Safety Related Instrumentation And Control Systems For Nuclear Power Plants

The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.

This guide deals primarily with design requirements for instrumentation and control systems important to safety but not part of the protection system (Safety Series No. 50-SG-D3). It gives recommendations on instrumentation and control systems for the prevention or termination of plant transients to avoid, if possible, the actuation of safety systems.

Accidents and natural disasters involving nuclear power plants such as Chernobyl, Three Mile Island, and the recent meltdown at Fukushima are rare, but their effects are devastating enough to warrant increased vigilance in addressing safety concerns. Nuclear Power Plant Instrumentation and Control Systems for Safety and Security evaluates the risks inherent to nuclear power and methods of preventing accidents through computer control systems and other such emerging technologies. Students and scholars as well as operators and designers will find useful insight into the latest security technologies with the potential to make the future of nuclear energy clean, safe, and reliable.

The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.

Safety and security are crucial to the operations of nuclear power plants, but cyber threats to these facilities are increasing significantly. Instrumentation and control systems, which play a vital role in the prevention of these incidents, have seen major design modifications with the implementation of digital technologies. Advanced computing systems are assisting in the protection and safety of nuclear power plants; however, significant research on these computational methods is deficient. Cyber Security and Safety of Nuclear Power Plant Instrumentation and Control Systems is a pivotal reference source that provides vital research on the digital developments of instrumentation and control systems for assuring the safety and security of nuclear power plants. While highlighting topics such as accident monitoring systems, classification measures, and UAV fleets, this publication explores individual cases of security breaches as well as future methods of practice. This book is ideally designed for engineers, industry specialists, researchers, policymakers, scientists, academicians, practitioners, and students involved in the development and operation of instrumentation and control systems for nuclear power plants, chemical and petrochemical industries, transport, and medical equipment.

This book presents a compilation of selected papers from the Fourth International Symposium on Software Reliability, Industrial Safety, Cyber Security and Physical Protection of Nuclear Power Plant, held in August 2019 in Guiyang, China. The purpose of the symposium was to discuss inspection, testing, certification and research concerning the software and hardware of instrument and control (I&C) systems used at nuclear power plants (NPP), such as sensors, actuators and control systems. The event provides a venue for exchange among experts, scholars and nuclear power practitioners, as well as a platform for the combination of teaching and research at universities and enterprises to promote the safe development of nuclear power plants. Readers will find a wealth of valuable insights into achieving safer and more efficient instrumentation and control systems.