Design And Development Of Model Predictive Primary Control Of Micro Grids

This book provides a design and development perspective MPC for micro-grid control, emphasizing step-by-step conversion of a nonlinear MPC to linear MPC preserving critical aspects of nonlinear MPC. The book discusses centralized and decentralized MPC control algorithms for a generic modern-day micro-grid consisting of vital essential constituents. It starts with the nonlinear MPC formulation for micro-grids. It also moves towards the linear time-invariant and linear time-variant approximations of the MPC for micro-grid control. The contents also discuss how the application of orthonormal special functions can improve computational complexity of MPC algorithms. It also highlights various auxiliary requirements like state estimator, disturbance compensator for robustness, selective harmonic eliminator for eliminating harmonics in the micro-grid, etc. These additional requirements are crucial for the successful online implementation of the MPC. In the end, the book shows how a well-designed MPC is superior in performance compared to the conventional micro-grid primary controllers discussed above. The key topics discussed in this book include – the detailed modeling of micro-grid components; operational modes in micro-grid and their control objectives; conventional micro-grid primary controllers; the importance of MPC as a micro-grid primary controller; understanding of MPC operation; nonlinear MPC formulation; linear approximations of MPC; application of special functions in the MPC formulation; and other online requirements for the MPC implementation. The examples in the book are available both from a calculation point of view and as MATLAB codes. This helps the students get acquainted with the subject first and then allows them to implement the subject they learn in software for further understanding and research.

The book shows how the operation of renewable-energy microgrids can be facilitated by the use of model predictive control (MPC). It gives readers a wide overview of control methods for microgrid operation at all levels, ranging from quality of service, to integration in the electricity market. MPC-based solutions are provided for the main control issues related to energy management and optimal operation of microgrids.The authors present MPC techniques for case studies that include different renewable sources - mainly photovoltaic and wind - as well as hybrid storage using batteries, hydrogen and supercapacitors. Experimental results for a pilot-scale microgrid are also presented, as well as simulations of scheduling in the electricity market and integration of electric and hybrid vehicles into the microgrid. The authors also provide a modular simulator to be run in MATLAB®/Simulink®, for readers to create their own microgrids using the blocks supplied, in order to replicate the examples provided in the book and to develop and validate control algorithms on existing or projected microgrids. Model Predictive Control of Microgrids will interest researchers and practitioners, enabling them to keep abreast of a rapidly developing field. The text will also help to guide graduate students through processes from the conception and initial design of a microgrid through its implementation to the optimization of microgrid management.

The book shows how the operation of renewable-energy microgrids can be facilitated by the use of model predictive control (MPC). It gives readers a wide overview of control methods for microgrid operation at all levels, ranging from quality of service, to integration in the electricity market. MPC-based solutions are provided for the main control issues related to energy management and optimal operation of microgrids. The authors present MPC techniques for case studies that include different renewable sources – mainly photovoltaic and wind – as well as hybrid storage using batteries, hydrogen and supercapacitors. Experimental results for a pilot-scale microgrid are also presented, as well as simulations of scheduling in the electricity market and integration of electric and hybrid vehicles into the microgrid. in order to replicate the examples provided in the book and to develop and validate control algorithms on existing or projected microgrids. Model Predictive Control of Microgrids will interest researchers and practitioners, enabling them to keep abreast of a rapidly developing field. The text will also help to guide graduate students through processes from the conception and initial design of a microgrid through its implementation to the optimization of microgrid management. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Model predictive control (MPC) is a method for controlling a process while satisfying a set of constraints. The use of MPC for controlling power systems has been gaining traction in recent years. This work presents the use of MPC for distributed renewable power generation in microgrids.

Microgrids: Advanced Control Methods and Renewable Energy System Integration demonstrates the state-of-art of methods and applications of microgrid control, with eleven concise and comprehensive chapters. The first three chapters provide an overview of the control methods of microgrid systems that is followed by a review of distributed control and management strategies for the next generation microgrids. Next, the book identifies future research directions and discusses the hierarchical power sharing control in DC Microgrids. Chapter 4 investigates the demand side management in microgrid control systems from various perspectives, followed by an outline of the operation and controls of the smart microgrids in Chapter 5. Chapter 6 deals with control of low-voltage microgrids with master/slave architecture. The final chapters explain the load-Frequency Controllers for Distributed Power System Generation Units and the issue of robust control design for VSIs, followed by a communication solution denoted as power talk. Finally, in Chapter 11, real-time implementation of distributed control for an autonomous microgrid system is performed. Addresses issues of contemporary interest to practitioners in the power engineering and management fields Focuses on the role of microgrids within the overall power system structure and attempts to clarify the main findings relating to primary and secondary control and management at the microgrid level Provides results from a quantified assessment of benefits from economic, environmental, operational, and social point-of-views Presents the hierarchical control levels manifested in microgrid operations and evaluates the principles and main functions of centralized and decentralized control

