Safety Of Nuclear Power Plants Design

On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Establishes design requirements for safety functions and associated structures, systems and components important to the safe operation of nuclear power plants. This publication also establishes requirements for a comprehensive safety assessment to identify the potential hazards that may arise in the operation of plants.

"On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems"--Provided by publisher.

The present report is a revision of Safety Series No. 75-INSAG-3 (1988), updating the statements made on the objectives and principles of safe design and operation for electricity generating nuclear power plants. It includes the improvements made in the safety of operating nuclear power plants and identifies the principles underlying the best current safety policies to be applied in future plants. It presents INSAG's understanding of the principles underlying the best current safety policies and practices of the nuclear power industry.

The reactor core is the central part of a nuclear reactor where nuclear fission occurs. It consists of four basic systems and components: the fuel (including fuel rods and the fuel assembly structure), the coolant, the moderator and the control rods, as well as additional structures such as reactor pressure vessel internals, core support plates, and the lower and upper internal structure in light water reactors. This Safety Guide provides recommendations on meeting the safety requirements established in IAEA Safety Standards Series No. SSR-2/1 (Rev. 1), Safety of Nuclear Power Plants: Design, applied to the design of the reactor core for nuclear power plants. The publication addresses the safety aspects of the core design and includes neutronic, thermohydraulic, thermomechanical and structural mechanical aspects. Other aspects considered are those relating to reactor core control, shutdown and monitoring, and core management.

Each year billions of dollars are being spent in the area of nuclear power generation to design, construct, manufacture, operate, and maintain various types of systems around the globe. Many times these systems fail due to safety, reliability, human factors, and human error related problems. The main objective of this book is to combine nuclear power plant safety, reliability, human factors, and human error into a single volume for those individuals that work closely during the nuclear power plant design phase, as well as other phases, thus eliminating the need to consult many different and diverse sources in obtaining the desired information.