Combustion In Advanced Gas Turbine Systems

Cranfield International Symposium Series, Volume 10: Combustion in Advanced Gas Turbine Systems covers the proceedings of an International Propulsion Symposium, held at the College of Aeronautics in Cranfield in April 1967. The book focuses on the processes, methodologies, reactions, and transformations involved in chemical combustion. The selection first takes a look at the design considerations in advanced gas turbine combustion chambers, combustion in industrial gas turbines, and combustion development on the Rolls-Royce Spey engine. Discussions focus on mechanical condition, carbon-formation and exhaust smoke, system requirements, fuel oil ash deposition and corrosion, combustion-system design, performance requirements, types of primary zone, fuel injection, and combustion chamber types. The text then examines subsonic flow flameholder studies using a low pressure simulation technique; stabilization of hydrogen diffusion flames by flame-holders in supersonic flow at low stagnation temperatures; and augmentation systems for turbofan engines. The book takes a look at a consideration of the possible use of refractory ceramic materials for advanced combustion chamber design; cooling of flame tubes by steam injection; and combustion problems in the massive steam injection gas turbine. The selection is a valuable source of information for researchers interested in the process of combustion in advanced gas turbine systems.

With regard to both the environmental sustainability and operating efficiency demands, modern combustion research has to face two main objectives, the optimization of combustion efficiency and the reduction of pollutants. This book reports on the combustion research activities carried out within the Collaborative Research Center (SFB) 568 “Flow and Combustion in Future Gas Turbine Combustion Chambers” funded by the German Research Foundation (DFG). This aimed at designing a completely integrated modeling and numerical simulation of the occurring very complex, coupled and interacting physico-chemical processes, such as turbulent heat and mass transport, single or multi-phase flows phenomena, chemical reactions/combustion and radiation, able to support the development of advanced gas turbine chamber concepts

Primarily this book describes the thermodynamics of gas turbine cycles. The search for high gas turbine efficiency has produced many variations on the simple "open circuit" plant, involving the use of heat exchangers, reheating and intercooling, water and steam injection, cogeneration and combined cycle plants. These are described fully in the text. A review of recent proposals for a number of novel gas turbine cycles is also included. In the past few years work has been directed towards developing gas turbines which produce less carbon dioxide, or plants from which the CO2 can be disposed of; the implications of a carbon tax on electricity pricing are considered. In presenting this wide survey of gas turbine cycles for power generation the author calls on both his academic experience (at Cambridge and Liverpool Universities, the Gas Turbine Laboratory at MIT and Penn State University) and his industrial work (primarily with Rolls Royce, plc.) The book will be essential reading for final year and masters students in mechanical engineering, and for practising engineers.

Combustion and Heat Transfer in Gas Turbine Systems is a compilation of papers from the Proceedings of an International Propulsion Symposium held at the College of Aeronautics, Cranfield in April 1969. This compilation deals with research done by academic and scientific institutions and of industrial organizations, with some research papers covering atomization, fuels, and high-temperature materials. One paper describes the combustion system of the Concorde engine used in commercial flights, temperature of metal parts, and some design modifications to increase the mechanical life of the combustion system. Another paper discusses the evolution of the RB 162 combustion system that is used in the vertical takeoff and landing aircrafts. The RB 162 has many design features of the earlier single reversal chamber and differs in only one or two points. The book then notes the necessity of a plenum chamber burning to further development of supersonic engines and flight. One paper also proposes an alternative theory to the traditional ignition theory of altitude relighting such as those developed by Lewis and von Elbe. Another paper reposts on some observations made of the atomizing characteristics of air-blast atomizers and proposes simple changes to improve the performance of the atomizer by prefilming and allowing air to both sides of the fuel. This compilation will prove very helpful for aeronautical engineers, aviation designers, physicists, students of engineering, and readers who are interested in the design and development of jet engines and supersonic aircrafts.

In spite of the increasing presence of renewable energy sources, fossil fuels will remain the primary supply of the world's energy needs for the upcoming future. Modern gas-turbine based systems represent one of the most efficient large-scale power generation technology currently available. Alongside this, gas-turbine power plants operate with very low emissions, have flexible operational characteristics and are able to utilize a broad range of fuels. It is expected that gas-turbine based plants will play an important role as an effective means of converting combustion energy in the future as well, because of the vast potential energy savings. The numerical approach to the design of complex systems such as gas-turbines has gained a continuous growth of interest in the last few decades. This because simulations are foreseen to provide a tremendous increase in the combustor efficiency, fuel-flexibility and quality over the next future. In this dissertation, an advanced turbulent combustion technique is implemented and progressively developed for the simulation of all the features that are typically observed in stationary gas-turbine combustion, including hydrogen as a fuel. The developed turbulent combustion model retains most of the accuracy of a detailed simulation while drastically reducing its computational time. As a result of this work, the advancement of power generation plants can be accelerated, paving the way for future developments of alternative fuel usage in a cleaner and more efficient combustion.

The development of clean, sustainable energy systems is a preeminent issue in our time. Gas turbines will continue to be important combustion-based energy conversion devices for many decades to come, used for aircraft propulsion, ground-based power generation, and mechanical-drive applications. This book compiles the key scientific and technological knowledge associated with gas turbine emissions into a single authoritative source.

Modern gas turbine power plants represent one of the most efficient and economic conventional power generation technologies suitable for large-scale and smaller scale applications. Alongside this, gas turbine systems operate with low emissions and are more flexible in their operational characteristics than other large-scale generation units such as steam cycle plants. Gas turbines are unrivalled in their superior power density (power-to-weight) and are thus the prime choice for industrial applications where size and weight matter the most. Developments in the field look to improve on this performance, aiming at higher efficiency generation, lower emission systems and more fuel-flexible operation to utilise lower-grade gases, liquid fuels, and gasified solid fuels/biomass. Modern gas turbine systems provides a comprehensive review of gas turbine science and engineering. The first part of the book provides an overview of gas turbine types, applications and cycles. Part two moves on to explore major components of modern gas turbine systems including compressors, combustors and turbogenerators. Finally, the operation and maintenance of modern gas turbine systems is discussed in part three. The section includes chapters on performance issues and modelling, the maintenance and repair of components and fuel flexibility. Modern gas turbine systems is a technical resource for power plant operators, industrial engineers working with gas turbine power plants and researchers, scientists and students interested in the field. Provides a comprehensive review of gas turbine systems and fundamentals of a cycle Examines the major components of modern systems, including compressors, combustors and turbines Discusses the operation and maintenance of component parts

Gas turbine engines will still represent a key technology in the next 20-year energy scenarios, either in stand-alone applications or in combination with other power generation equipment. This book intends in fact to provide an updated picture as well as a perspective vision of some of the major improvements that characterize the gas turbine technology in different applications, from marine and aircraft propulsion to industrial and stationary power generation. Therefore, the target audience for it involves design, analyst, materials and maintenance engineers. Also manufacturers, researchers and scientists will benefit from the timely and accurate information provided in this volume. The book is organized into five main sections including 21 chapters overall: (I) Aero and Marine Gas Turbines, (II) Gas Turbine Systems, (III) Heat Transfer, (IV) Combustion and (V) Materials and Fabrication.