Robot Building For Beginners Third Edition

"I wrote this book because I love building robots. I want you to love building robots, too. It took me a while to learn about many of the tools and parts in amateur robotics. Perhaps by writing about my experiences, I can give you a head start."--David Cook Robot Building for Beginners, Third Edition provides basic, practical knowledge on getting started in amateur robotics. There is a mix of content: from serious reference tables and descriptions to personal stories and humorous bits. The robot described and built in this book is battery powered and about the size of a lunch box. It is autonomous; that is, it isn't remote controlled. The book is broken up into small chapters, suitable for bedtime (or bathroom) reading. The characteristics and purposes of each major component (resistor, transistor, wire, and motor) are described, followed by a hands-on experiment to demonstrate. Not only does this help the reader to understand a particular piece, but it also prepares them with processes to learn new parts on their own. An appendix offers an introduction to 3D printing and parts of the robot can, as an alternative, be "printed" using a 3D printer. The master project of the book is a simple, entertaining, line-following robot.

“I wrote this book because I love building robots. I want you to love building robots, too. It took me a while to learn about many of the tools and parts in amateur robotics. Perhaps by writing about my experiences, I can give you a head start.” —David Cook Robot Building for Beginners, Second Edition is an update of David Cook’s best-selling Robot Building for Beginners. This book continues its aim at teenagers and adults who have an avid interest in science and dream of building household explorers. No formal engineering education is assumed. The robot described and built in this book is battery powered and about the size of a lunchbox. It is autonomous. That is, it isn’t remote controlled. You’ll begin with some tools of the trade, and then work your way through prototyping, robot bodybuilding, and eventually soldering your own circuit boards. By the book’s end, you will have a solid amateur base of understanding so that you can begin creating your own robots to vacuum your house or maybe even rule the world!

Always wanted to build a robot but didn't know where to start? This user-friendly guide shows what robots can do, how they work, and more Ready to enter the world of robotics? Then this book is for you! If you don't know much about electronics, high-tech tools, or computer programming, that’s okay. If you can work with some basic tools (such as pliers, a screwdriver, and a cutting knife), have a computer and know your way around it, and want to make a robot, you’re in the right place. Robot Building For Dummies walks you through building your very own little metal assistant from a kit, dressing it up, giving it a brain, programming it to do things, and even making it talk. In this hands-on guide that's illustrated with step-by-step instructions and written in plain English, you get an overview of robotics and the tools, technology, and skills you need to become a robot builder. You'll discover The various approaches to robot building, such as building from scratch or starting with a kit The mechanical parts of a robot and how they fit together The components of an efficient workspace and how to set one up Programming basics you need to enter and download commands into your robot How to add a controller, which lets you download software programs to your robot Using an editor program to connect to your robot The importance of preparing the parts of a robot kit and then assembling the chassis, wheels, and sensor whiskers The fun of making your robot functional by adding motion detection, light sensors, and more How to troubleshoot common problems and fix them to save your robot's life Along the way, you'll gather tidbits about robot history, enthusiasts' groups, a list of parts suppliers, and all-important safety tips. As an added bonus, Robot Building For Dummies comes with rebates for your robot building kit – no more waiting, grab your copy and start building your robot today.

The amateur robotics market is maturing every year There are even several companies that cater specifically to the hobbyist and educational market. With the advent of such organisations as FIRST and KISS robotics, it is the perfect time to release a new and clearly improved version of our powerhouse RBB. Key features Covers LEGO to legged robot construction plans to provide a scope from the raw beginner to the intermediate/advanced reader ALL projects are being revamped to be more usable, more customisable, and more visual -- with illustrations of the final product right at the beginning of the chapter Eliminates the outdated or "out of tune" chapters that don't appeal to current robot audiences UNPRECEDENTED author duo -- literally the two grand masters of the robotic world

