Iutam Symposium On Variable Density Low Speed Turbulent Flows

The General Assembly of the International Union of Theoretical and Applied Mechanics in its meeting on August 28, 1994, selected for 1996 only four Mechanics Symposia, of which ours is the only one related to Fluid Mechanics: Variable Density Low Speed Turbulent Flows. This IUTAM Symposium, organized by the Institut de Recherche sur les Phenomenes Hors Equilibre (Marseille), is the logical continuation of the meetings previously organized or co-organized - on the French or European level, such as Euromech 237, Marseille, 1988 - by the same research group ofMarseille. This meeting focused specifically on the structure of turbulent flows in which density varies strongly : the effect of this variation on the velocity and scalar fields is in no sense negligible. We were mainly concerned with low-speed flows subjected to strong local changes of density as a consequence of heat or mass transfer or of chemical reactions. Compressible turbulent flows - such a!" supersonic ones - were also considered in order to underline their similarities to and their differences from low-speed variable density flows.

This volume presents selected papers from the IUTAM Symposium on Reynolds Number Scaling in Turbulent Flow, convened in Princeton, NJ, USA, September I1-13, 2002. The behavior ofturbulence at high Reynolds number is interesting from a fundamental point of view, in that most theories of turbulence make very specific predictions in the limit of infinite Reynolds number. From a more practical point of view, there exist many applications that involve turbulent flow where the Reynolds numbers are extremely large. For example, large vehicles such as submarines and commercial transports operate at Reynolds 9 numbers based on length ofthe order oft0 , and industrial pipe flows cover a 7 very wide range of Reynolds numbers up to 10 • Many very important applications of high Reynolds number flow pertain to atmospheric and other geophysical flows where extremely high Reynolds numbers are the rule rather than the exception, and the understanding of climate changes and the prediction of destructive weather effects hinges to some extent on our appreciation ofhigh-Reynolds number turbulence behavior. The important effects of Reynolds number on turbulence has received a great deal of recent attention. The objective of the Symposium was to bring together many of the world's experts in this area to appraise the new experimental results, discuss new scaling laws and turbulence models, and to enhance our mutual understanding of turbulence.

In various branches of fluid mechanics, our understanding is inhibited by the presence of turbulence. Although many experimental and theoretical studies have significantly helped to increase our physical understanding, a comp- hensive and predictive theory of turbulent flows has not yet been established. Therefore, the prediction of turbulent flow relies heavily on simulation stra- gies. The development of reliable methods for turbulent flow computation will have a significant impact on a variety of technological advancements. These range from aircraft and car design, to turbomachinery, combustors, and process engineering. Moreover, simulation approaches are important in materials - sign, prediction of biologically relevant flows, and also significantly contribute to the understanding of environmental processes including weather and climate forecasting. The material that is compiled in this book presents a coherent account of contemporary computational approaches for turbulent flows. It aims to p- vide the reader with information about the current state of the art as well as to stimulate directions for future research and development. The book puts part- ular emphasis on computational methods for incompressible and compressible turbulent flows as well as on methods for analysing and quantifying nume- cal errors in turbulent flow computations. In addition, it presents turbulence modelling approaches in the context of large eddy simulation, and unfolds the challenges in the field of simulations for multiphase flows and computational fluid dynamics (CFD) of engineering flows in complex geometries. Apart from reviewing main research developments, new material is also included in many of the chapters.

