Natural Gas Conversion Viii

This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 8th Natural gas Conversion Symposium held in Natal-Brazil, May 27-31, 2007. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings. The manuscripts have been divided into eight different topics, Industrial Processes, Economics, Technology Demonstration and Commercial Activities;, Production of Hydrogen from Methane, Methanol, and Other Sources; Production of Synthesis; Fischer-Tropsch Synthesis of Hydrocarbons; From Synthesis Gas to; Catalytic Combustion; From Natural Gas to Chemicals; Light Hydrocarbons; and Production and Conversion. These are the most interesting subjects in the utilization of natural gas with recent scientific innovation and technological advances. The book is of interest to all students and researchers active in utilization of natural gas. * Research comes from the most important industries and research centres in the field * Features new studies from all around the world * Important for consulting and updating research and development data

This Symposium provided the opportunity to review progress after more than 10 years of research and development in the field of natural gas conversion. Oxidative coupling of methane as a route to higher value fuels or feedstock was a major part of the program. The advances in understanding of reaction mechanisms and catalyst structure were discussed in a Plenary paper and in many of the contributed papers. The homogeneous gas phase chemistry involved in methane oxidation is relevant not only to oxidative coupling but also to synthesis gas and methanol production via partial oxidation. This field is reviewed in a Plenary paper and contributed papers describe developments in catalysts and technology for partial oxidation to synthesis gas and to methanol. An alternative route to synthesis gas from methane currently receiving attention is carbon dioxide reforming. This technology is reviewed in a Plenary paper and recent advances are described in contributed papers. The first detailed account of the Shell SMDS Fischer-Tropsch process for production of transport fuels from natural gas recently commercialised in Malaysia is given in this book. Papers discuss structural aspects of Fischer-Tropsch catalysts, modifications of Fischer-Tropsch catalysts to produce light olefins, and the possibilities of operating a Fischer-Tropsch process off-shore. Methanol as an intermediate in natural gas conversion continues to attract attention, and methanol synthesis and conversion are discussed in contributed papers. The possibilities of finding new uses for methane are treated in a Plenary paper and arguments for using methane as a fuel rather than a feedstock are also presented. Among the new uses of methane considered are the generation of electricity in fuel cells and the use of methane as a reductant for NOx emissions. The papers will be of interest to scientists and engineers working in the field of gas conversion, transportation fuels, primary petrochemicals and catalysis.

This book discusses effective and alternative uses for natural gas (NG) and highlights the utilization of NG in the field of methane activation and chemical production. It details the techniques used during the reforming process of petrochemical and bio-derived fuels and it presents cutting-edge research that describes the utilization of NG that enables it to be more cost-effective and eliminate the expensive greenhouse gas emitting process of hydrogen production. The book addresses three major topics: NG use in upstream heavy oil and bitumen upgrading, NG and its use in downstream oil refining through co-aromatization of various feeds in the petrochemical industry, and NG use in the upgrading of bio-derived fuels and discusses alternative uses of NG. In-depth chapters demonstrate uses for NG beyond heating homes, through catalysis and in-situ hydrogen donation, and its potential applications for the petrochemical and biofuel industries.

These proceedings reflect the extensive fundamental and applied research efforts that are currently being made on the conversion of gas, in particular on the direct conversion of methane. The Symposium in Oslo focused on the following topics: Direct conversion of methane, Fischer-Tropsch chemistry, methanol conversion and natural gas conversion processes. The main aim was to present the state-of-the-art and progress currently being made within each of these areas. The book contains the papers presented and includes plenary lectures, short communications and posters. The papers will be of interest to scientists and engineers working in the field of gas conversion, transportation fuels, primary petrochemicals and catalysis.

CONVERTING POWER INTO CHEMICALS AND FUELS Understand the pivotal role that the petrochemical industry will play in the energy transition by integrating renewable or low-carbon alternatives Power into Chemicals and Fuels stresses the versatility of hydrogen as an enabler of the renewable energy system, an energy vector that can be transported and stored, and a fuel for the transportation sector, heating of buildings and providing heat and feedstock to industry. It can reduce both carbon and local emissions, increase energy security and strengthen the economy, as well as support the deployment of renewable power generation such as wind, solar, nuclear and hydro. With a focus on power-to-X technologies, this book discusses the production of basic petrochemicals in such a way as to minimize the carbon footprint and develop procedures that save energy or use energy from renewable sources. Various different power-to-X system configurations are introduced with discussions on their performance, environmental impact, and cost. Technologies for sustainable hydrogen production are covered, focusing on water electrolysis using renewable energy as well as consideration of the remaining challenges for large scale production and integration with other technologies. Power into Chemicals and Fuels readers will also find: Discussion of recent advances in power-into-x technologies for the production of ethylene, propylene, formic acid, and more Coverage of every stage in the power-into-x process, from power generation to upgrading the final product Thermodynamic, technoeconomic, and life cycle assessment analyses of each major process Power into Chemicals and Fuels is a valuable resource for scientists and engineers working in the petrochemicals and hydrocarbons industries, as well as for all industry professionals in these and related fields.

A comprehensive textbook on petrochemical conversion processes for petroleum and natural gas fractions as produced by refinery operations This innovative textbook provides essential links between the chemical sciences and chemical technology, between petrochemistry and hydrocarbon technology. The book brings alive key concepts forming the basis of chemical technology and presents a solid background for innovative process development. In all chapters, the processes described are accompanied by simplified flow schemes, encouraging students to think in terms of conceptual process designs. Petrochemistry: Petrochemical Processing, Hydrocarbon Technology and Green Engineering introduces students to a variety of topics related to the petrochemical industry, hydrocarbon processing, fossil fuel resources, as well as fuels and chemicals conversion. The first chapter covers the fundamentals and principals for designing several of the processes in the book, including discussions on thermodynamics, chemical kinetics, reactor calculations, and industrial catalysts. The following chapters address recent advances in hydrocarbon technology, energy technology, and sources of hydrocarbons. The book then goes on to discuss the petrochemical industry based on four basic pillars, all derived from petroleum and natural gas: Production of lower alkenes; other sources of lower alkenes; petrochemicals from C2-C3 alkenes Production of BTX aromatics; chemicals from BTX aromatics C1 technology Diversification of petrochemicals The growing importance of sustainable technology, process intensification and addressing greenhouse gas emissions is reflected throughout the book. Written for advanced students working in the areas of petrochemistry, hydrocarbon technology, natural gas, energy materials and technologies, alternative fuels, and recycling technologies the book is also a valuable reference for industrial practitioners in the oil and gas industry.

Fuel cells are attractive electrochemical energy converters featuring potentially very high thermodynamic efficiency factors. The focus of this volume of Advances in Chemical Engineering is on quantitative approaches, particularly based on chemical engineering principles, to analyze, control and optimize the steady state and dynamic behavior of low and high temperature fuel cells (PEMFC, DMFC, SOFC) to be applied in mobile and stationary systems. Updates and informs the reader on the latest research findings using original reviews Written by leading industry experts and scholars Reviews and analyzes developments in the field