Gb T 2975 2018 Translated English Of Chinese Standard Gbt 2975 2018 Gb T2975 2018 Gbt2975 2018

This Standard specifies the designation, sampling location and preparation requirements of mechanical testing of section steel, steel bar, steel wire rod, steel plate and steel pipe defined in GB/T 15574. This Standard is applicable to the sampling and preparation of samples and test pieces for mechanical testing of steel and steel products. If it is indicated in the contract, this Standard is also applicable to other metal products. These test materials and samples can be tested in accordance with relevant product standards, material standards or test standards.

This Standard specifies the requirements of the mechanical testing, sampling location and sample preparation of the section steel, steel bar, steel plate and steel tube defined in GB/T 15574. Through negotiation on both sides, this Standard may also adopt other metal products for sampling.

This Standard specifies classification, design and selection principles, requirements for surface repair technology for remanufacturing of mechanical product. This Standard is applicable to design and selection of materials, techniques and processes.

This Standard specifies personnel requirements, facilities and equipment, testing procedures, testing steps and sample management procedures for label conformance testing. This Standard is applicable to label conformance testing of various products.

This part of GB/T 325 specifies the classification, materials, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of steel drums. This section applies to the manufacture, circulation, use and supervision and inspection of steel drums.

This Standard specifies the classification, performance requirements and test method for the plates and labels use don road vehicle to describe the vehicle information. This Standard is applicable to various types of plates and labels used on road vehicles to describe the vehicle manufacturing information, warning information, manipulation and indicative information. This Standard is not applicable to the directly-formed vehicle labels through marking, etching, casting, spraying, printing on the vehicle or vehicle components; or through sewing on the bodies of the components.

This Standard specifies the alloy designations and codes, technical requirements, test methods and inspection rules for casting zinc alloys. This Standard is applicable to the zinc alloys for zinc alloy castings (excluding die castings).

This Standard specifies the module and diameter of cylindrical worm. This Standard applies to worms of cylindrical worm gears.