Microbial Contamination Control In Parenteral Manufacturing

This reference surveys emerging trends, concepts, and procedures used in the characterization and control of contaminants; the sterile production of traditional drugs and biologics; the design, construction, and validation of new parenteral facilities; and the monitoring of clean environments-vividly illustrating the routes by which products, proce

This reference surveys emerging trends, concepts, and procedures used in the characterization and control of contaminants; the sterile production of traditional drugs and biologics; the design, construction, and validation of new parenteral facilities; and the monitoring of clean environments-vividly illustrating the routes by which products, processes, and manufacturing settings become contaminated through contact with the air, water, raw materials, and the actions of personnel, as well as the current methods necessary to successfully preclude contamination.

Contamination control in pharmaceutical clean rooms has developed from a jumble of science and engineering, knowledge of what has worked well or badly in the past, dependent upon the technology available at the time the clean room was built and subsequent technological developments. Surrounding it all is a blanket of regulations. Taking a multidisc

This authoritative reference presents an up-to-date review of the testing methods, emerging technologies, and analytical systems and procedures used to prevent the microbial contamination of pharmaceutical processes, products, and environments. It identifies new tools for sample analysis and evaluation and the impact of these advancements on the continuous supply and manufacturing of pharmaceutical products. With more than 100 tables and 430 current references, the book contains a detailed analysis of microbial contamination recalls for nonsterile and sterile pharmaceutical products, demonstrating the distribution of microorganisms worldwide and the identification by geographical regions.

Biocontamination Control for Pharmaceuticals and Healthcare outlines a biocontamination strategy that tracks bio-burden control and reduction at each transition in classified areas of a facility. The first edition of the book covered many of the aspects of the strategy, but the new official guidance signals that a roadmap is required to fully comply with its requirements. Completely updated with the newest version of the EU-GPM (EN17141) the new edition expands the coverage of quality risk management and new complete examples to help professionals bridge the gap between regulation and implementation. Biocontamination Control for Pharmaceuticals and Healthcare offers professionals in pharma quality control and related areas guidance on building a complete biocontamination strategy. Includes the most current regulations Contains three new chapters, including Application of Quality Risk Management and its Application in Biocontamination Control, Designing an Environmental Monitoring Programme, and Synthesis: An Anatomy of a Contamination Control Strategy Offers practical guidance on building a complete biocontamination strategy

This authoritative reference presents an up-to-date review of the testing methods, emerging technologies, and analytical systems and procedures used to prevent the microbial contamination of pharmaceutical processes, products, and environments. It identifies new tools for sample analysis and evaluation and the impact of these advancements on the continuous supply and manufacturing of pharmaceutical products. With more than 100 tables and 430 current references, the book contains a detailed analysis of microbial contamination recalls for nonsterile and sterile pharmaceutical products, demonstrating the distribution of microorganisms worldwide and the identification by geographical regions.

Microbiological matters continue to exercise considerable influence on product quality. In both the pharmaceutical and medical device industries, products of greater sophistication, along with evolving regulatory requirements, are elevating the challenges related to maintaining microbiological integrity. Updated to reflect technological and regulatory changes, the Guide to Microbiological Control in Pharmaceuticals and Medical Devices, Second Edition covers thoseprincipal aspects of microbiology that arerelevant to the preformulation, formulation, manufacturing, and license application stages involved with the production of pharmaceuticals and medical devices. In recognition of the diverse disciplines involved in pharmaceutical and medical device production, this work provides a brief introduction to microbiology geared towards the nonmicrobiologist. Covering good manufacturing practice in the control of contamination, the text explores quality control, the preservation of formulations, and principles of sterilization, including microbiological-specific considerations for biotechnological products and other medical devices. It also provides additional materials on package integrity and contamination risks in clean rooms. The editors have produced a companion text, the Handbook of Microbiological Quality Control in Pharmaceuticals and Medical Devices (see reverse), which when paired with the Guide offers a complete theoretical and practical treatment of microbiological control. This book provides a comprehensive distillation of information concerning methodology and regulations that would otherwise remain scattered throughout the literature. It allows scientists from many fields to address potential problems in advance and implement suitable strategies at the earliest stages of development.

Relying on practical examples from the authors’ experience, this book provides a thorough and modern approach to controlling and monitoring microbial contaminations during the manufacturing of non-sterile pharmaceuticals. Offers a comprehensive guidance for non-sterile pharmaceuticals microbiological QA/QC Presents the latest developments in both regulatory expectations and technical advancements Provides guidance on statistical tools for risk assessment and trending of microbiological data Describes strategy and practical examples from the authors’ experience in globalized pharmaceutical companies and expert networks Offers a comprehensive guidance for non-sterile pharmaceuticals microbiological QA/QC Presents the latest developments in both regulatory expectations and technical advancements Provides guidance on statistical tools for risk assessment and trending of microbiological data Describes strategy and practical examples from the authors’ experience in globalized pharmaceutical companies and expert networks