Precision Sensors Actuators And Systems

Research into and development of high-precision systems, microelectromechanical systems, distributed sensors/actuators, smart structural systems, high-precision controls, etc. have drawn much attention in recent years. These new devices and systems will bring about a new technical revolution in modern industries and impact future human life. This book presents a unique overview of these technologies such as silicon based sensors/actuators and control piezoelectric micro sensors/actuators, micro actuation and control, micro sensor applications in robot control, optical fiber sensors/systems, etc. These are four essential subjects emphasized in the book: 1. Survey of the (current) research and development; 2. Fundamental theories and tools; 3. Practical applications. 4. Outlining future research and development.

Control systems are found in a wide variety of areas, including chemical processing, aerospace, manufacturing, and automotive engineering. Beyond the controller, sensors and actuators are the most important components of the control system, and students, regardless of their chosen engineering field, need to understand the fundamentals of how these

Modeling and Control of Precision Actuators explores new technologies that can ultimately be applied in a myriad of industries. It covers dynamical analysis of precise actuators and strategies of design for various control applications. The book addresses four main schemes: modeling and control of precise actuators; nonlinear control of precise actuators, including sliding mode control and neural network feedback control; fault detection and fault-tolerant control; and advanced air bearing control. It covers application issues in the modeling and control of precise actuators, providing several interesting case studies for more application-oriented readers. Introduces the driving forces behind precise actuators Describes nonlinear dynamics of precise actuators and their mathematical forms, including hysteresis, creep, friction, and force ripples Presents the control strategies for precise actuators based on Preisach model as well as creep dynamics Develops relay feedback techniques for identifying nonlinearities such as friction and force ripples Discusses a MPC approach based on piecewise affine models which emulate the frictional effects in the precise actuator Covers the concepts of air bearing stages with the corresponding control method Provides a set of schemes suitable for fault detection and accommodation control of mechanical systems Emphasizing design theory and control strategies, the book includes simulation and practical examples for each chapter; covers precise actuators such as piezo motors, coil motors, air bearing motors, and linear motors; discusses integration among different technologies; and includes three case studies in real projects. The book concludes by linking design methods and their applications, emphasizing the key issues involved and how to implement the precision motion control tasks in a practical system. It provides a concise and comprehensive source of the state-of-the-art developments and results for modeling and control of precise actuators.

The focus of this book is concerned with the modeling and precise numerical simulation of mechatronic sensors and actuators. These sensors, actuators, and sensor - actuator systems are based on the mutual interaction of the me chanical field with a magnetic, an electrostatic or an electromagnetic field. In many cases the transducer is immersed in an acoustic fluid and the solid-fluid coupling has to be taken into account. Examples are: piezoelectric stack ac tuators for common-rail injection systems, micromachined electrostatic gyro sensors used in stabilizing systems of automobiles or ultrasonic imaging sys tems for medical diagnostics. The modeling of mechatronic sensors and actuators leads to so-called mul tifield problems, which are described by a system of nonlinear partial dif ferential equations. Such systems can not be solved analytically and, thus a numerical calculation scheme has to be applied. The schemes discussed in this book are based on the finite element (FE) method, which is capable of efficiently solving the partial differential equations. The complexity of the simulation of multifield problems consists in the simultaneous computation of the involved single fields as well as in the coupling terms, which intro duce additional nonlinearities. Examples are: moving conductive (electrically charged) body within a magnetic (an electric) field, electromagnetic and/or electrostatic forces.

Safety evaluation by definition involves many complex factors and thus covers a wide range of topics. In order to focus the content of the workshop the subject matter was specific to the state of the art and the recent developments in nonlinear and time-variant methods employing identification procedures. Participants in the workshop represented a wide range of expertise. They were se lected in order to cover the state of the art of knowledge in fault-detection and dam age assessment, system identification, signal processing, mathematical and physical modelling and applications of techniques such as fuzzy logic and neural networks. The emphasis was placed on the exploitation and understanding of nonlinearity arising from structural or material faults. Figure 1 indicates the range of topics covered in the workshop. Since no unique or general approach yet exists for treating nonlinearity in the field of safety evaluation, many of the topics presented were problem specific. In order to assist the reader in selecting the material of primary interest a matrix of the topics covered by each participant is shown in Table 1. This table relates the authors to the subject matter, providing a guide through the diverse range of topics presented at the workshop.

This book offers an introduction to piezoelectric shells and distributed sensing, energy harvesting and control applications. It familiarizes readers with a generic approach of piezoelectric shells and fundamental electromechanics of distributed piezoelectric sensors, energy harvesters and actuators applied to shell structures. The book is divided into two major parts, the first of which focuses on piezoelectric shell continua, while the second examines distributing sensing, energy harvesting and control of elastic continua, e.g., shells and plates. The exploitation of new, advanced multifunctional smart structures and structronic systems has been one of the mainstream research and development activities over the years. In the search for innovative structronics technologies, piezoelectric materials have proved to be very versatile in both sensor and actuator applications. Consequently, the piezoelectric technology has been applied to a broad range of practical applications, from small-scale nano- and micro-sensors/actuators to large-scale airplane and space structures and systems. The book provides practicing engineers and researchers with an introduction to advanced piezoelectric shell theories and distributed sensor/energy harvester/actuator technologies in the context of structural identification, energy harvesting and precision control. The book can also be used as a textbook for graduate students. This second edition contains substantial new materials, especially energy harvesting and experimental components, and has been updated and corrected for a new generation of readers.

The objective of the present book, which tries to summarize in an edited format and in a fairly comprehensive manner, many of the recent technical research accomplishments in the area of Smart Actuators and Smart Sensors, is to combine researchers and scientists from different fields into a single virtual room. The book hence reflects the multicultural nature of the field and will allow the reader to taste and appreciate different points of view, different engineering methods and different tools that must be jointly considered when designing and realizing smart actuation and sensing systems.

Since the first edition of this comprehensive handbook was published ten years ago, many changes have taken place in engineering and related technologies. Now, this best-selling reference has been updated for the 21st century, providing complete coverage of classic engineering issues as well as groundbreaking new subject areas. The second edition of The CRC Handbook of Mechanical Engineering covers every important aspect of the subject in a single volume. It continues the mission of the first edition in providing the practicing engineer in industry, government, and academia with relevant background and up-to-date information on the most important topics of modern mechanical engineering. Coverage of traditional topics has been updated, including sections on thermodynamics, solid and fluid mechanics, heat and mass transfer, materials, controls, energy conversion, manufacturing and design, robotics, environmental engineering, economics and project management, patent law, and transportation. Updates to these sections include new references and information on computer technology related to the topics. This edition also includes coverage of new topics such as nanotechnology, MEMS, electronic packaging, global climate change, electric and hybrid vehicles, and bioengineering.