Laundromat Operations Maintenance Manual

Owning a Laundromat is a great business and can be very profitable. It is an all-cash business and recession-proof. A self-service laundromat runs all by itself. All you need to do is collect the cash and wipe down the machines. This book will tell you how to run a laundromat with no prior experience. The skills needed to run and maintain a laundromat are not rocket science and don't need expensive equipment: just common sense and logic. I will tell you how it is, the good, the bad and the ugly—everything you need to know to get started.

Owning a Laundromat is a great business and can be very profitable. It is an all-cash business and recession-proof. A self-service laundromat runs all by itself. All you need to do is collect the cash and wipe down the machines. This book will tell you how to run a laundromat with no prior experience. The skills needed to run and maintain a laundromat are not rocket science and don't need expensive equipment: just common sense and logic. I will tell you how it is, the good, the bad and the ugly--everything you need to know to get started.

Owning a coin-operated Laundromat is a great business and can be very profitable. But, unless you have all new equipment, it can quickly nickel and dime you into making a loss and going out of business, losing your investment. The skills needed to run and maintain a laundromat are not rocket science and don't need expensive equipment: just common sense and logic. I will assume you have no previous experience in repairing washers, dryers, change machines, etc. I will get you started on a journey to taking charge of your equipment. You will get great satisfaction in making common repairs and keeping your equipment working and earning you money. I do not have any problem paying for repair parts. That is the cost of doing business. What I want to avoid is the $95 service call to troubleshoot a problem by my local appliance repair company, then the part cost being doubled as their mark up and a second $95 service call to install the newly inflated part. Even if you only make one repair, you will save 10 times the cost of this book.

The most comprehensive Anniversary Clock / 400-Day Repair Book. 2023 edition. Hundreds of photos and diagrams.

* Do you own a clock that is special to you that has stopped working, perhaps a gift or a family heirloom? This book is for you.
* Do you like to tinker with mechanical things? This book is for you.
* Have you taken a clock apart but can't get it back together? This book is for you.
* Are you fascinated with clocks, have several you have bought but do not work? This book is for you.

Many times, the problem is simple to correct. Be bold. Take on your project. This book will hold your hand every step of the way and guide you to success. YOU CAN DO IT.

Why does an Anniversary Clock stop Working? Most likely, it is because the suspension spring is broken. I will teach you how to replace it.

Often, the works are dirty, need oiling, or most likely both. When the clock stops, think of it as "the oil light is on." It's a "cry for help." Without oil, the metal parts grind on each other, causing severe wear and damage. Oil also attracts dust, making the oil "gummy" and adding drag to its operation until it can no longer overcome the friction. If a clock is oiled regularly [every three to five years], chances are you will only ever need to re-oil your clock. If the clock is allowed to run until it stops, the only sure way to service it is to remove the works from its case, dismantle the parts, clean, service, and put the movement back together with fresh oil and correct adjustment.

The most comprehensive Grandfather Clock Repair Book. Brand New for 2023. Perfect for Grandfather clock owners or professional Clock Repairers. Hundreds of photos and diagrams.

* Do you own a clock that is special to you that has stopped working, perhaps a gift or a family heirloom? This book is for you.
* Do you like to tinker with mechanical things? This book is for you.
* Have you taken a clock apart but can't get it back together? This book is for you.
* Are you fascinated with clocks, have several you have bought but do not work? This book is for you.

Be bold. Take on your project. This book will hold your hand every step of the way and guide you to success. YOU CAN DO IT.

Why does a Grandfather Clock Stop Working? Often, the works are dirty, need oiling, or, most likely, both. When the clock stops, think of it as “the oil light is on”. It’s a “cry for help”. Without oil, the metal parts grind on each other, causing serious wear and damage. Oil also attracts dust which can make the oil “gummy’ and add drag to its operation until it can no longer overcome the friction. If a clock is oiled regularly [every three to five years], chances are you will only ever need to re-oil your clock. If the clock is allowed to run until it stops, the only sure way to service it is to remove the works from its case, dismantle the parts, clean, service, and put the movement back together with fresh oil and correct adjustment.

This book will teach you how to do all this.

This 2023 Edition is written especially for the Amateur or Professional clock repairer. The only Clock Repair Book that you need using Best Practices. Everything you need to know when Repairing Mechanical Clocks. The most comprehensive, up-to-date clock repair manual available today. Over 383 pages include hundreds of photos and diagrams. A full explanation of dismantling and putting a clock back together CORRECTLY. A full explanation of routine repairs like bushing, pivoting and oiling. A full explanation of all kinds of repairs needed to get a clock running again. Includes Wall Clocks, Mantel Clocks, Regulators Clocks, Cuckoo Clocks, Anniversary Clocks, Grandfather Clocks, Atmos Clocks, Striking and Chiming Clocks, Turret Clocks, Wooden Movement Clocks, and many others.

The thought of Mold in you home terrifies many people. And rightly so. Some Molds are very harmful. The first instinct is to call a professional mold inspector who will likely charge hundreds of dollars to perform an inspection you can do yourself. In fact, the chances are you can and will do a better job. Inspectors want to get in, get out, and get paid. You have more time, more opportunity, and more at stake to poke into every corner and know the history. Be more thorough. A mold inspector will likely recommend professional remediation. That's a big word that will cost Big money. Most likely, you will be able to do most or all the work.

Learn Handbells from scratch or become a better Ringer.

This is the completely revised 2023 "Handbell Ringers Bible". I listened to all your comments and have made this even more comprehensive and easier to learn from.

A set of handbells creates ONE musical instrument. They are always ‘in tune’ and most ringers play only two bells plus their accidental, making it one of the easiest musical instruments to learn and a lot of fun to play. Having said that, to play any instrument well, you need to study and practice.

You don’t need to be a musician to begin to play bells but you will be a musician once you have mastered the instrument and its techniques. If you can count to four and know your left from your right, you have the necessary qualifications. You don’t need a deep understanding of music theory. I have selected the parts of music that you do need, making it as simple as possible.

It is all too common for new handbell ringers to be thrown in at the deep end with just a short explanation of how to ring the bell, and off they go playing in an existing handbell choir. I have created this Method Book, full explanation of all the terms and techniques, training videos as well as handbell music notation to make learning handbells more structured and informative.