Circuits And Systems For Future Generations Of Wireless Communications

The idea for this book originated from a Special Session on Circuits and Systems for Future Generations of Wireless Communications that was presented at the 2005 InternationalSymposiumon Circuits and Systems, which was then followed by two Special Issues bearing the same title that appeared in the March and April 2008 issues of the IEEE Transactions on Circuits and Systems – Part II: Express Briefs. Out of a large number of great contributions, we have selected those tting best the book format based on their quality. We would like to thank all the authors, the reviewers of the Transactions on Circuits and Systems – Part II, and the reviewers of the nal book material for their efforts in creating this manuscript. We also thank the Springer Editorial Staff for their support in putting together all the good work. We hope that this book will provide you, the reader, with new insights into Circuits and Systems for Future Generations of Wireless Communications.

This book contains revised contributions by the speakers of the 1st IEEE Workshop on Wireless Communication Circuits and Systems, held in Lucerne, Switzerland, from June 22-24, 1998. The aim of the workshop was to demonstrate the vast expertise of the CAS Society in the area of circuit and system design to the rapidly growing field of wireless communications. The workshop combined presentations by invited experts from academia and industry with panel and informal discussions. The following topics were covered: RF System Integration (single-chip systems, CMOS RF circuits), RF Front-End Circuits (CMOS RF oscillators, broadband design techniques), Wideband Conversion for Software Radio (A/D conversion issues, wideband sub-sampling, low-spurious A/D conversion), Process Technologies for Future RF Systems (Si, SiGe, GaAs, CMOS, packaging technologies), DSP for Wireless Communications (DSP algorithms, fixed-point systems, DSP for baseband applications), Blind Channel Equalization (adaptive interference suppression, design techniques, channel estimation). A carefully selected combination of tutorial-like papers as well as papers on specialized and advanced topics is included. Thus, newcomers to the field of wireless communications will benefit from the overview of emerging technologies in circuits and systems, and specialists will benefit from the thought-provoking details presented in this book.

This book addresses in-depth technical issues, limitations, considerations and challenges facing millimeter-wave (MMW) integrated circuit and system designers in designing MMW wireless communication systems from the complementary metal-oxide semiconductor (CMOS) perspective. It offers both a comprehensive explanation of fundamental theories and a broad coverage of MMW integrated circuits and systems.CMOS Millimeter-Wave Integrated Circuits for Next Generation Wireless Communication Systems is an excellent reference for faculty, researchers and students working in electrical and electronic engineering, wireless communication, integrated circuit design and circuits and systems. While primarily written for upper-level undergraduate courses, it is also an excellent introduction to the subject for instructors, graduate students, researchers, integrated circuit designers and practicing engineers. Advanced readers could also benefit from this book as it includes many recent state-of-the-art MMW circuits.

This book examines integrated circuits, systems and transceivers for wireless and mobile communications. It covers the most recent developments in key RF, IF, analogue, mixed-signal components and single-chip transceivers in CMOS technology.

The increasing demand for extremely high-data-rate communications has urged researchers to develop new communication systems. Currently, wireless transmission with more than one Giga-bits-per-second (Gbps) data rates is becoming essential due to increased connectivity between different portable and smart devices. To realize Gbps data rates, millimeter-wave (MMW) bands around 60 GHz is attractive due to the availability of large bandwidth of 9 GHz. Recent research work in the Gbps data rates around 60 GHz band has focused on short-range indoor applications, such as uncompressed video transfer, high-speed file transfer between electronic devices, and communication to and from kiosk. Many of these applications are limited to 10 m or less, because of the huge free space path loss and oxygen absorption for 60 GHz band MMW signal. This book introduces new knowledge and novel circuit techniques to design low-power MMW circuits and systems. It also focuses on unlocking the potential applications of the 60 GHz band for high-speed outdoor applications. The innovative design application significantly improves and enables high-data-rate low-cost communication links between two access points seamlessly. The 60 GHz transceiver system-on-chip provides an alternative solution to upgrade existing networks without introducing any building renovation or external network laying works.

Over the past decade, tremendous development of Wireless Communications has changed human life and engineering. Considerable advancement has been made in design and architecture of related RF and microwave circuits. Introduction to Wireless Communication Circuits focusses on special circuits dedicated to the RF level of wireless communications. From oscillators to modulation and demodulation, and from mixers to RF and power amplifier circuits, all are presented in a sequential manner. A wealth of analytical relations is provided in the text alongside various worked out examples. Related problem sets are given at the end of each chapter. Basic concepts of RF Analog Circuit Design are developed in the book.

"This book highlights the current design issues in wireless networks, informing scholars and practitioners about advanced prototyping innovations in this field"--

Advanced concepts for wireless technologies present a vision of technology that is embedded in our surroundings and practically invisible. From established radio techniques like GSM, 802.11 or Bluetooth to more emerging technologies, such as Ultra Wide Band and smart dust motes, a common denominator for future progress is the underlying integrated circuit technology. Wireless Technologies responds to the explosive growth of standard cellular radios and radically different wireless applications by presenting new architectural and circuit solutions engineers can use to solve modern design problems. This reference addresses state-of-the art CMOS design in the context of emerging wireless applications, including 3G/4G cellular telephony, wireless sensor networks, and wireless medical application. Written by top international experts specializing in both the IC industry and academia, this carefully edited work uncovers new design opportunities in body area networks, medical implants, satellite communications, automobile radar detection, and wearable electronics. The book is divided into three sections: wireless system perspectives, chip architecture and implementation issues, and devices and technologies used to fabricate wireless integrated circuits. Contributors address key issues in the development of future silicon-based systems, such as scale of integration, ultra-low power dissipation, and the integration of heterogeneous circuit design style and processes onto one substrate. Wireless sensor network systems are now being applied in critical applications in commerce, healthcare, and security. This reference, which contains 25 practical and scientifically rigorous articles, provides the knowledge communications engineers need to design innovative methodologies at the circuit and system level.