Ion Beam Induced Defects And Their Effects In Oxide Materials

This book provides an overview of the applications of ion beam techniques in oxide materials. Oxide materials exhibit defect-induced physical properties relevant to applications in sensing, optoelectronics and spintronics. Defects in these oxide materials also lead to magnetism in non-magnetic materials or to a change of magnetic ordering in magnetic materials. Thus, an understanding of defects is of immense importance. To date, ion beam tools are considered the most effective techniques for producing controlled defects in these oxides. This book will detail the ion beam tools utilized for creating defects in oxides.

Defect-Induced Magnetism in Oxide Semiconductors provides an overview of the latest advances in defect engineering to create new magnetic materials and enable new technological applications. First, the book introduces the mechanisms, behavior, and theory of magnetism in oxide semiconductors and reviews the methods of inducing magnetism in these materials. Then, strategies such as pulsed laser deposition and RF sputtering to grow oxide nanostructured materials with induced magnetism are discussed. This is followed by a review of the most relevant postdeposition methods to induce magnetism in oxide semiconductors including annealing, ion irradiation, and ion implantation. Examples of defect-induced magnetism in oxide semiconductors are provided along with selected applications. This book is a suitable reference for academic researchers and practitioners and for people engaged in research and development in the disciplines of materials science and engineering. Reviews the magnetic, electrical, dielectric and optical properties of oxide semiconductors with defect-induced magnetism Discusses growth and post-deposition strategies to grow oxide nanostructured materials such as oxide thin films with defect-induced magnetism Provides examples of materials with defect-induced magnetism such as zinc oxide, cerium dioxide, hafnium dioxide, and more

Calcium-based natural minerals are important for a wide range of applications. Though these materials are available in nature, researchers are working toward developing them in the laboratory. Calcium-Based Materials: Processing, Characterization, and Applications introduces the possibility of designing these materials for particular applications. Introduces a variety of calcium-based materials and discusses synthesis, growth, and stability Provides in-depth coverage of calcium carbonate Discusses applications of calcium-based minerals in different fields Includes details on synchrotron X-ray tools for case minerals This comprehensive text is aimed at researchers in materials science, engineering, and bioengineering.

Metal Oxide Defects: Fundamentals, Design, Development and Applications provides a broad perspective on the development of advanced experimental techniques to study defects and their chemical activity and catalytic reactivity in various metal oxides. This book highlights advances in characterization and analytical techniques to achieve better understanding of a wide range of defects, most importantly, state-of-the-art methodologies for controlling defects. The book provides readers with pathways to apply basic principles and interpret the behavior of metal oxides. After reviewing characterization and analytical techniques, the book focuses on the relationship of defects to the properties and performance of metal oxides. Finally, there is a review of the methods to control defects and the applications of defect engineering for the design of metal oxides for applications in optoelectronics, energy, sensing, and more. This book is a key reference for materials scientists and engineers, chemists, and physicists. Reviews advances in characterization and analytical techniques to understand the behavior of defects in metal oxide materials Introduces defect engineering applied to the design of metal oxide materials with desirable properties Discusses applications of defect engineering to enhance the performance of materials for a wide range of applications, with an emphasis on optoelectronics

Many books are available that detail the basic principles of the different methods of surface characterization. On the other hand, the scientific literature provides a resource of how individual pieces of research are conducted by particular labo- tories. Between these two extremes the literature is thin but it is here that the present volume comfortably sits. Both the newcomer and the more mature scientist will find in these chapters a wealth of detail as well as advice and general guidance of the principal phenomena relevant to the study of real samples. In the analysis of samples, practical analysts have fairly simple models of how everything works. Superimposed on this ideal world is an understanding of how the parameters of the measurement method, the instrumentation, and the char- teristics of the sample distort this ideal world into something less precise, less controlled, and less understood. The guidance given in these chapters allows the scientist to understand how to obtain the most precise and understood measu- ments that are currently possible and, where there are inevitable problems, to have clear guidance as the extent of the problem and its likely behavior.

This conference consisted of 15 oral sessions, including three plenary papers covering areas of general interest, 22 specialist invited papers and 51 contributed presentations as well as three poster sessions. There were several scientific highlights covering a diverse spectrum of materials and ion beam processing methods. These included a wide range of conventional and novel applications such as: optical displays and opto-electronics, motor vehicle and tooling parts, coatings tailored for desired properties, studies of fundamental defect properties, the production of novel (often buried) compounds, and treating biomedical materials. The study of nanocrystals produced by ion implantation in a range of host matrices, particularly for opto-electronics applications, was one especially new and exciting development. Despite several decades of study, major progress was reported at the conference in understanding defect evolution in semiconductors and the role of defects in transient impurity diffusion. The use of implantation to tune or isolate optical devices and in forming optically active centres and waveguides in semiconductors, polymers and oxide ceramics was a major focus of several presentations at the conference. The formation of hard coatings by ion assisted deposition or direct implantation was also an area which showed much recent progress. Ion beam techniques had also developed apace, particularly those based on plasma immersion ion implantation or alternative techniques for large area surface treatment. Finally, the use of ion beams for the direct treatment of cancerous tissue was a particularly novel and interesting application of ion beams.

This thesis investigates the behavior of two candidate materials (a-SiO2 and MgO) for applications in fusion (e.g., the International Thermonuclear Experimental Reactor ITER) and Generation IV fission reactors. Both parts of the thesis – the development of the ionoluminescence technique and the study of the ion-irradiation effects on both materials – are highly relevant for the fields of the ion-beam analysis techniques and irradiation damage in materials. The research presented determines the microstructural changes at different length scales in these materials under ion irradiation. In particular, it studies the effect of the irradiation temperature using several advanced characterization techniques. It also provides much-needed insights into the use of these materials at elevated temperatures. Further, it discusses the development of the ion-beam-induced luminescence technique in different research facilities around the globe, a powerful in situ spectroscopic characterization method that until now was little known. Thanks to its relevance, rigorosity and quality, this thesis has received twoprestigious awards in Spain and France.

Researchers and engineers working in nuclear laboratories, nuclear electric plants, and elsewhere in the radiochemical industries need a comprehensive handbook describing all possible radiation-chemistry interactions between irradiation and materials, the preparation of materials under distinct radiation types, the possibility of damage of material