Detector Based Reference Calibrations For Electro Optical Instruments

In most field applications, broadband measurements are used where the spectral product of the source distribution and the meter’s spectral responsivity is measured. This book discusses detector-based radiometric, photometric, color, radiation-temperature, digital imaging-system, and LED measurements. It also shows that, while in photometry, the meter’s standard response covers only the visible, broadband measurements in the UV and IR require different standards. To avoid large errors when using a traditional detector- or source-standard, where the differences in the source distributions and in the meter’s responsivities produce large errors, the signal measurement procedure itself must be standardized. To satisfy the steps of the procedure, selected or properly designed meters should be used. This book is a guide to performing uniform broadband measurements with low uncertainty.

Radiometric Calibration: Theory and Methods contains an engineering development of the theories and methods of radiometric calibration. This book is organized into 18 chapters. Chapters I to V present an introduction to nomenclature, radiation geometry, and blackbody radiation that serves to simplify the discussion of the calibration theory. The rest of the chapters provide the theory of sensor calibration, reviewing numerous examples in which laboratory equipment and specific techniques are described. Algorithms are also covered for digital computer processing as appropriate for each functional aspect of sensor characterization. This publication is intended for engineers and applied physicists concerned with sensor calibration and the interpretation of sensor data.

This book discusses modern, user-friendly radiometric practices that make it possible to convert from traditional source-based optical radiation measurements to the more efficient and higher accuracy detector-based applications and calibrations. It considers improved performance optical detector and radiometer standards including photometers and tristimulus colorimeters, and describes research-based design considerations, measurement of radiometric, optical, and electronic characteristics, and comparison of absolute-, transfer-, and working-standard detectors and radiometers from the ultraviolet (UV) to the infrared (IR) range. The book will serve to guide the optical radiation measurement community, researchers, manufacturers, calibration laboratories, students, and practicing engineers to switch from the old and limited-use measurement methods to the higher performance detector-based applications. The radiometer standards discussed here can be used to produce wide range radiometric, photometric, colour, and radiation temperature measurements with low uncertainty.