Industrial Digital Control Systems

Includes: Digital signals and systems. Digital controllers for process control applications. Design of digital controllers. Control of time delay systems. State-space concepts. System identification. Introduction to discrete optimal control. Multivariable control. Adaptive control. Computer aided design for industrial control systems. Reliability and redundancy in microprocessor controllers. Software and hardware aspects of industrial controller implementations. Application of distributed digital control algorithms to power stations. An expert system for process control.

The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.

Digital controllers are part of nearly all modern personal, industrial, and transportation systems. Every senior or graduate student of electrical, chemical or mechanical engineering should therefore be familiar with the basic theory of digital controllers. This new text covers the fundamental principles and applications of digital control engineering, with emphasis on engineering design. Fadali and Visioli cover analysis and design of digitally controlled systems and describe applications of digital controls in a wide range of fields. With worked examples and Matlab applications in every chapter and many end-of-chapter assignments, this text provides both theory and practice for those coming to digital control engineering for the first time, whether as a student or practicing engineer. Extensive Use of computational tools: Matlab sections at end of each chapter show how to implement concepts from the chapter Frees the student from the drudgery of mundane calculations and allows him to consider more subtle aspects of control system analysis and design An engineering approach to digital controls: emphasis throughout the book is on design of control systems. Mathematics is used to help explain concepts, but throughout the text discussion is tied to design and implementation. For example coverage of analog controls in chapter 5 is not simply a review, but is used to show how analog control systems map to digital control systems Review of Background Material: contains review material to aid understanding of digital control analysis and design. Examples include discussion of discrete-time systems in time domain and frequency domain (reviewed from linear systems course) and root locus design in s-domain and z-domain (reviewed from feedback control course) Inclusion of Advanced Topics In addition to the basic topics required for a one semester senior/graduate class, the text includes some advanced material to make it suitable for an introductory graduate level class or for two quarters at the senior/graduate level. Examples of optional topics are state-space methods, which may receive brief coverage in a one semester course, and nonlinear discrete-time systems Minimal Mathematics Prerequisites The mathematics background required for understanding most of the book is based on what can be reasonably expected from the average electrical, chemical or mechanical engineering senior. This background includes three semesters of calculus, differential equations and basic linear algebra. Some texts on digital control require more

Digital controllers are part of nearly all modern personal, industrial, and transportation systems. Every senior or graduate student of electrical, chemical or mechanical engineering should therefore be familiar with the basic theory of digital controllers. This new text covers the fundamental principles and applications of digital control engineering, with emphasis on engineering design. Fadali and Visioli cover analysis and design of digitally controlled systems and describe applications of digital controls in a wide range of fields. With worked examples and Matlab applications in every chapter and many end-of-chapter assignments, this text provides both theory and practice for those coming to digital control engineering for the first time, whether as a student or practicing engineer. Extensive Use of computational tools: Matlab sections at end of each chapter show how to implement concepts from the chapter Frees the student from the drudgery of mundane calculations and allows him to consider more subtle aspects of control system analysis and design An engineering approach to digital controls: emphasis throughout the book is on design of control systems. Mathematics is used to help explain concepts, but throughout the text discussion is tied to design and implementation. For example coverage of analog controls in chapter 5 is not simply a review, but is used to show how analog control systems map to digital control systems Review of Background Material: contains review material to aid understanding of digital control analysis and design. Examples include discussion of discrete-time systems in time domain and frequency domain (reviewed from linear systems course) and root locus design in s-domain and z-domain (reviewed from feedback control course) Inclusion of Advanced Topics In addition to the basic topics required for a one semester senior/graduate class, the text includes some advanced material to make it suitable for an introductory graduate level class or for two quarters at the senior/graduate level. Examples of optional topics are state-space methods, which may receive brief coverage in a one semester course, and nonlinear discrete-time systems Minimal Mathematics Prerequisites The mathematics background required for understanding most of the book is based on what can be reasonably expected from the average electrical, chemical or mechanical engineering senior. This background includes three semesters of calculus, differential equations and basic linear algebra. Some texts on digital control require more

Growing numbers of engineering graduates are finding employment in the control systems area with applications to manufacturing. To be properly prepared for such positions, it is desirable that the students be exposed to the topics of process control, discrete logic control and the fundamentals of manufacturing. Presently there is no existing textbook and/or reference that combine together process control, discrete logic control and the fundamentals of manufacturing. This is a book that fills that gap. This book integrates together the theory with a number of illustrative examples. Constructive procedures will be given for designing controllers and manufacturing lines, including methods for designing digital controllers, fuzzy logic controllers and adaptive controllers, and methods for the design of the flow of operations in a manufacturing line. One chapter will be devoted to equipment interfacing and computer communications, with the focus on fieldbuses, device drivers and computer networks. There are no existing control-oriented textbooks that bring this material into the picture, although interfacing and communications are becoming a bigger and bigger part of the overall control problem. Covers both analog and digital control using P/PI/PID controllers and discrete logic control using ladder logic diagrams and programmable logic controllers Contains a brief introduction to model predictive control, adaptive control, and neural net control Covers control from the device/process level up to and including the production system level Contains an introduction to manufacturing systems with the emphasis on performance measures, flow-line analysis, and line balancing Contains a chapter on equipment interfacing with a brief introduction on OLE for process control (OPC), the GEM standard, fieldbuses, and Ethernet Material is based on a course with a lab project developed and taught at the Georgia Institute of Technology Coverage is at the introductory level with a minimal amount of background required to read the text

This handbook gives comprehensive coverage of all kinds of industrial control systems to help engineers and researchers correctly and efficiently implement their projects. It is an indispensable guide and references for anyone involved in control, automation, computer networks and robotics in industry and academia alike. Whether you are part of the manufacturing sector, large-scale infrastructure systems, or processing technologies, this book is the key to learning and implementing real time and distributed control applications. It covers working at the device and machine level as well as the wider environments of plant and enterprise. It includes information on sensors and actuators; computer hardware; system interfaces; digital controllers that perform programs and protocols; the embedded applications software; data communications in distributed control systems; and the system routines that make control systems more user-friendly and safe to operate. This handbook is a single source reference in an industry with highly disparate information from myriad sources. Helps engineers and researchers correctly and efficiently implement their projects An indispensable guide and references for anyone involved in control, automation, computer networks and robotics Equally suitable for industry and academia

Real Time Digital Control Applications is a compilation of papers presented at the Symposium on Real-Time Digital Control Applications, sponsored by the International Federation of Automatic Control (IFAC) and the International Federation for Information Processing (IFIP), held in Guadalajara, Mexico. The event is organized to provide developing countries with the opportunity to gain insights -- from the sharing of ideas and experiences of experts from around the world to the rapid growth and development of applications of real-time digital control systems, which is considered as the basis of industrial revolution. The book presents and discusses the various scientific, industrial, and technical applications of real-time digital control systems. Applications in power generation, water, metal processing, cement, food, and manufacturing industries are shown. The text also covers applications in robotics, biomedicine, monitoring and failure detection, fuel optimization and heat control, adaptive process control, modeling, and computer software. Industrial engineers, scientists, economists, computer scientists, robotics experts, planners, and technicians will find this book invaluable.