The Mechanical Testing Of Metals And Alloys

This compendium of twenty laboratory experiments on metals and alloys attempts to provide to students of Science and Engineering an insight about the relationship of the physical, specially mechanical properties of metals with grain structures/microstructures. In almost all the experiments, therefore, the microstructural investigation is provided. Experiments have also been included on the determination of important mechanical and thermal properties and on the aqueous and atmospheric corrosion of metals. Theoretical background of each experiment has been dealt with in good detail in order to enable the student to understand the underlying principles and to appreciate the significance of the experiments. Information which could not be accommodated given in the text of the experiments, has been provided in the form of appendices.These include: reflection microscopy, experimental determination of transition points through cooling curves to get data for plotting phase diagrams, and quenching media for tempering of alloys. In view of the importance of microstrucures for some metals and alloys have also been given.

This book provides an overview of the technical and commercial considerations regarding the viability of copper for engineering applications. Further, this work presents representative numerical data selected from the scientific literature as well as data collected from industrial sources from around the world.

Determination of the Mechanical and Technological Properties of Metals presents the principal types of testing machine and equipment. This book provides a brief description of the methods for determining the principal mechanical and technological properties of metals. Organized into three chapters, this book begins with an overview of mechanical testing of metals subdivide into static, dynamic, and fatigue testing depending of the method of load application as a function of time. This text then describes weld metal working under tensile loading conditions. Other chapters consider the various methods for the determination of the technological properties of metals, including longitudinal turning method and face turning method. This book discusses as well the methods of determining the machinability of metals, including two-tool test procedure, drilling test, and temperature test. This book is a valuable resource for students taking practical laboratory courses in metal working at technical colleges. Laboratory personnel will also find this book useful.