Conduction Heat Transfer Analysis In Composite Materials

With anticipated increased use of composite materials in aerospace structures and other applications, thermal properties of composites are needed as essential design information. In the past there was only scanty amount of research effort in thermal analysis of composites, as most of the work has been concerned with their mechanical properties. This report contains results from a rigorous analysis to determine steady-state effective thermal conductivities of fiber-matrix type of composites. The fibers bundled into twos are considered dispersed in a matrix of resin. The dispersion patterns of configurations considered are: (1) uni-directional fibers in a matrix, as the simplest geometry, and (2) 0.90 configuration in which two uni-directional tapes are overlaid at 90 degrees to each other. The method of analysis is to solve a two-region steady-state heat conduction equation either analytically or numerically. The analysis assumes a prior knowledge of the geometry of a composite and the constituents thermal conductivities.

This book provides a profound understanding, which physical processes and mechanisms cause the heat transfer in composite and cellular materials. It shows models for all important classes of composite materials and introduces into the latest advances. In three parts, the book covers Composite Materials (Part A), Porous and Cellular Materials (Part B) and the appearance of a conjoint solid phase and fluid aggregate (Part C).

This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.

For uni-directional fibrous composites and laminated composites, a heat-balance integral method has been developed for the analysis of transient heat flow along the fibers or in the plane of laminates. The method is based on the construction of, for the two constituent media, temperature profiles which not only satisfy the necessary boundary conditions but also fulfill the asymptotic error function properties when inter-region conduction is vanishingly small or at very early times of the heat transient.

¿ New methods for determining temperature distributions in heterogeneous media, including composite materials¿ Offers unique tools to predict temperatures in steady-state and transient-state conditions¿ Connects analytical solutions for temperature distribution with thermal stress analysis

The convection and conduction heat transfer, thermal conductivity, and phase transformations are significant issues in a design of wide range of industrial processes and devices. This book includes 18 advanced and revised contributions, and it covers mainly (1) heat convection, (2) heat conduction, and (3) heat transfer analysis. The first section introduces mixed convection studies on inclined channels, double diffusive coupling, and on lid driven trapezoidal cavity, forced natural convection through a roof, convection on non-isothermal jet oscillations, unsteady pulsed flow, and hydromagnetic flow with thermal radiation. The second section covers heat conduction in capillary porous bodies and in structures made of functionally graded materials, integral transforms for heat conduction problems, non-linear radiative-conductive heat transfer, thermal conductivity of gas diffusion layers and multi-component natural systems, thermal behavior of the ink, primer and paint, heating in biothermal systems, and RBF finite difference approach in heat conduction. The third section includes heat transfer analysis of reinforced concrete beam, modeling of heat transfer and phase transformations, boundary conditions-surface heat flux and temperature, simulation of phase change materials, and finite element methods of factorial design. The advanced idea and information described here will be fruitful for the readers to find a sustainable solution in an industrialized society.

This book contains keynote lectures and 54 technical papers, presented at the 23rd International Thermal Conductivity Conference, on various topics, including techniques, coatings and films, theory, composites, fluids, metals, ceramics, and organics, related to thermal conductivity.

The convection and conduction heat transfer, thermal conductivity, and phase transformations are significant issues in a design of wide range of industrial processes and devices. This book includes 18 advanced and revised contributions, and it covers mainly (1) heat convection, (2) heat conduction, and (3) heat transfer analysis. The first section introduces mixed convection studies on inclined channels, double diffusive coupling, and on lid driven trapezoidal cavity, forced natural convection through a roof, convection on non-isothermal jet oscillations, unsteady pulsed flow, and hydromagnetic flow with thermal radiation. The second section covers heat conduction in capillary porous bodies and in structures made of functionally graded materials, integral transforms for heat conduction problems, non-linear radiative-conductive heat transfer, thermal conductivity of gas diffusion layers and multi-component natural systems, thermal behavior of the ink, primer and paint, heating in biothermal systems, and RBF finite difference approach in heat conduction. The third section includes heat transfer analysis of reinforced concrete beam, modeling of heat transfer and phase transformations, boundary conditions-surface heat flux and temperature, simulation of phase change materials, and finite element methods of factorial design. The advanced idea and information described here will be fruitful for the readers to find a sustainable solution in an industrialized society.