Hazardous Area Classification In Petroleum And Chemical Plants

Due to an increase in the wide-range of chemicals in petrochemical processing industries, as well as frequency of use, there has been a steady rise in flammability problems and other hazards. Hazardous Area Classification in Petroleum and Chemical Plants: A Guide to Mitigating Risk outlines the necessities of explosion protection in oil, gas and chemical industries, and discusses fire and occupancy hazards, extinguishing methods, hazard identification, and classification of materials. This book addresses these issues and concerns and presents a simple hazard identification system to help offset future problems. It offers information on the hazards of various materials and their level of severity as it relates to fire prevention, exposure, and control. The system provides an alerting signal and on-the-spot information to help protect lives in an industrial plant or storage location during fire emergencies. Understanding the hazard helps to ensure that the process equipment is properly selected, installed, and operated to provide a safe operating system. This text also includes a summary of the rules, methods, and requirements for fighting a fire, introduces various hazard identification systems. • Includes a summary of the rules, methods, and requirements needed to extinguish a fire • Introduces various hazard identification systems • Includes concepts for layout and spacing of equipment in process plants The book serves as resource for plant design engineers as well as plant protection and safety personnel in planning for effective firefighting operations.

The degree of danger in the atmosphere of a hazardous location needs to be determined prior to selecting an acceptable electrical equipment installation. If maximum safety is the predominant factor in determining the type of electrical installations, the cost of electrical equipment will be extremely high. If low cost of electrical installation is the predominant factor, safety to personnel and equipment may be unacceptably low. It is, therefore, necessary to find a point of balance at which the cost and safety requirements are both satisfied and acceptable. In nine out of ten cases, a hazardous location is classified much too conservatively. The reason for this conservative approach is a lack of knowledge and a misunderstanding of the actual concept of safety and danger. This book provides an in-depth understanding of the factors that influence the classification of a hazardous location. One factor, in combination with one or more other factors, will have an impact on the level of danger and its hazardous boundaries. These factors and their influences are explained in detail, and once their impact is understood, the classification of a hazardous location becomes a straightforward procedure.

A report presenting an approach applicable to classification of upstream and downstream petroleum facilities by consideration of the individual point source procedure in Chapter 5 of the Area Classification Code.

The fourth edition of Ludwig’s Applied Process Design for Chemical and Petrochemical Plants, Volume Three is a core reference for chemical, plant, and process engineers and provides an unrivalled reference on methods, process fundamentals, and supporting design data. New to this edition are expanded chapters on heat transfer plus additional chapters focused on the design of shell and tube heat exchangers, double pipe heat exchangers and air coolers. Heat tracer requirements for pipelines and heat loss from insulated pipelines are covered in this new edition, along with batch heating and cooling of process fluids, process integration, and industrial reactors. The book also looks at the troubleshooting of process equipment and corrosion and metallurgy. Assists engineers in rapidly analyzing problems and finding effective design methods and mechanical specifications Definitive guide to the selection and design of various equipment types, including heat exchanger sizing and compressor sizing, with established design codes Batch heating and cooling of process fluids supported by Excel programs

This third edition of Applied Process Design for Chemical and Petrochemical Plants, Volume 3, is completely revised and updated throughout to make this standard reference more valuable than ever. It has been expanded by more than 200 pages to include the latest technological and process developments in heat transfer, refrigeration, compression and compression surge drums, and mechanical drivers. Like other volumes in this classic series, this one emphasizes how to apply techniques of process design and how to interpret results into mechanical equipment details. It focuses on the applied aspects of chemical engineering design to aid the design and/or project engineers in rating process requirements, specifying for purchasing purposes, and interpreting and selecting the mechanical equipment needed to satisfy the process functions. Process chemical engineering and mechanical hydraulics are included in the design procedures. Includes updated information that allows for efficiency and accuracy in daily tasks and operations Part of a classic series in the industry