Safety Design For Space Systems

Progress in space safety lies in the acceptance of safety design and engineering as an integral part of the design and implementation process for new space systems. Safety must be seen as the principle design driver of utmost importance from the outset of the design process, which is only achieved through a culture change that moves all stakeholders toward front-end loaded safety concepts. This approach entails a common understanding and mastering of basic principles of safety design for space systems at all levels of the program organisation. Fully supported by the International Association for the Advancement of Space Safety (IAASS), written by the leading figures in the industry, with frontline experience from projects ranging from the Apollo missions, Skylab, the Space Shuttle and the International Space Station, this book provides a comprehensive reference for aerospace engineers in industry. It addresses each of the key elements that impact on space systems safety, including: the space environment (natural and induced); human physiology in space; human rating factors; emergency capabilities; launch propellants and oxidizer systems; life support systems; battery and fuel cell safety; nuclear power generators (NPG) safety; habitat activities; fire protection; safety-critical software development; collision avoidance systems design; operations and on-orbit maintenance. * The only comprehensive space systems safety reference, its must-have status within space agencies and suppliers, technical and aerospace libraries is practically guaranteed * Written by the leading figures in the industry from NASA, ESA, JAXA, (et cetera), with frontline experience from projects ranging from the Apollo missions, Skylab, the Space Shuttle, small and large satellite systems, and the International Space Station. * Superb quality information for engineers, programme managers, suppliers and aerospace technologists; fully supported by the IAASS (International Association for the Advancement of Space Safety)

The lack of widespread education in space safety engineering and management has profound effects on project team effectiveness in integrating safety during design. On one side, it slows down the professional development of junior safety engineers, while on the other side it creates a sectarian attitude that isolates safety engineers from the rest of the project team. To speed up professional development, bridge the gap within the team, and prevent hampered communication and missed feedback, the entire project team needs to acquire and develop a shared culture of space safety principles and techniques.The second edition of Safety Design for Space Systems continues to address these issues with substantial updates to chapters such as battery safety, life support systems, robotic systems safety, and fire safety. This book also features new chapters on crew survivability design and nuclear space systems safety. Finally, the discussion of human rating concepts, safety-by-design principles, and safety management practices have also been revised and improved. With contributions from leading experts worldwide, this second edition represents an essential educational resource and reference tool for engineers and managers working on space projects. Provides basic multidisciplinary knowledge on space systems safety design Addresses how space safety engineering and management can be implemented in practice Includes new chapters on crew survivability design and nuclear space systems safety Fully revised and updated to reflect the latest developments in the field

Endorsed by the International Association for the Advancement of Space Safety (IAASS) and drawing on the expertise of the world’s leading experts in the field, Safety Design for Space Operations provides the practical how-to guidance and knowledge base needed to facilitate effective launch-site and operations safety in line with current regulations. With information on space operations safety design currently disparate and difficult to find in one place, this unique reference brings together essential material on: Best design practices relating to space operations, such as the design of spaceport facilities. Advanced analysis methods, such as those used to calculate launch and re-entry debris fall-out risk. Implementation of safe operation procedures, such as on-orbit space traffic management. Safety considerations relating to the general public and the environment in addition to personnel and asset protection. Taking in launch operations safety relating unmanned missions, such as the launch of probes and commercial satellites, as well as manned missions, Safety Design for Space Operations provides a comprehensive reference for engineers and technical managers within aerospace and high technology companies, space agencies, spaceport operators, satellite operators and consulting firms. Fully endorsed by the International Association for the Advancement of Space Safety (IAASS), with contributions from leading experts at NASA, the European Space Agency (EASA) and the US Federal Aviation Administration (FAA), amongst others Covers all aspects of space operations relating to safety of the general public, as well as the protection of valuable assets and the environment Focuses on launch operations safety relating to manned and unmanned missions, such as the launch of probes and commercial satellites

Hazards to aircraft are a particular concern for the design of safe space vehicle operations. A valid risk mitigation strategy requires accurately computed risks, and the first section of this chapter discusses this. This is followed by a section on aircraft vulnerability modeling. A straightforward approach for managing aircraft risk, which is often sufficient for low-use airspace, is then discussed. Potential methods for reducing the impact on airspace, which may be useful in the absence of a real-time system, are then explored. Real-time management is covered in the subsequent section, and gives a potential architecture based on the used for management of the US National Air Space for Space Shuttle Orbiter re-entries after the Columbia accident.

The safety of any space system requires a deliberate and interdisciplinary integration of the flight hardware design with the design of its operations throughout the entire lifecycle of the system. This chapter introduces the subsequent chapters that more thoroughly address safety issues associated with the operations of space vehicles, from the design of the infrastructure on ground, through launch, on-orbit, and re-entry operations. This chapter begins with a discussion of safety and risk management at the conceptual level, including several fundamental goals and definitions. The balance of the chapter describes several seminal events and lays the foundation for a graduate level education in space operations safety.

Space Safety and Human Performance provides a comprehensive reference for engineers and technical managers within aerospace and high technology companies, space agencies, operators, and consulting firms. The book draws upon the expertise of the world’s leading experts in the field and focuses primarily on humans in spaceflight, but also covers operators of control centers on the ground and behavior aspects of complex organizations, thus addressing the entire spectrum of space actors. During spaceflight, human performance can be deeply affected by physical, psychological and psychosocial stressors. Strict selection, intensive training and adequate operational rules are used to fight performance degradation and prepare individuals and teams to effectively manage systems failures and challenging emergencies. The book is endorsed by the International Association for the Advancement of Space Safety (IAASS). Provides information on critical aspects of human performance in space missions Addresses the issue of human performance, from physical and psychosocial stressors that can degrade performance, to selection and training principles and techniques to enhance performance Brings together essential material on: cognition and human error; advanced analysis methods such as human reliability analysis; environmental challenges and human performance in space missions; critical human factors and man/machine interfaces in space systems design; crew selection and training; and organizational behavior and safety culture Includes an endorsement by the International Association for the Advancement of Space Safety (IAASS)

This chapter provides an understanding of quantitative risk assessment as it is applied in the operational phase of complex aerospace missions. It addresses the application of a quantitative risk model that has already been built and reviewed for a project or program that is in the operations phase. Several aerospace examples are discussed, but the focus of the chapter is the use of risk modeling in the operational phase of the International Space Station (ISS) program. Examples are presented to highlight the application and flexibility of risk assessments or trade studies in the operations phase. Operational risk trades account for nearly all of the risk analysis performed for the ISS program.

The definition of all space systems starts with the establishment of its fundamental parameters: requirements to be fulfilled, overall system and satellite design, analysis and design of the critical elements, developmental approach, cost, and schedule. There are only a few texts covering early design of space systems and none of them has been specifically dedicated to it. Furthermore all existing space engineering books concentrate on analysis. None of them deal with space system synthesis – with the interrelations between all the elements of the space system. Introduction to Space Systems concentrates on understanding the interaction between all the forces, both technical and non-technical, which influence the definition of a space system. This book refers to the entire system: space and ground segments, mission objectives as well as to cost, risk, and mission success probabilities. Introduction to Space Systems is divided into two parts. The first part analyzes the process of space system design in an abstract way. The second part of the book focuses on concrete aspects of the space system design process. It concentrates on interactions between design decisions and uses past design examples to illustrate these interactions. The idea is for the reader to acquire a good insight in what is a good design by analyzing these past designs.