Radiation Physics And Chemistry Of Polymers

This text examines the effect of radiation on polymers and the versatility of its industrial applications. By helping readers understand and solve problems associated with radiation processing of polymers, it serves as an important reference and fills a gap in the literature. Radiation processing can significantly improve important properties of polymers, however, there are still misconceptions about processing polymers by using ionizing radiation. This book explains the radiation processing of polymeric materials used in many industrial products including cars, airplanes, computers, and TVs. It even addresses emerging "green" issues like biomaterials and hydrogels.

Part of the series "New Concepts in Polymer Science", this volume contains information on the main theoretical and practical problems involved in radiation chemistry of polymers. The processes of polymerization and modification of polymers by grafting, crosslinking and degradation, induced by ionizing radiation, are all described, as well as the radiation resistance of polymers and their protection from radiation. The book also contains applications of radiation chemistry of polymers, such as: principles of selection of radiation-chemical processes for industrial use; choice of radiation sources for specific processes; modification of textile and film materials by grafting; manufacturing of heat-shrinkable, thermostable and mechanically strong polymer products; composites; rubber vulcanizates and self-adhesive products; paints and coatings; man-made fibres; materials for microelectronics; and polymer materials for medical purposes.

Radiation Effects in Materials, Volume 1: Atomic Radiation and Polymers considers the theoretical and experimental studies on the association between polymers and atomic radiation. The use of radiation in polymer science constitutes a powerful tool for the quantitative study of macromolecules. This book consists of 31 chapters, and starts with a brief introduction to fundamentals of atomic radiation and polymer structure. The next chapters focus on some aspect of atomic radiation, including radiation units, radiation-matter interaction, and nuclear and electrical sources of radiation. A chapter presents the appropriate methods to study radiation chemistry and polymer. Considerable chapters are devoted to the molecular structure, chemistry, and reactions of polymers. This volume also describes some significant chemical changes of radiation. Other chapters explore the properties and reactions of various irradiated polymers. The remaining chapters deal with radiation protection effects in polymers, which are processes wherein small changes in chemical structure within a molecule or in its neighborhood can exert a disproportionately large influence on the overall chemical reactions. This book is of value to nuclear and solid state physicists, organic and polymer chemists, and nuclear engineers and radiobiologists.

Atomic Radiation and Polymers examines the effects of radiation on polymer materials. The title deals with chemical changes that took place when polymers are exposed to radiation, and how these changes affect the physical properties of the polymers. The text first covers the interaction of radiation and matter, along with radiation sources and dosimetry. Next, the selection deals with the general properties of long chain polymers. The text also details the organic molecules and irradiated polymers. Chapters 22 to 24 tackle the radiation-induced changes in nuclear chain reaction, while Chapter 25 discusses the irradiation of polymers in solution where both direct and indirect effects occur. The next series of chapters details the theoretical aspects of reactions between the initial acts of ionization or excitation. The last two chapters cover the conductivity change at low radiation intensities, along with the data on radiation damage at very high intensities. The book will be of great interest to researchers and practitioners from the field of nuclear science and polymer technology.

Part of the series "New Concepts in Polymer Science", this volume contains information on the main theoretical and practical problems involved in radiation chemistry of polymers. The processes of polymerization and modification of polymers by grafting, crosslinking and degradation, induced by ionizing radiation, are all described, as well as the radiation resistance of polymers and their protection from radiation. The book also contains applications of radiation chemistry of polymers, such as: principles of selection of radiation-chemical processes for industrial use; choice of radiation sources for specific processes; modification of textile and film materials by grafting; manufacturing of heat-shrinkable, thermostable and mechanically strong polymer products; composites; rubber vulcanizates and self-adhesive products; paints and coatings; man-made fibres; materials for microelectronics; and polymer materials for medical purposes.

This book explains various kinds of non-ionizing and high-energy radiations, their interaction with materials and chemical reactions, and conditions of various kinds of materials development technologies including applications. It covers a processing-structure-property relationship and radiations used in developing many advanced materials used in various fields. It highlights application-oriented materials synthesis and modification covering a wide variety of materials such as plastics, rubber, thermo-set, ceramics, and so forth by various radiations. Features: Explains ionizing and non-ionizing radiation-assisted materials development technologies, for polymers, ceramics, metals, and carbons. Covers radiation-assisted synthesis, processing, and modification of all kinds of materials. Provides comparative studies, merits, demerits, and applications very systematically. Criss-crosses polymers science and technology, radiation technology, advanced materials technology, biomaterials technology, and so forth. Includes a section on 3D printing by LASER melting of CoCr alloys. This book is aimed at researchers and graduate students in materials science, radiation chemistry and physics, and polymer and other materials processing.