of Plastic and Polymer Additives, Second Edition provides the necessary tools for chemists to obtain a more complete listing of additives present in a particular polymeric matrix. It is designed to serve as a valuable source for those monitoring a polymer/plastic material for regulatory or internal compliance. It also helps analysts to correctly identify the complex nature of the materials that have been added to the polymer/plastic. With 50 additional compounds, this second edition nearly doubles the number of additives in several categories, including processing aids, antistatic compounds, mould release products, and blowing agents. It includes a listing that can be cross-referenced by trade name, chemical name, CAS number, and even key mass unit ions from the GC/MS run. Addressing additives from an analytical viewpoint, this comprehensive handbook helps readers identify the additives in plastics. This information can be used to assess compliance with regulations issued by the FDA, US EPA, EU, and other agencies.

This book focuses on the polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasizes the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. With major sections for each additive function, this book provides a highly practical guide for engineers and scientists creating and using polyolefin compounds, who will find in this book a wealth of detail and practical guidance. This unique resource will enable them to make practical decisions about the use of the various additives, fillers, and reinforcements specific to this family of materials. ABOUT THE AUTHOR Michael Tolinski is a freelance writer and a lecturer at the University of Michigan's College of Engineering. He is a frequent contributor to Plastics Engineering and Manufacturing Engineering. Structured to make it easy for the reader to find solutions for specific property requirements Contains a number of short case studies about companies that have used or developed a particular additive to achieve a desired result Covers environmental resistance, mechanical property enhancement, appearance enhancement, processing aids, and other modifications of form and function

Additives for Plastics: Volume 1, State of the Art summarizes the state of the art about additives for plastics, including coupling agents for fillers and plasticizers, as well as colorants, silicas, cellulose fiber, whiskers, and microfibers. Stabilizers for weather, fungal, and heat resistance and resistance to ultraviolet radiation are also considered. This volume is comprised of 13 chapters; the first of which introduces the reader to nonreinforcing fillers such as carbon black, wood flour, alpha cellulose, calcium carbonate, and natural and synthetic silicates. The discussion then turns to synthetic and naturally occurring silicas, short cellulose fibers for reinforcing polymers, and asbestiform fillers. Whiskers and microfibers are the subject of the subsequent chapter, with emphasis on their differences and similarities, application in various plastics, and prospects. Silane and nonsilane coupling agents, nonfiller additives, plasticizers, biocides, and heat stabilizers are also examined. This volume also evaluates rutile titanium dioxide and other white pigments with regard to the opacification and coloring of plastics. This book will be of vital interest to those who are closely associated with the plastics industry as well as those who are concerned with the design, fabrication, and use of plastics.