Electromigration In Thin Films And Electronic Devices

Understanding and limiting electromigration in thin films is essential to the continued development of advanced copper interconnects for integrated circuits. Electromigration in thin films and electronic devices provides an up-to-date review of key topics in this commercially important area. Part one consists of three introductory chapters, covering modelling of electromigration phenomena, modelling electromigration using the peridynamics approach and simulation and x-ray microbeam studies of electromigration. Part two deals with electromigration issues in copper interconnects, including x-ray microbeam analysis, voiding, microstructural evolution and electromigration failure. Finally, part three covers electromigration in solder, with chapters discussing topics such as electromigration-induced microstructural evolution and electromigration in flip-chip solder joints. With its distinguished editor and international team of contributors, Electromigration in thin films and electronic devices is an essential reference for materials scientists and engineers in the microelectronics, packaging and interconnects industries, as well as all those with an academic research interest in the field. Provides up-to-date coverage of the continued development of advanced copper interconnects for integrated circuits Comprehensively reviews modelling of electromigration phenomena, modelling electromigration using the peridynamics approach and simulation, and x-ray microbeam studies of electromigration Deals with electromigration issues in copper interconnects, including x-ray microbeam analysis, voiding, microstructural evolution and electromigration failure

This up-to-date handbook covers the main topics of preparation, characterization and properties of complex metal-based layer systems. The authors -- an outstanding group of researchers -- discuss advanced methods for structure, chemical and electronic state characterization with reference to the properties of thin functional layers, such as metallization and barrier layers for microelectronics, magnetoresistive layers for GMR and TMR, sensor and resistance layers. As such, the book addresses materials specialists in industry, especially in microelectronics, as well as scientists, and can also be recommended for advanced studies in materials science, analytics, surface and solid state science.

Electrical and electronic waste is a growing problem as volumes are increasing fast. Rapid product innovation and replacement, especially in information and communication technologies (ICT), combined with the migration from analog to digital technologies and to flat-screen televisions and monitors has resulted in some electronic products quickly reaching the end of their life. The EU directive on waste electrical and electronic equipment (WEEE) aims to minimise WEEE by putting organizational and financial responsibility on producers and distributors for collection, treatment, recycling and recovery of WEEE. Therefore all stakeholders need to be well-informed about their WEEE responsibilities and options. While focussing on the EU, this book draws lessons for policy and practice from all over the world. Part one introduces the reader to legislation and initiatives to manage WEEE. Part two discusses technologies for the refurbishment, treatment and recycling of waste electronics. Part three focuses on electronic products that present particular challenges for recyclers. Part four explores sustainable design of electronics and supply chains. Part five discusses national and regional WEEE management schemes and part six looks at corporate WEEE management strategies. With an authoritative collection of chapters from an international team of authors, Waste electrical and electronic equipment (WEEE) handbook is designed to be used as a reference by policy-makers, producers and treatment operators in both the developed and developing world. Draws lessons for waste electrical and electronic equipment (WEEE) policy and practice from around the world Discusses legislation and initiatives to manage WEEE, including global e-waste initiatives, EU legislation relating to electronic waste, and eco-efficiency evaluation of WEEE take-back systems Sections cover technologies for refurbishment, treatment and recycling of waste, sustainable design of electronics and supply chains, national and regional waste management schemes, and corporate WEEE management strategies

Physics of Thin Films: Advances in Research and Development, Volume 7 is a collection of papers about film growth and structure, optical properties, and semiconducting films. The book covers topics such as diffraction theory; film support and filter fabrication; aging, usage, and cleaning of filters; and properties and applications of III-V compound films. It also discusses topics such as the preparation of use and unbacked metal filters; electromigration in thin films; and the built-up molecular films and their applications. The text is recommended for physicists and engineers involved in thin film physics, especially those who would like to know more about the progresses in the field.

Thin film technology is used in many applications such as microelectronics, optics, hard and corrosion resistant coatings and micromechanics, and thin films form a uniquely versatile material base for the development of novel technologies within these industries. Thin film growth provides an important and up-to-date review of the theory and deposition techniques used in the formation of thin films. Part one focuses on the theory of thin film growth, with chapters covering nucleation and growth processes in thin films, phase-field modelling of thin film growth and surface roughness evolution. Part two covers some of the techniques used for thin film growth, including oblique angle deposition, reactive magnetron sputtering and epitaxial growth of graphene films on single crystal metal surfaces. This section also includes chapters on the properties of thin films, covering topics such as substrate plasticity and buckling of thin films, polarity control, nanostructure growth dynamics and network behaviour in thin films. With its distinguished editor and international team of contributors, Thin film growth is an essential reference for engineers in electronics, energy materials and mechanical engineering, as well as those with an academic research interest in the topic. Provides an important and up-to-date review of the theory and deposition techniques used in the formation of thin films Focusses on the theory and modelling of thin film growth, techniques and mechanisms used for thin film growth and properties of thin films An essential reference for engineers in electronics, energy materials and mechanical engineering

Whilst printed films are currently used in varied devices across a wide range of fields, research into their development and properties is increasingly uncovering even greater potential. Printed films provides comprehensive coverage of the most significant recent developments in printed films and their applications. Materials and properties of printed films are the focus of part one, beginning with a review of the concepts, technologies and materials involved in their production and use. Printed films as electrical components and silicon metallization for solar cells are discussed, as are conduction mechanisms in printed film resistors, and thick films in packaging and microelectronics. Part two goes on to review the varied applications of printed films in devices. Printed resistive sensors are considered, as is the role of printed films in capacitive, piezoelectric and pyroelectric sensors, mechanical micro-systems and gas sensors. The applications of printed films in biosensors, actuators, heater elements, varistors and polymer solar cells are then explored, followed by a review of screen printing for the fabrication of solid oxide fuel cells and laser printed micro- and meso-scale power generating devices. With its distinguished editors and international team of expert contributors, Printed films is a key text for anyone working in such fields as microelectronics, fuel cell and sensor technology in both industry and academia. Provides a comprehensive analysis of the most significant recent developments in printed films and their applications Reviews the concepts, properties, technologies and materials involved in the production and use of printed films Analyses the varied applications of printed films in devices, including printed restrictive sensors for physical quantities and printed thick film mechanical micro-systems (MEMS), among others

Advanced techniques for characterizing thin film growth in situ help to develop improved understanding and faster diagnosis of issues with the process. In situ characterization of thin film growth reviews current and developing techniques for characterizing the growth of thin films, covering an important gap in research. Part one covers electron diffraction techniques for in situ study of thin film growth, including chapters on topics such as reflection high-energy electron diffraction (RHEED) and inelastic scattering techniques. Part two focuses on photoemission techniques, with chapters covering ultraviolet photoemission spectroscopy (UPS), X-ray photoelectron spectroscopy (XPS) and in situ spectroscopic ellipsometry for characterization of thin film growth. Finally, part three discusses alternative in situ characterization techniques. Chapters focus on topics such as ion beam surface characterization, real time in situ surface monitoring of thin film growth, deposition vapour monitoring and the use of surface x-ray diffraction for studying epitaxial film growth. With its distinguished editors and international team of contributors, In situ characterization of thin film growth is a standard reference for materials scientists and engineers in the electronics and photonics industries, as well as all those with an academic research interest in this area. Chapters review electron diffraction techniques, including the methodology for observations and measurements Discusses the principles and applications of photoemission techniques Examines alternative in situ characterisation techniques