Find out everything you need to know to build powerful robots with the most up-to-date ROS About This Book This comprehensive, yet easy-to-follow guide will help you find your way through the ROS framework Successfully design and simulate your 3D robot model and use powerful robotics algorithms and tools to program and set up your robots with an unparalleled experience by using the exciting new features from Robot Kinetic Use the latest version of gazebo simulator, OpenCV 3.0, and C++11 standard for your own algorithms Who This Book Is For This book is suitable for an ROS beginner as well as an experienced ROS roboticist or ROS user or developer who is curious to learn ROS Kinetic and its features to make an autonomous Robot. The book is also suitable for those who want to integrate sensors and embedded systems with other software and tools using ROS as a framework. What You Will Learn Understand the concepts of ROS, the command-line tools, visualization GUIs, and how to debug ROS Connect robot sensors and actuators to ROS Obtain and analyze data from cameras and 3D sensors Use Gazebo for robot/sensor and environment simulation Design a robot and see how to make it map the environment, navigate autonomously, and manipulate objects in the environment using MoveIt! Add vision capabilities to the robot using OpenCV 3.0 Add 3D perception capabilities to the robot using the latest version of PCL In Detail Building and programming a robot can be cumbersome and time-consuming, but not when you have the right collection of tools, libraries, and more importantly expert collaboration. ROS enables collaborative software development and offers an unmatched simulated environment that simplifies the entire robot building process. This book is packed with hands-on examples that will help you program your robot and give you complete solutions using open source ROS libraries and tools. It also shows you how to use virtual machines and Docker containers to simplify the installation of Ubuntu and the ROS framework, so you can start working in an isolated and control environment without changing your regular computer setup. It starts with the installation and basic concepts, then continues with more complex modules available in ROS such as sensors and actuators integration (drivers), navigation and mapping (so you can create an autonomous mobile robot), manipulation, Computer Vision, perception in 3D with PCL, and more. By the end of the book, you'll be able to leverage all the ROS Kinetic features to build a fully fledged robot for all your needs. Style and approach This book is packed with hands-on examples that will help you program your robot and give you complete solutions using ROS open source libraries and tools. All the robotics concepts and modules are explained and multiple examples are provided so that you can understand them easily.

In Learn Robotics with Raspberry Pi, you'll learn how to build and code your own robot projects with just the Raspberry Pi microcomputer and a few easy-to-get components - no prior experience necessary! Learn Robotics with Raspberry Pi will take you from inexperienced maker to robot builder. You'll start off building a two-wheeled robot powered by a Raspberry Pi minicomputer and then program it using Python, the world's most popular programming language. Gradually, you'll improve your robot by adding increasingly advanced functionality until it can follow lines, avoid obstacles, and even recognize objects of a certain size and color using computer vision. Learn how to: - Control your robot remotely using only a Wii remote - Teach your robot to use sensors to avoid obstacles - Program your robot to follow a line autonomously - Customize your robot with LEDs and speakers to make it light up and play sounds - See what your robot sees with a Pi Camera As you work through the book, you'll learn fundamental electronics skills like how to wire up parts, use resistors and regulators, and determine how much power your robot needs. By the end, you'll have learned the basics of coding in Python and know enough about working with hardware like LEDs, motors, and sensors to expand your creations beyond simple robots.

Make your First Robot will help students to build and program their first robot using Arduino. It starts with an introduction of the hardware and software required to build and program the robots. The concepts are explained with simple analogies. Detailed explanation of the functionalities and programming of each hardware component are given. Integration of all the hardware components and programs to make a fully functional robot is explained for a mini Path-finder and Robotic Arm. Inexpensive components are used to build these robots. This book will flourish your imagination to the next level of robotics.

Absolutely no experience needed! Learn robot building from the ground up, hands-on, in full color! Love robots? Start building them. It’s way easier than you ever imagined! John Baichtal has helped thousands of people get started with robotics. He knows what beginners need to know. He knows your questions. He knows where you might need extra help. Now, he’s brought together this practical knowledge in one incredibly easy tutorial. Hundreds of full-color photos guide you through every step, every skill. You’ll start simple, as you build a working robot in the very first chapter. Then, you’ll grow your skills to expert-level: powering motors, configuring sensors, constructing a chassis, even programming low-cost Arduino microcontrollers. You’ll learn hands-on, through real step-by-step projects...and go straight to the cutting-edge with in-depth sidebars. Wondering just how much you can really do? Baichtal shows you 30 incredible robots built by people just like you! John Baichtal’s books about toys, tools, robots, and hobby electronics include Hack This: 24 Incredible Hackerspace Projects from the DIY Movement; Basic Robot Building With Lego Mindstorms NXT 2.0; Arduino for Beginners; MAKE: Lego and Arduino Projects for MAKE (as coauthor); and the forthcoming Building Your Own Drones: The Beginner’s Guide to UAVs and ROVs. A founding member of the pioneering Twin Cities Maker hackerspace, he got his start writing for Wired’s legendary GeekDad blog, and for DIYer bible MAKE Magazine. Make your robots move with motors and wheels Build solar-powered robots that work without batteries Control robots via Wi-Fi, radio, or even across the Internet Program robots to respond to sensor inputs Use your standard TV remote to control your robots Create robots that detect intruders and shoot them with Nerf® darts Grab and carry objects using claws and grippers Build water-borne robots that float, submerge, and “swim” Create “artbots” that paint or draw original artworks Enable your robots to send text messages when they take specific actions Discover today’s new generation of hobbyist-friendly robotics kits Organize your ultimate robot-builder’s toolbox Master simple safety routines that protect you whatever you’re building