General Momentum Theory For Horizontal Axis Wind Turbines

This book reconsiders the basic approaches behind the BEM method and in particular assesses and validates the equations forming the general momentum theory. One part of the book concerns the validation, using numerical fluid mechanics (CFD), of the different terms in the equations forming the momentum theory. Other parts present new ideas for extending the theory and for enhancing the accuracy of the BEM approach. Besides a general introduction and explanation of the momentum theory, the book also deals with specialized topics, such as diffusor-augmented rotors, wind tunnel corrections, tip corrections, and combined momentum/vortex theory for design of wind turbine rotors. The book contains new as well as already published material, and the author has strived to put the material into a new and more consistent context than what usually is found in similar text books. The book is primarily intended for researchers and experienced students with a basic knowledge in fluid mechanics wishing to understand and expand their knowledge on wind turbine aerodynamics. The book is self-consistent, hence all necessary derivations are shown, and it should not be necessary to seek help in other literature to understand the contents of the book.

Focusing on Aerodynamics of Wind Turbines with topics ranging from Fundamental to Application of horizontal axis wind turbines, this book presents advanced topics including: Basic Theory for Wind turbine Blade Aerodynamics, Dynamics-Based Health Monitoring and Control of Wind Turbine Rotors, Experimental Testing of Wind Turbines Using Wind Tunnels with an Emphasis on Small-Scale Wind Turbines Under Low-Reynolds Numbers, Computational Methods, Ice Accretion for Wind Turbines and Influence of Some Parameters, and Special Structural Reinforcement Technique for Wind Turbine Blades. Consequently, for these reasons, analysis of wind turbines will attract readers not only from the wind energy community but also in the gas turbines heat transfer and fluid mechanics community.

Wind power is an increasingly significant renewable energy resource, producing no environmentally damaging CO2 emissions. The efficient production of electricity by wind turbines relies on aerodynamics: Aerodynamics of Wind Turbines provides the fundamental solutions to efficient wind turbine design. Following a historical introduction, Part 1 of Aerodynamics of Wind Turbines is concerned with basic rotor aerodynamics, while Part 2 deals with structural aspects of the wind turbine and calculation of the loads on it. Topics covered include increasing mass flow through the turbine, performance at low and high wind speeds, assessment of the extreme conditions under which the turbine will perform and the theory for calculating the lifetime of the turbine. The classical Blade Element Momentum method is also covered, as are eigenmodes and the dynamic behavior of a turbine. Aerodynamics of Wind Turbines is an essential reference for both engineering students and others with a professional or academic interest in the physics and technologies behind horizontal axis wind turbines. It will provide a sound understanding of the mechanisms behind the generation of forces on a wind turbine.

WIND ENERGY EXPLAINED Authoritative and bestselling textbook detailing the many aspects of using wind as an energy source Wind Energy Explained provides complete and comprehensive coverage on the topic of wind energy, starting with general concepts like the history of and rationale for wind energy and continuing into specific technological components and applications along with the new recent developments in the field. Divided into 16 chapters, this edition includes up-to-date data, diagrams, and illustrations, boasting an impressive 35% new material including new sections on metocean design conditions, wind turbine design, wind power plants and the electrical system, fixed and floating offshore wind turbines, project development, permitting and environmental risks and benefits, turbine installation, operation and maintenance, and high penetration wind energy systems and power-to-X. Wind Energy Explained also includes information on: Modern wind turbines, covering the design and their many components such as the rotor, drive train, and generator Aerodynamics of wind energy, covering one-dimensional momentum theory, the Betz limit, and ideal horizontal axis wind turbine with wake rotation Environmental external design conditions, such as wind, waves, currents, tides, salinity, floating ice, and many more Commonly used materials and components, such as steel, composites, copper, and concrete, plus machinery elements, such as shafts, couplings, bearings, and gears Modern design methods, including probabilistic design Environmental effects and mitigation strategies for wind project siting and the role of public engagement in the development process This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practicing engineers. It may also be used as a textbook resource for university level courses in wind energy, both introductory and advanced.

Fully updated and authoritative reference to wind energy technology written by leading academic and industry professionals The newly revised Third Edition of the Wind Energy Handbook delivers a fully updated treatment of key developments in wind technology since the publication of the book's Second Edition in 2011. The criticality of wakes within wind farms is addressed by the addition of an entirely new chapter on wake effects, including 'engineering' wake models and wake control. Offshore, attention is focused for the first time on the design of floating support structures, and the new 'PISA' method for monopile geotechnical design is introduced. The coverage of blade design has been completely rewritten, with an expanded description of laminate fatigue properties and new sections on manufacturing methods, blade testing, leading-edge erosion and bend-twist coupling. These are complemented by new sections on blade add-ons and noise in the aerodynamics chapters, which now also include a description of the Leishman-Beddoes dynamic stall model and an extended introduction to Computational Fluid Dynamics analysis. The importance of the environmental impact of wind farms both on- and offshore is recognized by expanded coverage, and the requirements of the Grid Codes to ensure wind energy plays its full role in the power system are described. The conceptual design chapter has been extended to include a number of novel concepts, including low induction rotors, multiple rotor structures, superconducting generators and magnetic gearboxes. References and further reading resources are included throughout the book and have been updated to cover the latest literature. As in previous editions, the core subjects constituting the essential background to wind turbine and wind farm design are covered. These include: The nature of the wind resource, including geographical variation, synoptic and diurnal variations, and turbulence characteristics The aerodynamics of horizontal axis wind turbines, including the actuator disc concept, rotor disc theory, the vortex cylinder model of the actuator disc and the Blade-Element/Momentum theory Design loads for horizontal axis wind turbines, including the prescriptions of international standards Alternative machine architectures The design of key components Wind turbine controller design for fixed and variable speed machines The integration of wind farms into the electrical power system Wind farm design, siting constraints, and the assessment of environmental impact Perfect for engineers and scientists learning about wind turbine technology, the Wind Energy Handbook will also earn a place in the libraries of graduate students taking courses on wind turbines and wind energy, as well as industry professionals whose work requires a deep understanding of wind energy technology.

Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)