Alternative Routes To Iron Making 2nd Ed

With a boom in the steel industry all over the world today, the demand of sponge iron has considerably increased as a feed (raw) material to steel making. The increase in the demand of sponge iron is also due to the fact that it is used for replacing coke making required for blast furnace processing. The primary objective of this book is to provide the basis, principles, fundamentals and theory of sponge iron production. This book, earlier titled as Sponge Iron Production in Rotary Kiln, is revised as per the feedback from students, faculty members and professionals. It, now, covers broad spectrum of alternative routes of iron making, therefore, the book is renamed as Alternative Routes to Iron Making. In this revised edition of the book, three new chapters have been added to fulfil the requirement of a textbook for various universities. NEW TO THIS EDITION • New chapters on: o Utilization of Sponge Iron o Environmental Pollution and Control in Sponge Iron Industries o Smelting Reduction Process • Inclusion of principle of fluidisation in fluidised bed processes • Description of Hyl III process with recent development of the process Primarily intended for undergraduate and postgraduate students of metal-lurgical engineering, this book is equally beneficial for researchers, and professionals engaged in DR processes and steel industries.

This book addresses the two major issues faced by the modern steel industry: CO2 emissions and energy consumption. The steel industry accounts for 6.7% of the anthropogenic CO2 emissions and consumes 6% of the total energy consumed in manufacturing. In response to these critical issues, a new technology called flash ironmaking has been developed, aimed at producing iron directly from iron ore concentrate using gaseous reductants/fuels such as natural gas or hydrogen. This ironmaking technology takes advantage of the rapid reaction rate of fine particles and bypasses the palletization process. This book discusses the principles of flash ironmaking, laboratory experiments, and design and operation of a prototype flash reactor. Provides theories and principles of ironmaking and a novel ironmaking technology Includes laboratory experiments to establish the kinetic feasibility of flash ironmaking Covers the design and operation of a prototype flash reactor as well as the design of industrial-size flash ironmaking reactors Describes various cases of flow sheet development, which forms the basis for process analysis and simulation Presents economic analysis case studies Presenting a novel technology that addresses contemporary issues facing one of the largest manufacturing industries, this book is aimed at professionals and researchers in metallurgy, materials engineering, manufacturing engineering, and related disciplines.

This book presents the fundamentals of iron and steel making, including the physical chemistry, thermodynamics and key concepts, while also discussing associated problems and solutions. It guides the reader through the production process from start to finish, covers the raw materials, and addresses the types of processes and reactions involved in both conventional and alternative methods. Though primarily intended as a textbook for students of metallurgical engineering, the book will also prove a useful reference for professionals and researchers working in this area.

This book has been prepared primarily for use by Students studying Ferrous Metallurgy (i.e., Iron and Steelmaking) at UG and PG level of Metallurgical and Materials Engineering, Research workers engaged in obtaining fundamental information in this field, and for Process Metallurgists to understand the processes in general and Sponge Iron Producers in particular. •; It also helps the practicing engineers who wish to apply the theoretical knowledge to the process they are operating. •;The book may very well be introduced as a Textbook for Elective subject in Third/Fourth year of UG programme in Metallurgical & Materials Engineering. •;The book consists of nine chapters in two parts; five chapters in Part-I: Direct Reduction Processes and four chapters in Part-II: Smelting Reduction Processes. In Part-I, the Chapter 1 deals with a brief introduction of the sponge iron and classification of the direct reduction processes with their advantages and limitations. Chapter 2 deals with the raw materials involved in direct reduced ironmaking and their characteristics. In Chapter 3, the physico-chemical principles and thermodynamics of reduction are highlighted. The details of different direct reduction (DR) processes are discussed in Chapter 4. The characteristics and uses of DRI as well as its effect on Electric Arc Furnace performance is discussed in Chapter 5.

The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Engineering Geology is a multidisciplinary subject that interacts with other disciplines, such as mineralogy, petrology, structural geology, hydrogeology, seismic engineering, rock engineering, soil mechanics, geophysics, remote sensing (RS-GIS-GPS) and environmental geology. This book is the only one of its kind in the Indian market that caters to the students of all these subjects. Engineers require a deep understanding, interpretation and analyses of earth sciences before suggesting engineering designs and remedial measures to combat natural disasters, such as earthquakes, volcanoes, landslides, debris flows, tsunamis and floods. This book covers all aspects of engineering geology and is intended to serve as a reference for practicing civil engineers, geotechnical engineers, marine engineers, geologists and mining engineers. Engineering Geology has also been designed as a textbook for students pursuing undergraduate and postgraduate courses in advanced/applied geology and earth sciences. A plethora of examples and case studies relevant to the Indian context have been included for better understanding of the geological challenges faced by engineers.New in this Edition• The concept of watershed and the depiction of watershed atlas of India• Latest findings by the Indian Bureau of Mines• Recent developments in coastal engineering and innovative structures• New types of protective structures to guard against tsunamis• Role of geology in building smart cities• Environmental legislation in India

In dynamic investment planning the time of investment is a significant issue. By simplifying the mathematical notation, the author of this book seeks to make control theory a practical tool that can be applied to the problem of timing. The book, first published in 1977, begins with an introduction to one important approach to control theory – dynamic programming. Then some of the relevant literature that deals with investment decision-making is reviewed. This is followed by a mathematically formulated planning model. The computational aspects of the model are discussed and a complete computer flow chart is given. The second part of the book gives a thorough application of the theory by means of a detailed case study – the planning of a steel industry. The case study illustrates how a fairly abstract dynamic analysis can be effectively integrated with practical decision-making concerns. This book is ideal for students of economics and business.