How To Build Glued Lapstrake Wooden Boats

As a child, John Brooks loved to build models and sail with his grandfather. When most teenagers were at the prom, John was changing jibs in the Indian Ocean, halfway through a 35,000-mile, two-year cruise. He began building boats in commercial yards at 19, while studying boat design and building his own boats. John worked for many years honing his craftsmanship on fine yachts, small boats, custom furniture, and a harpsichord. He has been a instructor at the WoodenBoat School in Maine since the mid-1990s, teaching glued-lapstrake boatbuilding, fine interior joinery, and carving. Ruth Ann Hill grew up on the coast of Maine. A writer, boatbuilding assistant, naturalist, and graphic artist, Ruth is the author of Discovering Old Bar Harbor and Acadia National Park: An Unconventional Guide and a contributing editor for Maine Boats & Harbors magazine. John and Ruth started their business, Brooks Boats, in 1991. They design and build glued-lapstrake boats in West Brooklin, Maine-and get out to enjoy their handiwork in its proper element whenever they can.

After a successful career in centreboard racing dinghies, Ian Oughtred became one of the leading lights of the British wooden boat revival, designing, building and sailing many remarkable craft. These boats have gained a world-wide reputation for their elegance of line, sound construction and execellent sailing performance. His perfectionist approach may be unbusinesslike, but provides highly refined designs and detailed plans. In this he hopes to encourage a return to a deep appreciation of traditional values of craftsmanship, believing this is the vital part of the true education, and thus helps to nourish the human spirit in an impoverished age.

Learn the Ins and Outs of Building Lapstrake, Carvel, Stitch-and-Glue, Strip-Planked, and Other Wooden Boats Whether you are contemplating your first-ever boatbuilding project or trying to decide what design you'd like to build next, Greg Rössel can help. Here's just a glimpse of what's inside this complete overview of wooden boatbuilding: How rowing, sailing, paddling, and powerboat designs perform, and how they compare in cost, time, and necessary skills for building How wooden boats are built, including the pros and cons of carvel, lapstrake, dory lap, stitch and glue, strip plank, and other methods How to choose the best boat and building method for your next project How to loft a hull, steam bend frames, scarf a joint, cut a rabbet, laminate stems, and spile planks How to take the lines off an old classic whose plans have been lost How to make oars, spars, coamings, knees, gaff jaws, cleats, and more Greg Rössel writes with warmth, wit, and an engaging style. The Boatbuilder's Apprentice is a must guide for anyone planning or even dreaming about building a wooden boat. “Greg Rössel is a Renaissance man. While there are many talented boatbuilders in the world, only a handful are also good teachers. Even fewer can write or illustrate effectively. Yet this author is highly skilled in each of these areas. . . . The Boatbuilder's Apprentice is a successful blend of technique and wisdom, and is, I believe, destined to become a classic.”-Karen Wales, WoodenBoat Review

David C. "Bud" McIntosh was a designer, builder, and sailor of large and small wooden cruising boats for more than 50 years, and wrote about it for over 10 of those years. He made his home on New Hampshire's Piscataqua River, where he was teacher and friend to both amateur and professional boatbuilders.

Greg Rossel grew up cruising the waters of New York Harbor and spending time in the boatyards on the south shore of Staten Island where economics (more than anything else) made wooden boats the craft of choice. He makes his home in Maine where he specializes in the construction and repair of small wooden boats, as well as writing for several publications. Greg has been an instructor at WoodenBoat School in Maine since the mid-1980's, teaching lofting, skiff building, and the "Fundamentals of Boatbuilding".

Ultralight canoes and small boats are things of beauty, their apparent delicacy concealing great strength. They are lapstrake-constructed from marine plywood planks, each plank overlapping the one below it in a gracefully curved hull. Epoxy glue along the laps gives the hull structural reinforcement, minimizing the need for framing and permitting an amazingly light structure. Round-bilged and elegant, they are built over jigs, but the method is straightforward and not time consuming. You can build a boat that will give you fun and satisfaction, one you can be proud of, in a winter of leisurely weekends. No fancy tools are needed, and care and patience will make up whatever you lack in woodworking skills. All the information you need is here. Tom Hill, the chief proponent of ultralight boatbuilding and its leading practitioner, describes the method from start to finish using a skiff and canoe as examples. In the appendix is a gallery of ultralight designs, all but one of which you can build without lofting. If you want more flexibility, however, you can adapt almost any lapstrake small-boat design, traditional or modern, to the ultralight method. With some lofting (directions for which are given) you may then build a wide range of boats whose offsets are available. And you may adjust planking thickness and scantlings to give your boat extremely light weight with normal strength, or moderate weight with great strength. Particularly if you lack an extensively equipped workshop and professional skills, Ultralight Boatbuilding will unlock exciting possibilities you considered out of reach.

A celebration of the work of popular wooden boat designer Iain Oughtred with colour photography showcasing the beauty of the boats as well as the Scottish landscape where he is based.

Learn the Ins and Outs of Building Lapstrake, Carvel, Stitch-and-Glue, Strip-Planked, and Other Wooden Boats Whether you are contemplating your first-ever boatbuilding project or trying to decide what design you'd like to build next, Greg Rössel can help. Here's just a glimpse of what's inside this complete overview of wooden boatbuilding: How rowing, sailing, paddling, and powerboat designs perform, and how they compare in cost, time, and necessary skills for building How wooden boats are built, including the pros and cons of carvel, lapstrake, dory lap, stitch and glue, strip plank, and other methods How to choose the best boat and building method for your next project How to loft a hull, steam bend frames, scarf a joint, cut a rabbet, laminate stems, and spile planks How to take the lines off an old classic whose plans have been lost How to make oars, spars, coamings, knees, gaff jaws, cleats, and more Greg Rössel writes with warmth, wit, and an engaging style. The Boatbuilder's Apprentice is a must guide for anyone planning or even dreaming about building a wooden boat. “Greg Rössel is a Renaissance man. While there are many talented boatbuilders in the world, only a handful are also good teachers. Even fewer can write or illustrate effectively. Yet this author is highly skilled in each of these areas. . . . The Boatbuilder's Apprentice is a successful blend of technique and wisdom, and is, I believe, destined to become a classic.”-Karen Wales, WoodenBoat Review