The Aerodynamics Of Heavy Vehicles Ii Trucks Buses And Trains

It is our pleasure to present these proceedings for “The Aerodynamics of Heavy Vehicles II: Trucks, Buses and Trains” International Conference held in Lake - hoe, California, August 26-31, 2007 by Engineering Conferences International (ECI). Brought together were the world’s leading scientists and engineers from industry, universities, and research laboratories, including truck and high-speed train manufacturers and operators. All were gathered to discuss computer simu- tion and experimental techniques to be applied for the design of the more efficient trucks, buses and high-speed trains required in future years. This was the second conference in the series. The focus of the first conference in 2002 was the interplay between computations and experiment in minimizing ae- dynamic drag. The present proceedings, from the 2007 conference, address the development and application of advanced aerodynamic simulation and experim- tal methods for state-of-the-art analysis and design, as well as the development of new ideas and trends holding promise for the coming 10-year time span. Also - cluded, are studies of heavy vehicle aerodynamic tractor and trailer add-on - vices, studies of schemes to delay undesirable flow separation, and studies of - derhood thermal management.

It is our pleasure to present these proceedings from the United Engineering Foundation Conference on The Aerodynamics of Heavy Vehicles: Trucks, Buses and Trains held December 2-6, 2002, in Monterey, California. This Department of Energy, United Engineering Foundation, and industry sponsored conference brought together 90 leading engineering researchers from around the world to discuss the aerodynamic drag of heavy vehicles. Participants from national labs, academia, and industry, including truck manufacturers, discussed how computer simulation and experimental techniques could be used to design more fuel efficient trucks, buses, and trains. Conference topics included comparison of computational fluid dynamics calculations using both steady and unsteady Reynolds-averaged Navier-Stokes, large-eddy simulation, and hybrid turbulence models and experimental data obtained from the Department of Energy sponsored and other wind tunnel experiments. Advanced experimental techniques including three-dimensional particle image velocimetry were presented, along with their use in evaluating drag reduction devices. We would like to thank the UEF conference organizers for their dedication and quick response to sudden deadlines. In addition, we would like to thank all session chairs, the scientific advisory committee, authors, and reviewers for their many hours of dedicated effort that contributed to a successful conference and resulted in this document of the conference proceedings. We also gratefully acknowledge the support received from the United Engineering Foundation, the US Department of Energy, Lawrence Livermore National Laboratory, Volvo Trucks America, International Truck and Engine Corporation, and Freightliner LLC.

This volume contains papers presented at the International conference “The Aerodynamics of Heavy Vehicles III: Trucks, Buses and Trains” held in Potsdam, Germany, September 12-17, 2010 by Engineering Conferences International (ECI). Leading scientists and engineers from industry, universities and research laboratories, including truck and high-speed train manufacturers and operators were brought together to discuss computer simulation and experimental techniques to be applied for the design of more efficient trucks, buses and high-speed trains in the future. This conference was the third in the series after Monterey-Pacific Groove in 2002 and Lake Tahoe in 2007.The presentations address different aspects of train aerodynamics (cross wind effects, underbody flow, tunnel aerodynamics and aeroacoustics, experimental techniques), truck aerodynamics (drag reduction, flow control, experimental and computational techniques) as well as computational fluid dynamics and bluff body, wake and jet flows.

This book constitutes the refereed proceedings of the 25th International Conference on Parallel Computational Fluid Dynamics, ParCFD 2013, held in Changsha, China, in May 2013. The 35 revised full papers presented were carefully reviewed and selected from more than 240 submissions. The papers address issues such as parallel algorithms, developments in software tools and environments, unstructured adaptive mesh applications, industrial applications, atmospheric and oceanic global simulation, interdisciplinary applications and evaluation of computer architectures and software environments.

This outstanding thesis characterises the aerodynamic flow around a container freight train; investigating how changing container loading configurations affect the magnitude of aerodynamic forces measured on a container. 1/25th scale moving-model freight train experiments were carried out at the University of Birmingham’s TRAIN rig facility to investigate slipstream velocities and static pressure, as well as measuring, using a specifically designed on-board pressure monitoring system, the aerodynamic loads on containers. Results were compared with full scale data and assessed in terms European standards for trackside worker and passenger safety limits. Rail vehicle aerodynamic studies have tended to previously focus on high speed passenger trains in line with increases in train speed. The research presented within this thesis highlights the issues associated with the aerodynamic development around a freight train, providing the foundations for further research and a basis from which to develop international safety standards in relation to freight, as well as high speed trains.

The aim of this work, consisting of 9 individual, self-contained booklets, is to describe commercial vehicle technology in a way that is clear, concise and illustrative. Compact and easy to understand, it provides an overview of the technology that goes into modern commercial vehicles. Starting from the customer's fundamental requirements, the characteristics and systems that define the design of the vehicles are presented knowledgeably in a series of articles, each of which can be read and studied on their own. In this volume, Fuel Consumption and Consumption Optimization, the main focus is placed on the factors for optimizing consumption in the conventional vehicle. Fuel consumption can be optimized by four different factors: the technology of the vehicle, the conditions of its operation, the behavior of the driver and the maintenance and upkeep of the vehicle. These aspects are described in a way that is easily understood for training and practical application.

Train Aerodynamics: Fundamentals and Applications is the first reference to provide a comprehensive overview of train aerodynamics with full scale data results. With the most up-to-date information on recent advances and the possibilities of improvement in railway facilities, this book will benefit railway engineers, train operators, train manufacturers, infrastructure managers and researchers of train aerodynamics. As the subject of train aerodynamics has evolved slowly over the last few decades with train speeds gradually increasing, and as a result of increasing interest in new train types and high-speed lines, this book provides a timely resource on the topic. Examines the fundamentals and the state-of-the-art of train aerodynamics, beginning with experimental, numerical and analytical tools, and then thoroughly discussing the specific approaches in other sections Features the latest developments and progress in computational aerodynamics and experimental facilities Addresses problems relating to train aerodynamics, from the dimensioning of railway structures and trains, to risk analysis related to safety issues and maintenance Discusses basic flow patterns caused by bridges and embankments

This book provides an introduction to ground vehicle aerodynamics and methodically guides the reader through the various aspects of the subject. Those needing specific information or a refresher can easily jump to the material of interest. There is a particular emphasis on various vehicle types (passenger cars, trucks, trains, motorcycles, race cars, etc.). However, the book is focused on cars and trucks, which are the most common vehicles in the speed range in which the study of ground vehicle aerodynamics is beneficial. Readers will gain a fundamental understanding of the topic, which will help them design vehicles that have improved aerodynamics; this will lead to better fuel efficiency, improved performance, and increased passenger comfort. The author’s basic approach to the presentation of the material is complemented with review questions, application questions, exercises, and suggested projects at the end of most of the chapters, which helps the reader apply the information presented, either in the classroom or for self-study. Aside from offering a solid understanding of ground vehicle aerodynamics, the book also offers more thorough study of several key topics. One such topic is car-truck interaction, when one vehicle (usually the smaller one) is overtaking the other. There is a direct and instant benefit in terms of safety on the highway from understanding the forces at play when one vehicle passes the other in the same direction and sense. Chapters examine: • Drag • Noise and vehicle soiling • Wind tunnels and road/track testing • Numerical methods • Vehicle stability and control • Vehicle sectional design • Large vehicles: trucks, trailers, buses, trains • Severe service and off-road vehicles • Race cars and convertibles • Motorcycles • Concept vehicles