Signal Integrity Characterization Techniques

Cogently addressing the future of signal integrity and the effect it will have on the data transmission industry as a whole, this all-inclusive guide addresses a wide array of technologies, from traditional digital data transmission to microwave measurements, and accessibly examines the gap between the two. Focusing on real world applications and providing a wide array of case studies that show how each technology can be used—from backplane design challenges to advanced error correction techniques—this guide addresses many of today’s high-speed technologies while also providing excellent insight into their future direction. With numerous valuable lessons pertaining to the signal integrity industry, this resource is the ultimate must-read guide for any specialist in the design engineering field.

This multimedia eBook establishes a solid foundation in the essential principles of how signals interact with transmission lines, how the physical design of interconnects affects transmission line properties, and how to interpret single-ended and differential time domain reflection (TDR) measurements to extract important figures of merits and avoid common mistakes. This book presents an intuitive understanding of transmission lines. Instructional videos are provided in every chapter that cover important aspects of the interconnect design and characterization process. This video eBook helps establish foundations for designing and characterizing the electrical properties of interconnects to explain in a simplified way how signals propagate and interact with interconnects and how the physical design of transmission structures will impact performance. Never be intimidated by impedance or differential pairs again.

This book presents the necessary concepts for the design and testing of radiofrequency and high-speed circuits. Signal and propagation theory is presented for the various circuit levels, from the chip to the PCB. The co-existence of high-speed wideband signals of radiofrequency signals and supply circuits is developed in order to provide design rules for engineers and Masters-level students. The subjects covered include: interconnections and signal integrity; spectral analysis techniques for high-speed signals; design techniques for signal integrity; the transmission-line concept; methods for temporal analysis and techniques for frequency domain analysis for connectics.

A practical guide to solving signal integrity problems using s-parameters.

Before putting digital systems for information technology or telecommunication applications on the market, an essential requirement is to perform tests in order to comply with the limits of radiated emission imposed by the standards. This book provides an investigation into signal integrity (SI) and electromagnetic interference (EMI) problems. Topics such as reflections, crosstalk, switching noise and radiated emission (RE) in high-speed digital systems are covered, which are essential for IT and telecoms applications. The highly important topic of modelling is covered which can reduce costs by enabling simulation data to demonstrate that a product meets design specifications and regulatory limits. According to the new European EMC directive, this can help to avoid the expensive use of large semi-anechoic chambers or open area test sites for radiated emission assessments. Following a short introduction to signalling and radiated interference in digital systems, the book provides a detailed characterization of logic families in terms of static and dynamic characteristic useful for modelling techniques. Crosstalk in multi-coupled line structures are investigated by analytical, graphical and circuit-based methods, and techniques to mitigate these phenomena are provided. Grounding, filtering and shielding with multilayer PCBs are also examined and design rules given. Written by authors with extensive experience in industry and academia. Explains basic conceptual problems from a theoretical and practical point of view by using numerous measurements and simulations. Presents models for mathematical and SPICE-like circuit simulators. Provides examples of using full-wave codes for SI and RE investigations. Companion website containing lists of codes and sample material. Signal Integrity and Radiated Emission of High-Speed Digital Systems is a valuable resource to industrial designers of information technology, telecommunication equipment and automation equipment as well as to development engineers. It will also be of interest to managers and designers of consumer electronics, and researchers in electronics.

The #1 Practical Guide to Signal Integrity Design—Now Updated with Extensive New Coverage! This book brings together up-to-the-minute techniques for finding, fixing, and avoiding signal integrity problems in your design. Drawing on his work teaching more than five thousand engineers, world-class signal and power integrity expert Eric Bogatin systematically reviews the root causes of all six families of signal integrity problems and shows how to design them out early in the design cycle. This edition’s extensive new content includes a brand-new chapter on S-parameters in signal integrity applications, and another on power integrity and power distribution network design—topics at the forefront of contemporary electronics design. Coverage includes A fully up-to-date introduction to signal integrity and physical design How design and technology selection can make or break the performance of the power distribution network Exploration of key concepts, such as plane impedance, spreading inductance, decoupling capacitors, and capacitor loop inductance Practical techniques for analyzing resistance, capacitance, inductance, and impedance Solving signal integrity problems via rules of thumb, analytic approximation, numerical simulation, and measurement Understanding how interconnect physical design impacts signal integrity Managing differential pairs and losses Harnessing the full power of S-parameters in high-speed serial link applications Ensuring power integrity throughout the entire power distribution path Realistic design guidelines for improving signal integrity, and much more Unlike books that concentrate on theoretical derivation and mathematical rigor, this book emphasizes intuitive understanding, practical tools, and engineering discipline. Designed for electronics industry professionals from beginners to experts it will be an invaluable resource for getting signal integrity designs right the first time, every time.

Foreword by Joungho Kim The Hands-On Guide to Power Integrity in Advanced Applications, from Three Industry Experts In this book, three industry experts introduce state-of-the-art power integrity design techniques for today’s most advanced digital systems, with real-life, system-level examples. They introduce a powerful approach to unifying power and signal integrity design that can identify signal impediments earlier, reducing cost and improving reliability. After introducing high-speed, single-ended and differential I/O interfaces, the authors describe on-chip, package, and PCB power distribution networks (PDNs) and signal networks, carefully reviewing their interactions. Next, they walk through end-to-end PDN and signal network design in frequency domain, addressing crucial parameters such as self and transfer impedance. They thoroughly address modeling and characterization of on-chip components of PDNs and signal networks, evaluation of power-to-signal coupling coefficients, analysis of Simultaneous Switching Output (SSO) noise, and many other topics. Coverage includes The exponentially growing challenge of I/O power integrity in high-speed digital systems PDN noise analysis and its timing impact for single-ended and differential interfaces Concurrent design and co-simulation techniques for evaluating all power integrity effects on signal integrity Time domain gauges for designing and optimizing components and systems Power/signal integrity interaction mechanisms, including power noise coupling onto signal trace and noise amplification through signal resonance Performance impact due to Inter Symbol Interference (ISI), crosstalk, and SSO noise, as well as their interactions Validation techniques, including low impedance VNA measurements, power noise measurements, and characterization of power-to-signal coupling effects Power Integrity for I/O Interfaces will be an indispensable resource for everyone concerned with power integrity in cutting-edge digital designs, including system design and hardware engineers, signal and power integrity engineers, graduate students, and researchers.