Ballast Railroad Design Smart Uow Approach

The rail network plays an essential role in transport infrastructure worldwide. A ballasted track is commonly used for several reasons, including economic considerations, load bearing capacity, rapid drainage and ease of maintenance. Given the ever-increasing demand for trains to carry heavier axle loads at greater speeds, traditional design and construction must undergo inevitable changes for sustainable performance. Ballast is an unbounded granular assembly that displaces when subjected to repeated train loading affecting track stability. During heavy haul operations, ballast progressively deteriorates and the infiltration of fluidized fines (mud pumping) from the underlying substructure and subgrade decreases its shear strength and also impedes drainage, while increasing track deformation and associated maintenance. Features: serves as a useful guide to assist the practitioner in new track design as well as remediating existing tracks. research discussed in this book has made considerable impact on the railway industry. resulting from collaborative research between academia and industry, incorporating sophisticated laboratory tests, computational modelling and field studies. This book presents a comprehensive procedure for the design of ballasted tracks based on a rational approach that combines extensive laboratory testing, computational modelling and field measurements conducted over the past two decades. Ballast Railroad Design: SMART-UOW Approach will not only become an imperative design aid for rail practitioners, but will also be a valuable resource for postgraduate students and researchers alike in railway engineering.

Railways are frequently promoted as one of the most sustainable modes of transport. However, their impact will in practice be significantly affected by the ways in which they are designed, constructed, and used. This book provides a comprehensive overview of the issues involved in planning, engineering and operating sustainable railway systems.

Ballast plays a vital role in transmitting and distributing the train wheel loads to the underlying track substructure. The load-bearing capacity, safe train speed, and the levels of noise and vibration, as well as passenger comfort depend on the behaviour of ballast through particle interlocking and the corresponding deformation of this granular assembly. Attrition and breakage of ballast occur progressively under heavy and continual cyclic loading, causing track deterioration and rail misalignment affecting safety, while exacerbating the intensity of track maintenance. In the absence of realistic computational models, the track substructure is traditionally designed using mostly empirical approaches. In this book, the authors present the detailed information on the strength, deformation, and degradation aspects of fresh and recycled ballast under monotonic, cyclic, and impact loading using innovative geotechnical testing devices. A constitutive model for ballast incorporating particle breakage is presented representing a more realistic stress–strain response. The mathematical formulations and numerical models are validated using controlled experimental simulations and fully instrumented field trials. Revised ballast gradation is described to provide greater track resiliency and extended longevity. The book also provides a detailed description of geosynthetics for substructure improvement considering track deterioration caused by particle degradation, fouling, and impeded drainage. New to this second edition are extensive discussions on subgrade soil stabilisation, causes and mechanisms of soil fluidisation (mud pumping) under cyclic loading, and preventive and remedial measures to alleviate undue instability of ballast tracks. This book should prove most beneficial for final-year civil engineering students and for postgraduate teaching and learning. It is an ideal supplement for practising railway engineers and researchers engaged in the challenging tasks of future track design for heavier and faster trains.

This book includes a collection of researches that contains research data, discussions and conclusions focusing on several related geotechnical aspects of infrastructure. Topics include issues related to civil infrastructure such as temperature-induced lateral earth pressure on bridge abutment, subsidence of high speed rail and expressway, application of recycled rubber mats, railway ballast evaluation, hurricane protection floodwall, tunnel portal stability, deep excavation case study and properties of contaminated soils. Various types of research were used in the various studies, including field measurements, numerical analyses and laboratory measurements. This findings and results should lead to more resilient infrastructure design, maintenance and management, which will provide benefits to both civil engineering practitioners, researchers and students

Economic growth, security and sustainability across Europe are at risk due to ageing railway infrastructure systems. At present, the majority of such systems are aging and some have even reached their initial design lives. These issues align with a major challenge in civil engineering: how to restore and improve urban infrastructure and built environments. Policy, environmental and physical barriers must be addressed and overcome. The complex and interconnected nature of the problem means that there is a need for academia, industry, communities and governments to work collaboratively. The challenges posed by extreme events from natural and man-made disasters are urgent. Rail Infrastructure Resilience: A Best-Practices Handbook presents developed improvement methods for rail infrastructure systems, toward resilience to extreme conditions. It shows how best to use new information in the engineering design, maintenance, construction and renewal of rail infrastructure resilience, through knowledge exchange and capability development. The book presents the outcome of a major European research project, known as the RISEN project. RISEN aimed to enhance knowledge creation and transfer using both international and intersectoral secondment mechanisms among European Advanced Rail Research Universities and SMEs, and Non-EU, leading rail universities, providing methodological approaches and practical tools for restoring and improving railway infrastructure systems for extreme events. Edited and written by members of this project, this book will be essential reading for researchers and practitioners hoping to find practical solutions to the challenges of rail infrastructure resilience. Offers a best-practices handbook for rail infrastructure resilience from the leaders in the field Paints a holistic picture of the rail transport system, showing that infrastructure maintenance intervention can be enhanced through advanced monitoring systems and resilience design Presents rail infrastructure resilience and advanced condition monitoring, allowing a better understanding of the critical maintenance, renewal and retrofit needs of railways Considers how academia, industry, communities and governments can work collaboratively in order to tackle aggregated problems in rail infrastructure resilience Presents the findings from the RISEN project, the leading European project on enhancing knowledge creation and transfer of expertise on rail infrastructure resilience

This book covers problems and their solution of a wide range of geotechnical topics. Every chapter starts with a summary of key concepts and theory, followed by worked-out examples, and ends with a short list of key references. It presents a unique collection of step by step solutions from basic to more complex problems in various topics of geotechnical engineering, including fundamental topics such as effective stress, permeability, elastic deformation, shear strength and critical state together with more applied topics such retaining structures and dams, excavation and tunnels, pavement infrastructure, unsaturated soil mechanics, marine works, ground monitoring. This book aims to provide students (undergraduates and postgraduates) and practitioners alike a reference guide on how to solve typical geotechnical problems. Features: Guide for solving typical geotechnical problems complementing geotechnical textbooks. Reference guide for practitioners to assist in determining solutions to complex geotechnical problems via simple methods.

This book contains accepted papers submitted and peer-reviewed for the 25th Annual Symposium organised by the Sydney Chapter of the Australian Geomechanics Society (AGS). The objective is to bring together the key stakeholders of the Australian geological and geotechnical community. It showcases state-of-the-art practices, new research findings, and case histories that demonstrate geotechnical advances and challenges in building and transport infrastructure. It focuses on geotechnical aspects of smart solutions and improvements in geotechnical approaches for transport infrastructure projects, advances in tunnel design and construction, and geotechnical challenges in design and construction – case histories and lessons learnt. This volume will be a useful guide to those in academia and industry working in the fields of geotechnical engineering.

This volume presents selected papers presented during the 4th International Conference on Transportation Geotechnics. The papers address the geotechnical challenges in design, construction, maintenance, monitoring, and upgrading of roads, railways, airfields, and harbor facilities and other ground transportation infrastructure with the goal of providing safe, economic, environmental, reliable and sustainable infrastructures. This volume will be of interest to postgraduate students, academics, researchers, and consultants working in the field of civil and transport infrastructure.