Gas Turbine Engineering

The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems

The gas turbine is a power plant which produces a great amount of energy for its size and weight. This is a comprehensive treatment of gas turbines. The author discusses the design, fabrication, installation, operation and maintenance of gas turbines. He presents the necessary data, along with suggestions to assist engineers in obtaining optimum performance for any gas turbine, under all conditions. The intent of the work is to serve as a reference text after it has accomplished its primary objective of introducing the reader to the broad subject of gas turbines.

The science of gas turbines is an ancient one and is being evolving ever since its discovery. The rise of new technology has positively affected the development process of this technology. Gas turbines are internal combustion engine. They are used to power ships, tanks, aircrafts, trains and even electric generators. The book aims to shed light on some of the unexplored aspects of gas turbine technology. It is a valuable compilation of topics, ranging from the basic to the most complex theories and principles in the field of gas turbines. The topics covered in this extensive book deal with the core subjects of this field. Coherent flow of topics, student-friendly language and extensive use of examples make this textbook an invaluable source of knowledge. It will serve as a reference to a broad spectrum of readers.

This book written by a world-renowned expert with more than forty years of active gas turbine R&D experience comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently available gas turbine handbooks that provide the reader with an overview without in-depth treatment of the subject, the current book is concentrated on a detailed aero-thermodynamics, design and off-deign performance aspects of individual components as well as the system integration and its dynamic operation.This new book provides practicing gas turbine designers and young engineers working in the industry with design material that the manufacturers would keep proprietary. The book is also intended to provide instructors of turbomachinery courses around the world with a powerful tool to assign gas turbine components as project and individual modules that are integrated into a complete system. Quoting many statements by the gas turbine industry professionals, the young engineers graduated from the turbomachinery courses offered by the author, had the competency of engineers equivalent to three to four years of industrial experience.

Full text engineering e-book.