Fluoropolymers In The 21st Century

Fluoropolymers in the 21st Century is a concise but complete tutorial on these high performance materials from manufacturing to disposal, with a particularly emphasis on sustainability. The book considers three primary factors which are having an impact on the industry: environmental concerns and the need for improved sustainability, globalization of manufacturing and consumption, and the transition of legacy companies out of traditional materials and into the life sciences. With the fate of the industry uncertain, the book traces the trends developed through the early decades of the material through to the present day and beyond, providing a thorough introduction to new practitioners in this field, and presenting key expert insights into the future direction in fluoropolymer technologies and products. By putting together this information and insight into a single volume, this book provides materials scientists, chemical engineers, polymer scientists and engineers working in a range of industries - such as automotive, aerospace, power generation, and chemical processing - with an introduction to fluoropolymer materials and current trends in their use, as well as indicating future directions for research and application in this field. A concise introduction to fluoropolymers, with a particular emphasis on the state of the market, and increasingly important environmental, health and safety aspects Assists in decision-making in relation to application development, materials selection, and end-of-life considerations of fluoropolymers Gives expert insight to help readers understand the key trends and changes in the fluoropolymer industries, technologies, and products

This third edition has been updated and expanded, providing industrial chemists, technologists, environmental scientists, and engineers with an accurate, compact, and practical source of information on fluoropolymers. Highlighting existing and new industrial, military, medical, and consumer goods applications, this edition adds more detailed information on equipment and processing conditions. It explores breakthroughs in understanding property-structure relationships, new polymerization techniques, and the chemistry underlying polymers, such as melt-processable fluoroplastics. It also expands on the important properties of fluoropolymers, including heat and radiation degradation, health effects, and recycling. Features: Revised, updated, and expanded to continue to provide an accurate, compact, and practical source of information on fluoropolymers Explores the property-structure relationships, polymerization techniques, and the chemistry underlying polymers Fluoropolymers rank high on the specialty polymers group and, due to their unique properties, are naturally part of the solution to the industrial sustainability challenges of the twenty-first century Describes the technology of fluoropolymers, including thermoplastic and elastomeric products Expands upon the important characteristics of fluoropolymers and their recycling.

What does cotton candy, which dissolves at the touch, have in common with Kevlar, used for bullet-proof vests? How can our understanding of such materials help us to tackle essential problems of the 21st century? Materials play a key role in our search for solutions to many pressing issues. They underpin many industries, are critical for the development of consumer goods, are essential components of medical diagnostic techniques, offer hope for the treatment of currently incurable diseases, and provide answers to environmental problems. This handbook is a guide to the materials we rely on for the future. Materials for the 21st Century serves as a useful resource for undergraduate and high school students preparing for a career in physical sciences, life sciences,or engineering, by helping them to identify new areas of interest. It is also an excellent reference for readers interested in learning more about the diverse range of materials that underlie key aspects of our economy and everyday lives.

Introduction to Fluoropolymers, Second Edition, provides a comprehensive overview of the history, principles, properties, processing and applications of fluoropolymers, supporting their development and utilization in high-performance applications, components, and products. This second edition has been updated and expanded to include new in-depth chapters on manufacturing and applications of PTFE and melt processible fluoropolymers. The book begins by demonstrating the role of fluoropolymers in everyday life, before introducing the history and basic principles of fluoropolymers. This is followed by detailed coverage of the main fluoropolymer types. Properties and applications are illustrated by real-world examples as diverse as waterproof clothing, vascular grafts and coatings for aircraft interiors. The different applications of fluoropolymers show the benefits of a group of materials that are highly water-repellant and flame-retardant, with unrivalled lubrication properties and a high level of biocompatibility. Health and safety and environmental aspects are also covered throughout the book, with a final chapter examining safety, disposal, and recycling in detail. This book is an essential resource for anyone looking to understand or use fluoropolymer materials in their products. This includes engineers, product designers, manufacturers, scientists, researchers, and other professionals, across industries such as automotive, aerospace, medical devices, food and beverages, high performance apparel, oil and gas, renewable energy, solar photovoltaics, electronics and semiconductors, pharmaceuticals, and chemical processing. This is also a valuable introductory guide for academic researchers and advanced students in plastics engineering, polymer science, and materials science. Introduces and demystifies fluoropolymers for a wide audience of engineers, designers, professionals, and researchers, across industries and disciplines Covers a broad range of materials, including polytetrafluoroethylene (PTFE), polyvinyl fluoride (PVF), vinylidene fluoride polymers, fluoroelastomers, and more Focuses on properties, processing methods and advanced industrial applications of fluoropolymers