Free surface flows arise in the natural world, physical and biological sciences and in some areas of modern technology and engineering. Exam ples include the breaking of sea waves on a harbour wall, the transport of sloshing fluids in partly filled containers, and the design of micronozzles for high speed ink-jet printing. Apart from the intrinsic mathematical challenge in describing and solving the governing equations, there are usually important environmental, safety and engineering features which need to be analysed and controlled. A rich variety of techniques has been developed over the past two decades to facilitate this analysis; singular perturbations, dynamical systems, and the development of sophisticated numerical codes. The extreme and sometimes violent nature of some free surface flows taxes these methods to the limit. The work presented at the symposium addressed these limits and can be loosely classified into four areas: (i) Axisymmetric free surface flows. There are a variety of problems in the printing, glass, fertiliser and fine chemical industries in which threads of fluid are made and controlled. Presentations were made in the areas of pinch-off for inviscid and viscous threads of fluid, recoil effects after droplet formation and the control of instability by forced vibration. (ii) Dynamic wetting. The motion of three phase contact lines, which are formed at the junction between two fluids and a solid, plays an important role in fluid mechanics.

The book provides a broad overview of the full spectrum of state-of-the-art computational activities in multiphase flow as presented by top practitioners in the field. It starts with well-established approaches and builds up to newer methods. These methods are illustrated with applications to a broad spectrum of problems involving particle dispersion and deposition, turbulence modulation, environmental flows, fluidized beds, bubbly flows, and many others.

The active field of multi-phase flow has undergone fundamental changes in the last decade. Many salient complex interfacial dynamics of such flows are now understood at a basic level with precise mathematical and quantitative characterization. This is quite a departure from the traditional empirical approach. At an IUTAM Symposium at Notre Dame, in 1999, some of the leading researchers in the field gathered to review the progress thus far and to contemplate future directions. Their reports are summarized in this Proceedings. Topics covered include solitary wave dynamics on viscous film flows, sheet formation and drop entrainment in stratified flow, wetting and dewetting dynamics, self-similar drop formation dynamics, waves in bubbly and suspension flow, and bubble dynamics. It is a unique and essential reference for applied mathematicians, physicists, research engineers, and graduate students to keep abreast of the latest theoretical and numerical developments that promise to transform multi-phase flow research.

This volume contains the papers presented at the IUTAM Symposium on Geometry and Statistics of Turbulence, held in November 1999, at the Shonan International Village Center, Hayama (Kanagawa-ken), Japan. The Symposium was proposed in 1996, aiming at organizing concen trated discussions on current understanding of fluid turbulence with empha sis on the statistics and the underlying geometric structures. The decision of the General Assembly of International Union of Theoretical and Applied Mechanics (IUTAM) to accept the proposal was greeted with enthusiasm. Turbulence is often characterized as having the properties of mixing, inter mittency, non-Gaussian statistics, and so on. Interest is growing recently in how these properties are related to formation and evolution of struc tures. Note that the intermittency is meant for passive scalars as well as for turbulence velocity or rate of dissipation. There were eighty-eight participants in the Symposium. They came from thirteen countries, and fifty-seven papers were presented. The presenta tions comprised a wide variety of fundamental subjects of mathematics, statistical analyses, physical models as well as engineering applications. Among the subjects discussed are (a) Degree of self-similarity in cascade, (b) Fine-scale structures and degree of Markovian property in turbulence, (c) Dynamics of vorticity and rates of strain, (d) Statistics associated with vortex structures, (e) Topology, structures and statistics of passive scalar advection, (f) Partial differential equations governing PDFs of velocity in crements, (g) Thermal turbulences, (h) Channel and pipe flow turbulences, and others.

An exciting new direction in hydrodynamic stability theory and the transition to turbulence is concerned with the role of disconnected states or finite amplitude solutions in the evolution of disorder in fluid flows. This volume contains refereed papers presented at the IUTAM/LMS sponsored symposium on "Non-Uniqueness of Solutions to the Navier-Stokes equations and their Connection with Laminar-Turbulent Transition" held in Bristol 2004. Theoreticians and experimentalists gathered to discuss developments in understanding both the onset and collapse of disordered motion in shear flows such as those found in pipes and channels. The central objective of the symposium was to discuss the increasing amount of experimental and numerical evidence for finite amplitude solutions to the Navier-Stokes equations and to set the work into a modern theoretical context. The participants included many of the leading authorities in the subject and this volume captures much of the flavour of the resulting stimulating and lively discussions.