Circuits And Systems For Wireless Communications

Part I: RF System Integration. 1. RF System Integration; C. Toumazou. 2. RF System Board Level Integration for Mobile Phones; G.J. Aspin. 3. Integration of RF Systems on a Chip; P.J. Mole. 4. Towards the Full Integration of Wireless Front-End Circuits; M. Steyaert. 5. GSM Transceiver Front-End Circuits in 0.25 mum CMOS; Q. Huang, et al. Part II: RF Front-End Circuits. 6. RF Front-End Circuits; Q. Huang. 7. Phase-Noise-to-Carrier Ratio in LC Oscillators; Q. Huang. 8. Design Study of a 900 MHz/1.8 GHz CMOS Transceiver for Dual-Band Applications; B. Razavi. 9. Integrated Wireless Transc.

This book examines integrated circuits, systems and transceivers for wireless and mobile communications. It covers the most recent developments in key RF, IF, analogue, mixed-signal components and single-chip transceivers in CMOS technology.

Over the past decade the tremendous development of Wireless Communications has changed human life incredibly. Considerable advancement has been made in the design and architecture of communications related RF and Microwave circuits. This book is focused on special circuits dedicated to the RF level of wireless Communications. From Oscillators to Modulation and Demodulation and from Mixers to RF and Power Amplifier Circuits, the topics are presented in a sequential manner. A wealth of analysis is provided in the text alongside various worked out examples. Related problem sets are given at the end of each chapter.

The idea for this book originated from a Special Session on Circuits and Systems for Future Generations of Wireless Communications that was presented at the 2005 InternationalSymposiumon Circuits and Systems, which was then followed by two Special Issues bearing the same title that appeared in the March and April 2008 issues of the IEEE Transactions on Circuits and Systems – Part II: Express Briefs. Out of a large number of great contributions, we have selected those tting best the book format based on their quality. We would like to thank all the authors, the reviewers of the Transactions on Circuits and Systems – Part II, and the reviewers of the nal book material for their efforts in creating this manuscript. We also thank the Springer Editorial Staff for their support in putting together all the good work. We hope that this book will provide you, the reader, with new insights into Circuits and Systems for Future Generations of Wireless Communications.

The idea for this book originated from a Special Session on Circuits and Systems for Future Generations of Wireless Communications that was presented at the 2005 InternationalSymposiumon Circuits and Systems, which was then followed by two Special Issues bearing the same title that appeared in the March and April 2008 issues of the IEEE Transactions on Circuits and Systems – Part II: Express Briefs. Out of a large number of great contributions, we have selected those tting best the book format based on their quality. We would like to thank all the authors, the reviewers of the Transactions on Circuits and Systems – Part II, and the reviewers of the nal book material for their efforts in creating this manuscript. We also thank the Springer Editorial Staff for their support in putting together all the good work. We hope that this book will provide you, the reader, with new insights into Circuits and Systems for Future Generations of Wireless Communications.

The increasing demand for extremely high-data-rate communications has urged researchers to develop new communication systems. Currently, wireless transmission with more than one Giga-bits-per-second (Gbps) data rates is becoming essential due to increased connectivity between different portable and smart devices. To realize Gbps data rates, millimeter-wave (MMW) bands around 60 GHz is attractive due to the availability of large bandwidth of 9 GHz. Recent research work in the Gbps data rates around 60 GHz band has focused on short-range indoor applications, such as uncompressed video transfer, high-speed file transfer between electronic devices, and communication to and from kiosk. Many of these applications are limited to 10 m or less, because of the huge free space path loss and oxygen absorption for 60 GHz band MMW signal. This book introduces new knowledge and novel circuit techniques to design low-power MMW circuits and systems. It also focuses on unlocking the potential applications of the 60 GHz band for high-speed outdoor applications. The innovative design application significantly improves and enables high-data-rate low-cost communication links between two access points seamlessly. The 60 GHz transceiver system-on-chip provides an alternative solution to upgrade existing networks without introducing any building renovation or external network laying works.

MEMS-based Circuits and Systems for Wireless Communications provides comprehensive coverage of RF-MEMS technology from device to system level. This edited volume places emphasis on how system performance for radio frequency applications can be leveraged by Micro-Electro-Mechanical Systems (MEMS). Coverage also extends to innovative MEMS-aware radio architectures that push the potential of MEMS technology further ahead. This work presents a broad overview of the technology from MEMS devices (mainly BAW and Si MEMS resonators) to basic circuits, such as oscillators and filters, and finally complete systems such as ultra-low-power MEMS-based radios. Contributions from leading experts around the world are organized in three parts. Part I introduces RF-MEMS technology, devices and modeling and includes a prospective outlook on ongoing developments towards Nano-Electro-Mechanical Systems (NEMS) and phononic crystals. Device properties and models are presented in a circuit oriented perspective. Part II focusses on design of electronic circuits incorporating MEMS. Circuit design techniques specific to MEMS resonators are applied to oscillators and active filters. In Part III contributors discuss how MEMS can advantageously be used in radios to increase their miniaturization and reduce their power consumption. RF systems built around MEMS components such as MEMS-based frequency synthesis including all-digital PLLs, ultra-low power MEMS-based communication systems and a MEMS-based automotive wireless sensor node are described.

This is the first comprehensive book to address the design of RF MEMS-based circuits for use in high performance wireless systems. A groundbreaking research and reference tool, the book enables you to understand the realm of applications of RF MEMS technology; become knowledgeable of the wide variety and performance levels of RF MEMS devices; and partition the architecture of wireless systems to achieve greater levels of performance. This innovative resource also guides you through the design process of RF MEMS-based circuits, and establishes a practical knowledge base for the design of high-yield RF MEMS-based circuits. The book features exercises and detailed case studies on working RF MEMS circuits that help you decide what approaches best fit your design constraints. This unified treatment of RF MEMS-based circuit technology opens up a new world of solutions for meeting the unique challenges of low power/portable wireless products.