The 75th Anniversary Celebration of the Division of Polymeric Materials: Science and Engineering of the American Chemical Society, in 1999 sparked this third edition of Applied Polymer Science with emphasis on the developments of the last few years and a serious look at the challenges and expectations of the 21st Century. This book is divided into six sections, each with an Associate Editor responsible for the contents with the group of Associate Editors acting as a board to interweave and interconnect various topics and to insure complete coverage. These areas represent both traditional areas and emerging areas, but always with coverage that is timely. The areas and associated chapters represent vistas where PMSE and its members have made and are continuing to make vital contributions. The authors are leaders in their fields and have graciously donated their efforts to encourage the scientists of the next 75 years to further contribute to the well being of the society in which we all live. Synthesis, characterization, and application are three of the legs that hold up a steady table. The fourth is creativity. Each of the three strong legs are present in this book with creativity present as the authors were asked to look forward in predicting areas in need of work and potential applications. The book begins with an introductory history chapter introducing readers to PMSE. The second chapter introduces the very basic science, terms and concepts critical to polymer science and technology. Sections two, three and four focus on application areas emphasizing emerging trends and applications. Section five emphasizes the essential areas of characterization. Section six contains chapters focusing of the synthesis of the materials.

Fluoropolymers are unique materials. Since the middle of the twentieth century fluropolymers have been used in applications where a wide temperature range, a high resistance to aggressive media, excellent tribological characteristics, and specific low adhesion are required. Today, researchers turn to fluoropolymers to solve new challenges and to develop materials with previously unattainable properties. Fascinating Fluoropolymers and Their Applications covers recent developments of fluoropolymer applications in energy, optical fibers, blood substitutes, textile coatings, membranes and other areas, written by experts in these fields. This volume in the Progress in Fluorine Science series is ideal for researchers and engineers who want to learn about the technology and applications of these special polymers, as well as industrial manufacturers who are interested in achieving new product characteristics in their respective industries. Written by a global team of fluoropolymer experts Includes use of fluoropolymer membranes for various applications in fuel cells, for gases separation, and more Covers fluoropolymer materials with shape memory, in cardiopulmonary bypass systems, in the production of textile materials, and in other areas

In this first book on an additive group of growing importance, the authors review the commercial additives available on the market. The applications chapters provide you with a step by step description of techniques to select and incorporate these additives in various products. Engineers and scientits involved in polymer processing need practical information about these additives, their applications, and proper and safe handling. Until now much of this information has been difficult to obtain because of commercial secrecy. In recent years, the applications of fluoropolymer additives have expanded significantly, with even the meaning of ‘fluoropolymer additives’ expanding from relatively the narrow definition of PTFE powder fillers to a wide variety of fluoropolymer elastomers, used as a processing aid for plastics processing such as extrusion, injection molding, and film blowing. The benefits of fluoropolymer additives used in plastics are the elimination of sharkskin defects, increases in process speed and output (up to 20%), the reduction of die build up, the reduction of gels and optical defects, etc. In addition, fluropolymer additives are being increasingly used in inks, lubricants, and coatings. For example, in the coating industry fluoropolymer additives can increase the life cycle of exterior coatings due to their excellent weatherability and subsequently increase the time between recoats. Fluoropolymer additives are becoming more widely used with key applications including use as a polymer processing aid (increasing speed and reducing faults) and as an additive to lubricants, inks and coatings. This book is the only practical guide available to the selection and use of fluoropolymer additives, and will help readers to optimize existing fluoropolymer applications and implement new ones Fluoropolymers are known as an area where detailed information is hard to come by. In this book two former DuPont employees provide a wide range of industry sectors with the essential practical information and data they need to realize the full benefits of fluoropolymer additives Written for practicing engineers, Ebnesajjad and Morgan take a highly practical approach to the subject, based on real-world experience and case studies

Fluoropolymers were discovered accidentally by Plunkett in 1938. He was working on freon and accidentally polymerised tetrafluoroethylene. The result was polytetrafluoroethylene (PTFE), more commonly known as Teflon. PTFE is inert to virtually all chemicals and is considered to be the most slippery material in existence - it has the lowest coefficient of friction of any known solid material. These properties have made it one of the most valuable and versatile technologies ever invented, contributing to significant advancements in areas such as aerospace, communications, electronics, industrial.