Steels Processing Structure And Performance Second Edition

Steels: Processing, Structure, and Performance is a comprehensive guide to the broad, dynamic physical metallurgy of steels. The volume is an extensively revised and updated edition of the classic 1990 book Steels: Heat Treatment and Processing Principles. Eleven new chapters expand the coverage in the previous edition, and other chapters have been reorganized and updated. This volume is an essential reference for anyone who makes, uses, studies, or designs with steel. The interrelationships between chemistry, processing, structure, and performance--the elements of physical metallurgy--are integrated for all the types of steel discussed. The evolution, characterization, and performance of steel microstructures are described, with increased emphasis on deformation and fracture. Heat treatment remains a vital aspect of the manufacture of steel products, and the coverage of thermal processing and its effect on steels is expanded in this edition. Dramatic changes in steel manufacture have occurred in the 15 years since the publication of the 1990 edition. Low-carbon sheet steels have experienced the most dynamic changes: thermal processing of sheet steels on a massive continuous scale has produced new grades with only subtle changes in chemistry. Low carbon sheet steels, together with strengthening mechanisms, developments in microalloyed forging steels, steels with bainitic and a variety of ferritic microstructures, quench and tempered steel performance, high-carbon steels for rail and ultra-high strength wire, and the causes of low toughness and embrittlement are all discussed in new chapters. Brief coverage is provided on the history of steel, including the time frame for important developments. A link to steelmaking and solidification is made in the chapter on the effects of primary processing on steel microstructure. The text is meant to be informative, readable, up-to-date, and self contained. Principles, concepts, and understanding of microstructural evolution and performance, within the framework of processing and properties, are illustrated, by plots of data, micrographs and schematic diagrams. A special effort has been made to include references to the most pertinent books, reviews, and technical papers on a given subject. About the Author Dr. George Krauss is currently University Emeritus Professor at the Colorado School of Mines and a metallurgical consultant specializing in steel microstructural systems. He served at Lehigh University as Assistant Professor, Associate Professor, and Professor of Metallurgy and Materials Science from 1963 to 1975, and in 1975, joined the faculty of the Colorado School of Mines as the AMAX Foundation Professor in Physical Metallurgy. He was the John Henry Moore Professor of Metallurgical and Materials Engineering at the time of his retirement from the Colorado School of Mines in 1997. In 1984, Dr. Krauss was a principal in the establishment of the Advanced Steel Processing and Products Research Center, a National Science Foundation Industry-University cooperative research center at the Colorado School of Mines, and served as its first Director until 1993. In addition to the three editions of the present volume, he coauthored the book Tool Steels, Fifth Edition, ASM International, 1998, and edited or co-edited conference volumes on tempering of steel, carburizing, zinc-based coatings on steel, and microalloyed forging steels. He has published over 300 papers and lectured widely in technical conferences, universities, corporations and ASM International chapters, including a number of keynote, invited and honorary lectures. He presented the Edward DeMille Campbell Memorial Lecture of ASM International in 2000 and the Howe Memorial Lecture of the Iron and Steel Society in 2003. Dr. Krauss has served as the President of the International Federation of Heat Treatment and Surface Engineering (IFHTSE), 1989-91, and as President of ASM International, 1996-97. He is Fellow of ASM International, TMS, and IFHTSE. He has been awarded the Adolf Martens Medal of the German Society for Heat Treatment and Materials, the Charles S. Barrett Silver Medal of the Rocky Mountain Chapter of ASM, the George Brown Gold Medal of 3.

George Krauss, University Emeritus Professor, Colorado School of Mines and author of the best-selling ASM book Steels: Processing, Structure, and Performance, discusses some of the important additions and updates to the new second edition.

Steels: Processing, Structure, and Performance is a comprehensive guide to the broad, dynamic physical metallurgy of steels. The volume is an extensively revised and updated edition of the classic 1990 book Steels: Heat Treatment and Processing Principles. Eleven new chapters expand the coverage in the previous edition, and other chapters have been reorganized and updated. This volume is an essential reference for anyone who makes, uses, studies, or designs with steel. The interrelationships between chemistry, processing, structure, and performance--the elements of physical metallurgy--are integrated for all the types of steel discussed.

The book briefly describes the structure, properties and applications of various grades of steel, primarily aimed at non-metallurgical students from other engineering streams. The book consists of nine chapters covering most of the important types of steels and their physical metallurgy, microstructure and engineering applications including iron-carbon diagram, heat treatment, surface hardening methods, effect of alloying, specific applications, selection of materials, case studies and so forth. The book also contains subjective and objective questions aimed at exam preparation. Key Features Exclusive title aimed at introduction to steels for non-metallurgy audience Includes microstructure, composition, and properties of all the most commonly used steels Describes the heat treatments and the required alloying additions to process steel for the intended applications Discusses effects of alloying elements on steel Explores development of steels for specialized areas such as the automobile, aerospace, and nuclear industries

Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.

The completely revised Second Edition of Metallurgy for the Non-Metallurgist provides a solid understanding of the basic principles and current practices of metallurgy. This major new edition is for anyone who uses, makes, buys or tests metal products. For both beginners and others seeking a basic refresher, the new Second Edition of the popular Metallurgy for the Non-Metallurgist gives an all-new modern view on the basic principles and practices of metallurgy. This new edition is extensively updated with broader coverage of topics, new and improved illustrations, and more explanation of basic concepts. Why are cast irons so suitable for casting? Do some nonferrous alloys respond to heat treatment like steels? Why is corrosion so pernicious? These are questions that can be answered in this updated reference with many new illustrations, examples, and descriptions of basic metallurgy.

Automotive Steels: Design, Metallurgy, Processing and Applications explores the design, processing, metallurgy, and applications of automotive steels. While some sheet steels are produced routinely in high volume today, there have been significant advances in the use of steel in the automotive industry. This book presents these metallurgical and application aspects in a way that is not available in the current literature. The editors have assembled an international team of experts who discuss recent developments and future prospects for automotive steels, compiling essential reading for both academic and industrial metallurgists, automotive design engineers, and postgraduate students attending courses on the metallurgy of automotive materials. Presents recent developments on the design, metallurgy, processing, and applications of automotive steels Discusses automotive steels that are currently in the early stages of research, such as low-density and high modulus steels that are driving future development Covers traditional steels, advanced high strength steels, elevated Mn steels and ferrous composite materials

What is heat treatment? This book describes heat treating technology in clear, concise, and nontheoretical language. It is an excellent introduction and guide for design and manufacturing engineers, technicians, students, and others who need to understand why heat treatment is specified and how different processes are used to obtain desired properties. The new Second Edition has been extensively updated and revised by Jon. L. Dossett, who has more than forty years of experience in theat treating operations and management. The update adds important information about new processes and process control techniques that have been developed or refined in recent years. Helpfull appendices have been added on decarburization of steels, boost/diffues cycles for carburizing, and process verification.