Fluid Flow Heat And Mass Transfer At Bodies Of Different Shapes

Most of the equations governing the problems related to science and engineering are nonlinear in nature. As a result, they are inherently difficult to solve. Analytical solutions are available only for some special cases. For other cases, one has no easy means but to solve the problem must depend on numerical solutions. Fluid Flow, Heat and Mass Transfer at Bodies of Different Shapes: Numerical Solutions presents the current theoretical developments of boundary layer theory, a branch of transport phenomena. Also, the book addresses the theoretical developments in the area and presents a number of physical problems that have been solved by analytical or numerical method. It is focused particularly on fluid flow problems governed by nonlinear differential equations. The book is intended for researchers in applied mathematics, physics, mechanics and engineering. Addresses basic concepts to understand the theoretical framework for the method Provides examples of nonlinear problems that have been solved through the use of numerical method Focuses on fluid flow problems governed by nonlinear equations

Very Good,No Highlights or Markup,all pages are intact.

Interest in studying the phenomena of convective heat and mass transfer between an ambient fluid and a body which is immersed in it stems both from fundamental considerations, such as the development of better insights into the nature of the underlying physical processes which take place, and from practical considerations, such as the fact that these idealised configurations serve as a launching pad for modelling the analogous transfer processes in more realistic physical systems. Such idealised geometries also provide a test ground for checking the validity of theoretical analyses. Consequently, an immense research effort has been expended in exploring and understanding the convective heat and mass transfer processes between a fluid and submerged objects of various shapes. Among several geometries which have received considerable attention are plates, circular and elliptical cylinders, and spheres, although much information is also available for some other bodies, such as corrugated surfaces or bodies of relatively complicated shapes. The book is a unified progress report which captures the spirit of the work in progress in boundary-layer heat transfer research and also identifies potential difficulties and areas for further study. In addition, this work provides new material on convective heat and mass transfer, as well as a fresh look at basic methods in heat transfer. Extensive references are included in order to stimulate further studies of the problems considered. A state-of-the-art picture of boundary-layer heat transfer today is presented by listing and commenting also upon the most recent successful efforts and identifying the needs for further research.

This book provides the first comprehensive state-of-the-art research on tree (dendritic) fluid flow and heat transfer. It covers theory, numerical simulations and applications. It can serve as extra reading for graduate-level courses in engineering and biotechnology. Tree flow networks, also known as dendritic flow networks, are ubiquitous in nature and engineering applications. Tree-shaped design is prevalent when the tendency of the flow (fluid, energy, matter and information) is to move more easily between a volume (or area) and a point, and vice versa. From the geophysical trees to animals and plants, we can observe numerous systems that exhibit tree architectures: river basins and deltas, lungs, circulatory systems, kidneys, vascularized tissues, roots, stems, and leaves, among others. Tree design is also prevalent in man-made flow systems, both in macro- and microfluidic devices. A vast array of tree-shaped design is available and still emerging in chemical engineering, electronics cooling, bioengineering, chemical and bioreactors, lab-on-a-chip systems, and smart materials with volumetric functionalities, such as self-healing and self-cooling. This book also addresses the basic design patterns and solutions for cooling bodies where there is heat generation. Several shapes of fin as well as assemblies of fins are addressed. An up-to-date review of cavities, i.e., inverted or negative fins, for facilitating the flow of heat is also presented. Heat trees using high thermal conductivity material can be used in the cooling of heat-generating bodies, and can also be applied to the cooling of electronics.

Heat and Mass Transfer in Capillary-Porous Bodies describes the modern theory of heat and mass transfer on the basis of the thermodynamics of irreversible processes. This book provides a systematic account of the phenomena of heat and mass transfer in capillary-porous bodies. Organized into 10 chapters, this book begins with an overview of the processes of the transfer of heat and mass of a substance. This text then examines the application of the theory to the investigation of heat and mass exchange in walls and in technological processes for the manufacture of building materials. Other chapters consider the thermal properties of building materials by using the methods of the thermodynamics of mass transfer. The final chapter deals with the method of finite differences, which is applicable to the solution of problems of non-steady heat conduction. This book is a valuable resource for scientists, post-graduate students, engineers, and students in higher educational establishments for architectural engineering.

Heat transfer is the area of engineering science which describes the energy transport between material bodies due to a difference in temperature. The three different modes of heat transport are conduction, convection and radiation. In most problems, these three modes exist simultaneously. However, the significance of these modes depends on the problems studied and often, insignificant modes are neglected. Very often books published on Computational Fluid Dynamics using the Finite Element Method give very little or no significance to thermal or heat transfer problems. From the research point of view, it is important to explain the handling of various types of heat transfer problems with different types of complex boundary conditions. Problems with slow fluid motion and heat transfer can be difficult problems to handle. Therefore, the complexity of combined fluid flow and heat transfer problems should not be underestimated and should be dealt with carefully. This book: Is ideal for teaching senior undergraduates the fundamentals of how to use the Finite Element Method to solve heat transfer and fluid dynamics problems Explains how to solve various heat transfer problems with different types of boundary conditions Uses recent computational methods and codes to handle complex fluid motion and heat transfer problems Includes a large number of examples and exercises on heat transfer problems In an era of parallel computing, computational efficiency and easy to handle codes play a major part. Bearing all these points in mind, the topics covered on combined flow and heat transfer in this book will be an asset for practising engineers and postgraduate students. Other topics of interest for the heat transfer community, such as heat exchangers and radiation heat transfer, are also included.

The book is devoted to investigation of a series of problems of convective heat and mass transfer in rotating-disk systems. Such systems are widespread in scienti?c and engineering applications. As examples from the practical area, one can mention gas turbine and computer engineering, disk brakes of automobiles, rotating-disk air cleaners, systems of microclimate, extractors, dispensers of liquids, evaporators, c- cular saws, medical equipment, food process engineering, etc. Among the scienti?c applications, it is necessary to point out rotating-disk electrodes used for experim- tal determination of the diffusion coef?cient in electrolytes. The system consisting of a ?xed disk and a rotating cone that touches the disk by its vertex is widely used for measurement of the viscosity coef?cient of liquids. For time being, large volume of experimental and computational data on par- eters of ?uid ?ow, heat and mass transfer in different types of rotating-disk systems have been accumulated, and different theoretical approaches to their simulation have been developed. This obviously causes a need of systematization and generalization of these data in a book form.

Heat and Fluid Flow in Power System Components is a collection of papers presented at the Second Conference on Mechanical Power Engineering held in Cairo, Egypt in September 1978. This volume covers a wide range of topics relating to heat and fluid flow in power system components, including film cooling, droplet evaporation, and laminar flames. Practical applications such as furnaces, heat exchanges, pumps, and turbines are also discussed. Results of investigations carried out experimentally, by computation, and both computation and experimentation techniques are presented. This book is comprised of 21 chapters and begins with an analysis of heat transfer in power elements, including evaporation of surface liquid droplet in an air stream. The thermal conductivity of granular materials is also examined. The following chapters explore reactive and non-reactive flows, paying particular attention to helium two-phase instabilities; air flow around hyperbolic cooling towers; pulsating flow in axial turbines; laminar flame propagation in tubes; and characteristics of combustion heat liberated downstream of circular bluff bodies. The final chapter is devoted to an experimental and theoretical investigation of the reversed flow furnace. This monograph will be of interest to chemical and mechanical engineers as well as researchers concerned with the design, development, and optimum modes of operations of power systems and their components.