Optimal Design And Control Of Multibody Systems

This book presents the proceedings of the IUTAM Symposium on Optimal Design and Control of Multibody Systems 2022, covering research papers in the realm of optimal structural and control design for both rigid and flexible multibody systems. It delves into the application of the adjoint approach, enabling the undertaking of extensive topology optimizations to unearth body designs that excel under time- and design-dependent loads. Encompassing presentations on (adjoint) sensitivity analysis, structural optimization, optimal control, robust optimization, artificial intelligence, machine learning, and computational methods and software development, the IUTAM Symposium 2022 showcased the latest breakthroughs and innovative methodologies. This book presents 14 meticulously peer-reviewed proceedings papers from the event, evenly split between the Optimal Design and Optimal Control panels.

Underactuated multibody systems are intriguing mechatronic systems, as they posses fewer control inputs than degrees of freedom. Some examples are modern light-weight flexible robots and articulated manipulators with passive joints. This book investigates such underactuated multibody systems from an integrated perspective. This includes all major steps from the modeling of rigid and flexible multibody systems, through nonlinear control theory, to optimal system design. The underlying theories and techniques from these different fields are presented using a self-contained and unified approach and notation system. Subsequently, the book focuses on applications to large multibody systems with multiple degrees of freedom, which require a combination of symbolical and numerical procedures. Finally, an integrated, optimization-based design procedure is proposed, whereby both structural and control design are considered concurrently. Each chapter is supplemented by illustrated examples.

Multibody systems are used extensively in the investigation of mechanical systems including structural and non-structural applications. It can be argued that among all the areas in solid mechanics the methodologies and applications associated to multibody dynamics are those that provide an ideal framework to aggregate d- ferent disciplines. This idea is clearly reflected, e. g. , in the multidisciplinary applications in biomechanics that use multibody dynamics to describe the motion of the biological entities, in finite elements where multibody dynamics provides - werful tools to describe large motion and kinematic restrictions between system components, in system control where the methodologies used in multibody dynamics are the prime form of describing the systems under analysis, or even in many - plications that involve fluid-structure interaction or aero elasticity. The development of industrial products or the development of analysis tools, using multibody dynamics methodologies, requires that the final result of the devel- ments are the best possible within some limitations, i. e. , they must be optimal. Furthermore, the performance of the developed systems must either be relatively insensitive to some of their design parameters or be sensitive in a controlled manner to other variables. Therefore, the sensitivity analysis of such systems is fundamental to support the decision making process. This book presents a broad range of tools for designing mechanical systems ranging from the kinematic and dynamic analysis of rigid and flexible multibody systems to their advanced optimization.

Robust Industrial Control Systems: Optimal Design Approach for Polynomial Systems presents a comprehensive introduction to the use of frequency domain and polynomial system design techniques for a range of industrial control and signal processing applications. The solution of stochastic and robust optimal control problems is considered, building up from single-input problems and gradually developing the results for multivariable design of the later chapters. In addition to cataloguing many of the results in polynomial systems needed to calculate industrial controllers and filters, basic design procedures are also introduced which enable cost functions and system descriptions to be specified in order to satisfy industrial requirements. Providing a range of solutions to control and signal processing problems, this book: * Presents a comprehensive introduction to the polynomial systems approach for the solution of H_2 and H_infinity optimal control problems. * Develops robust control design procedures using frequency domain methods. * Demonstrates design examples for gas turbines, marine systems, metal processing, flight control, wind turbines, process control and manufacturing systems. * Includes the analysis of multi-degrees of freedom controllers and the computation of restricted structure controllers that are simple to implement. * Considers time-varying control and signal processing problems. * Addresses the control of non-linear processes using both multiple model concepts and new optimal control solutions. Robust Industrial Control Systems: Optimal Design Approach for Polynomial Systems is essential reading for professional engineers requiring an introduction to optimal control theory and insights into its use in the design of real industrial processes. Students and researchers in the field will also find it an excellent reference tool.

