Injection Molding Reference Guide

This reference guide was originally prepared in 1990 as a convenient pocket sized resource for use in Injection Molding. This information is most useful by personnel who work in the injection molding field including press operators, technicians, engineers, designers, mold builders, etc.There are many reference data tables regarding plastics data, statistical methods, engineering calculations and valuable training for personnel in the IM industry. The book includes basic part design, trig tables, calculations for thermal expansion, thermal exp coeffs, SHCS data, torque specs, shrink data, cooling time equation, mold debug guidelines, melt index data, resin density data, many tables of process guidelines, process development techniques, calculating heat load & water flow requirements, pipe data, conversion factors, transformer & motor current, PM & safety, basic statistics, equip selection guidelines and more.This 4th Edition has been reformatted at 5.5 inches wide x 8.5 inches tall in 2011 for print sales.

Plastics Injection Molding: Scientific Molding, Recommendations, and Best Practices is a user-friendly reference book and training tool, with all the essentials to understand injection molding of plastics. It is a practical guide to refining and controlling the process, increasing robustness and consistency, increasing productivity and profitability, and reducing costs. This book contains structured information on process definitions and parameters, optimization methods, key points, interpretation of data sheets, among other useful recommendations regarding both technology and design. It also provides analysis of process deviation, defects, incidents, etc. as well as a section dedicated to material selection and comparison. It includes a bonus of downloadable Excel spreadsheets for application to scientific molding, process analysis, and optimization. This book is aimed at injection molding technicians, process engineers, quality engineers, mold designers, part designers, simulation engineers, team leaders, plant managers, and those responsible for purchasing plastic materials.

The all-encompassing guide to total quality process control for injection molding In the same simple, easy-to-understand language that marked the first edition, Total Quality Process Control for Injection Molding, Second Edition lays out a successful plan for producing superior plastic parts using high-quality controls. This updated edition is the first of its kind to zero in on every phase of the injection molding process, the most commonly used plastics manufacturing method, with an all-inclusive strategy for excellence. Beginning with sales and marketing, then moving forward to cover finance, purchasing, design, tooling, manufacturing, assembly, decorating, and shipping, the book thoroughly covers each stage to illustrate how elevated standards across individual departments relate to result in the creation of a top-notch product. This Second Edition: Details ways to improve plastic part design and quality Includes material and process control procedures to monitor quality through the entire manufacturing system Offers detailed information on machinery and equipment and the implementation of quality assurance methods—content that is lacking in similar books Provides problem-analysis techniques and troubleshooting procedures Includes updates that cover Six Sigma, ISO 9000, and TS 16949, which are all critical for quality control; computer-guided process control techniques; and lean manufacturing methods With proven ways to problem-solve, increase performance, and ensure customer satis-faction, this valuable guide offers the vital information today's managers need to plan and implement quality process control—and produce plastic parts that not only meet, but surpass expectations.

The IM Troubleshooting Guide was originally prepared in 1996 as a 48 page convenient pocket sized resource for use in Injection Molding. This information is most useful by personnel who work in the injection molding field including press operators, technicians, engineers, etc. This 3rd ED is at 104 pages and includes selected extra pages from other APEBOOKS that are helpful in process set up and troubleshooting.This book includes many useful definitions and tips for troubleshooting molding problems -- both process and tooling related. The book was written based on many years of process engineering. The solutions for correcting process problems are listed in the best order to solve the problem based on factors such as ease & timeliness to perform versus cost to implement and always considering effectiveness to solve problem. It is also useful to identify a common set of definitions for each department to use when discussing these common molding defects. Tips are often provided as to which defects may be process correctable versus those requiring product or mold changes.An introduction to DOE and dimensional nominalization is made, but discussed in greater detail in some of the other booklets written by this author for injection molding ... these are listed later in this book ... a total of six books have been written for injection molding.

Although the basic injection molding technology has not changed much since the publication of the 3rd edition of "Injection Molding Machines", there has been considerable progress in certain process applications that make special demands on machinery and their control functions in particular. The book provides an elegant, succinct description of the injection molding process. By concentrating on a few key parameters, such as pressure, temperature, their rates, and their influence on the properties of moldings, it provides a clear insight into this technology. The subsequent comprehensive presentation of technical data relating to individual machine components and performance is unique and will be especially appreciated by practitioners. Contents: History of Injection Molding Materials for Injection Molding General Design and Function Injection Unit Clamping Unit Drive Unit Control System Efficiency and Energy Consumption Types of Injection Molding Machines - Machines for Special Process Modifications Machine Sizes and Performance Data Accessories

The goal of the book is to assist the designer in the development of parts that are functional, reliable, manufacturable, and aesthetically pleasing. Since injection molding is the most widely used manufacturing process for the production of plastic parts, a full understanding of the integrated design process presented is essential to achieving economic and functional design goals. Features over 425 drawings and photographs.