Microgrids Presents microgrid methodologies in modeling, stability, and control, supported by real-time simulations and experimental studies Microgrids: Dynamic Modeling, Stability and Control, provides comprehensive coverage of microgrid modeling, stability, and control, alongside new relevant perspectives and research outcomes, with vital information on several microgrid modeling methods, stability analysis methodologies and control synthesis approaches that are supported by real-time simulations and experimental studies for active learning in professionals and students alike. This book is divided into two parts: individual microgrids and interconnected microgrids. Both parts provide individual chapters on modeling, stability, and control, providing comprehensive information on the background, concepts, and architecture, supported by several examples and corresponding source codes/simulation files. Communication based control and cyber security of microgrids are addressed and new outcomes and advances in interconnected microgrids are discussed. Summarizing the outcome of more than 15 years of the authors’ teaching, research, and projects, Microgrids: Dynamic Modeling, Stability and Control covers specific sample topics such as: Microgrid dynamic modeling, covering microgrid components modeling, DC and AC microgrids modeling examples, reduced-order models, and model validation Microgrid stability analysis, covering stability analysis methods, islanded/grid connected/interconnected microgrid stability Microgrids control, covering hierarchical control structure, communication-based control, cyber-resilient control, advanced control theory applications, virtual inertia control and data-driven control Modeling, analysis of stability challenges, and emergency control of large-scale interconnected microgrids Synchronization stability of interconnected microgrids, covering control requirements of synchronous microgrids and inrush power analysis With comprehensive, complete, and accessible coverage of the subject, Microgrids: Dynamic Modeling, Stability and Control is the ideal reference for professionals (engineers, developers) and students working with power/smart grids, renewable energy, and power systems, to enable a more effective use of their microgrids or interconnected microgrids.

Modelling and Control Dynamics in Microgrid Systems with Renewable Energy Resources looks at complete microgrid systems integrated with renewable energy resources (RERs) such as solar, wind, biomass or fuel cells that facilitate remote applications and allow access to pollution-free energy. Designed and dedicated to providing a complete package on microgrid systems modelling and control dynamics, this book elaborates several aspects of control systems from classical approach to advanced techniques based on artificial intelligence. It captures the typical modes of operation of microgrid systems with distributed energy storage applications like battery, flywheel, electrical vehicles infrastructures that are integrated within microgrids with desired targets. More importantly, the techno-economics of these microgrid systems are well addressed to accelerate the process of achieving the SDG7 i.e., affordable and clean energy for all (E4ALL). This reference presents the latest developments including step by step modelling processes, data security and standards protocol for commissioning of microgrid projects, making this a useful tool for researchers, engineers and industrialists wanting a comprehensive reference on energy systems models. Includes simulations with case studies and real-world applications of energy system models Detailed systematic modeling with mathematical analysis is covered Features possible operating scenarios with solutions to the encountered issues

Microgrids offers a complete discussion and details about microgrids and their applications, including modeling of AC/DC and hybrid grids in a tied mode with simulation for the solar systems, wind turbines, biomass and fuel cells, and deployment issues. The data communications and control mechanism implementations are analyzed for proper coordination of the AC/DC microgrid. The various real-time applications and future development of the microgrid are also discussed in this book, with MATLAB®-based simulations and results. This book: Discusses the fundamentals of microgrids, the components of microgrids, the modeling of renewable energy sources, and the implementation of microgrids. Explores AC and DC microgrid modeling with real-time examples. Examines the effective extraction of energy from renewable energy sources. Covers analysis of data communications and control-mechanism implementations. Includes HOMER/MATLAB®-based simulations and results on microgrids. This book would be a welcome addition to the libraries of researchers, senior undergraduate students, and graduate students in power and electrical engineering, especially those working with smart and microgrids.