This book contains an edited versIOn of lectures presented at the NATO ADVANCED STUDY INSTITUTE on VIRTUAL NONLINEAR MUL TIBODY SYSTEMS which was held in Prague, Czech Republic, from 23 June to 3 July 2002. It was organized by the Department of Mechanics, Faculty of Mechanical Engineering, Czech Technical University in Prague, in cooperation with the Institute B of Mechanics, University of Stuttgart, Germany. The ADVANCED STUDY INSTITUTE addressed the state of the art in multibody dynamics placing special emphasis on nonlinear systems, virtual reality, and control design as required in mechatronics and its corresponding applications. Eighty-six participants from twenty-two countries representing academia, industry, government and research institutions attended the meeting. The high qualification of the participants contributed greatly to the success of the ADVANCED STUDY INSTITUTE in that it promoted the exchange of experience between leading scientists and young scholars, and encouraged discussions to generate new ideas and to define directions of research and future developments. The full program of the ADVANCED STUDY INSTITUTE included also contributed presentations made by participants where different topics were explored, among them: Such topics include: nonholonomic systems; flexible multibody systems; contact, impact and collision; numerical methods of differential-algebraical equations; simulation approaches; virtual modelling; mechatronic design; control; biomechanics; space structures and vehicle dynamics. These presentations have been reviewed and a selection will be published in this volume, and in special issues of the journals Multibody System Dynamics and Mechanics of Structures and Machines.

This book contains the edited version of the lectures presented at the NATO ADVANCED STUDY INSTITUTE on "COMPUTER AIDED ANALYSIS OF RIGID AND FLEXIBLE MECHANICAL SYSTEMS". held in Troia. Portugal. from the 27 June to 9 July. 1993. and organized by the Instituto de Engenharia Mecanica. Instituto Superior Tecnico. This ASI addressed the state-of-art in the field of multibody dynamics. which is now a well developed subject with a great variety of formalisms. methods and principles. Ninety five participants. from twenty countries. representing academia. industry. government and research institutions attended this Institute. This contributed greatly to the success of the Institute since it encouraged the interchange of experiences between leading scientists and young scholars and promoted discussions that helped to generate new ideas and to defme directions of research and future developments. The full program of the Institute included also contributed presentations made by participants where different topics have been explored. Such topics include: formulations and numerical aspects in rigid and flexible mechanical systems; object-oriented paradigms; optimal design and synthesis; robotics; kinematics; path planning; control; impact dynamics; and several application oriented developments in weapon systems. vehicles and crash worthiness. These papers have been revised and will be published by Kluwer in a special issue of the Journal of Nonlinear Dynamics and in a forthcoming companion book. This book brings together. in a tutorial and review manner. a comprehensive summary of current work and is therefore suitable for a wide range of interests.

The book is intended for all those who are interested in application problems related to dynamical systems. It provides an overview of recent findings on dynamical systems in the broadest sense. Divided into 46 contributed chapters, it addresses a diverse range of problems. The issues discussed include: Finite Element Analysis of optomechatronic choppers with rotational shafts; computational based constrained dynamics generation for a model of a crane with compliant support; model of a kinetic energy recuperation system for city buses; energy accumulation in mechanical resonance; hysteretic properties of shell dampers; modeling a water hammer with quasi-steady and unsteady friction in viscoelastic conduits; application of time-frequency methods for the assessment of gas metal arc welding conditions; non-linear modeling of the human body’s dynamic load; experimental evaluation of mathematical and artificial neural network modeling for energy storage systems; interaction of bridge cables and wake in vortex-induced vibrations; and the Sommerfeld effect in a single DOF spring-mass-damper system with non-ideal excitation.

This volume provides the international multibody dynamics community with an up-to-date view on the state of the art in this rapidly growing field of research which now plays a central role in the modeling, analysis, simulation and optimization of mechanical systems in a variety of fields and for a wide range of industrial applications. This book contains selected contributions delivered at the ECCOMAS Thematic Conference on Multibody Dynamics, which was held in Brussels, Belgium and organized by the Université catholique de Louvain, from 4th to 7th July 2011. Each paper reflects the State-of-Art in the application of Multibody Dynamics to different areas of engineering. They are enlarged and revised versions of the communications, which were enhanced in terms of self-containment and tutorial quality by the authors. The result is a comprehensive text that constitutes a valuable reference for researchers and design engineers which helps to appraise the potential for the application of multibody dynamics methodologies to a wide range of areas of scientific and engineering relevance.