Diagnostics And Prognostics Of Aerospace Engines

The propulsion system is arguably the most critical part of the aircraft; it certainly is the single most expensive component of the vehicle. Ensuring that engines operate reliably without major maintenance issues is an important goal for all operators, military or commercial. Engine health management (EHM) is a critical piece of this puzzle and has been a part of the engine maintenance for more than five decades. In fact, systematic condition monitoring was introduced for engines before it was applied to other systems on the aircraft. Diagnostics and Prognostics of Aerospace Engines is a collection of technical papers from the archives of SAE International, which introduces the reader to a brief history of EHM, presents some examples of EHM functions, and outlines important future trends. The goal of engine health maintenance is ultimately to reduce the cost of operations by catching problems before they become major issues, by helping reduce repair times through diagnostics, and by facilitating logistic optimization through prognostic estimates. Diagnostics and Prognostics of Aerospace Engines shows that the essence of these goals has not changed over time.

A collection of technical papers from the archives of SAE International, which introduces the reader to a brief history of EHM, presents some examples of EHM functions, and outlines important future trends.

The propulsion system is arguably the most critical part of the aircraft; it certainly is the single most expensive component of the vehicle. Ensuring that engines operate reliably without major maintenance issues is an important goal for all operators, military or commercial. Engine health management (EHM) is a critical piece of this puzzle and has been a part of the engine maintenance for more than five decades. In fact, systematic condition monitoring was introduced for engines before it was applied to other systems on the aircraft. Diagnostics and Prognostics of Aerospace Engines is a collection of technical papers from the archives of SAE International, which introduces the reader to a brief history of EHM, presents some examples of EHM functions, and outlines important future trends. The goal of engine health maintenance is ultimately to reduce the cost of operations by catching problems before they become major issues, by helping reduce repair times through diagnostics, and by facilitating logistic optimization through prognostic estimates. Diagnostics and Prognostics of Aerospace Engines shows that the essence of these goals has not changed over time.

Condition-Based Maintenance in Aviation: The History, The Business and The Technology describes the history and practice of Condition-Based Maintenance (CBM) systems by showcasing ten technical papers from the archives of SAE International, stretching from the dawn of the jet age down to the present times. By scientifically understanding how different components degrade during operations, it is possible to schedule inspections, repairs, and overhauls at appropriate intervals so that any incipient failure can be detected well in advance. Today, this includes more sensors and analytics so that periodic inspections are replaced by automated "continuous" inspections, and analytical methods that detect imminent failures and predict degradation issues more economically and efficiently. Similar concepts are also being developed for delivering prognostics functions, such as tracking of remaining useful life (RUL) of life-limited parts in aircraft engines. The discipline within CBM that deals with this is called prognostics and health management (PHM), which covers all aspects of diagnostics and prognostics, including modeling of systems and subsystems, sensing, data transmission, storage and retrieval, analytical methods, and decision making. Traditionally, nondestructive testing (NDT) methods have been employed during the major airplane checks to assess structural damage. These techniques are enhanced with in- situ sensing techniques that can continuously monitor aircraft structures and report on their health. The move to condition-based assessment of maintenance needs to be balanced by the assurance that safety is not compromised, that initial cost of new equipment is amortized by the savings, and that regulatory authorities are on board with any modifications to the planned maintenance schedule. The trend is clearly to include more CBM functions into Maintenance, Repair and Overhaul (MRO) processes so better cost control can be achieved without ever comprising passenger safety.

The new edition of the well known Care and Repair of Advanced Composites, 3rd Edition, improves on the usefulness of this practical guide geared towards the aerospace industry. Keith B. Armstrong, the original lead author of the first edition was still in charge of this project, counting on the expert support of Eric Chesmar, senior composites specialist at United Airlines. Mr. Chesmar is also an active member of SAE International's CACRC (Commercial Aircraft Composite Repair Committee), an elite group of industry experts dedicated to the standardization, safety, security, and efficiency of composite repairs in the airline industry. Mr. Francois Museux (Airbus) and Mr. William F. Cole II also contributed. Care and Repair of Advanced Composites, 3rd Edition, presents a fully updated approach to the training syllabus recommended for repair design engineers and composite repair mechanics. Metal bonding has been included partly because the defi nition of "composite" can be interpreted to include metal-skinned honeycomb panels, and partly because some composite parts have metal fi ttings or reinforcements that must be treated before bonding. This third edition also covers a number of the problems experienced in service, some of which may be applicable to metallic sandwich panels, offers suggestions for design improvements, including repair design as a particular topic, and regulatory changes. Care and Repair of Advanced Composites, 3rd Edition, provides solid technical information and training for a wide range of airline staff.

This book is a collective work by many leading scientists, analysts, mathematicians, and engineers who have been working at the front end of reliability science and engineering. The book covers conventional and contemporary topics in reliability science, all of which have seen extended research activities in recent years. The methods presented in this book are real-world examples that demonstrate improvements in essential reliability and availability for industrial equipment such as medical magnetic resonance imaging, power systems, traction drives for a search and rescue helicopter, and air conditioning systems. The book presents real case studies of redundant multi-state air conditioning systems for chemical laboratories and covers assessments of reliability and fault tolerance and availability calculations. Conventional and contemporary topics in reliability engineering are discussed, including degradation, networks, dynamic reliability, resilience, and multi-state systems, all of which are relatively new topics to the field. The book is aimed at engineers and scientists, as well as postgraduate students involved in reliability design, analysis, experiments, and applied probability and statistics.

Commercial Aircraft Hydraulic Systems: Shanghai Jiao Tong University Press Aerospace Series focuses on the operational principles and design technology of aircraft hydraulic systems, including the hydraulic power supply and actuation system and describing new types of structures and components such as the 2H/2E structure design method and the use of electro hydrostatic actuators (EHAs). Based on the commercial aircraft hydraulic system, this is the first textbook that describes the whole lifecycle of integrated design, analysis, and assessment methods and technologies, enabling readers to tackle challenging high-pressure and high-power hydraulic system problems in university research and industrial contexts. Commercial Aircraft Hydraulic Systems is the latest in a series published by the Shanghai Jiao Tong University Press Aerospace Series that covers the latest advances in research and development in aerospace. Its scope includes theoretical studies, design methods, and real-world implementations and applications. The readership for the series is broad, reflecting the wide range of aerospace interest and application. Titles within the series include Reliability Analysis of Dynamic Systems, Wake Vortex Control, Aeroacoustics: Fundamentals and Applications in Aeropropulsion Systems, Computational Intelligence in Aerospace Engineering, and Unsteady Flow and Aeroelasticity in Turbomachinery. Presents the first book to describe the interface between the hydraulic system and the flight control system in commercial aircraft Focuses on the operational principles and design technology of aircraft hydraulic systems, including the hydraulic power supply and actuation system Includes the most advanced methods and technologies of hydraulic systems Describes the interaction between hydraulic systems and other disciplines