The Properties Of Optical Radiation Detectors And Radiometers

This is the first book to investigate the improved performance of optical radiation detectors developed from the ultraviolet to the far-infrared in the past two decades. The development and applications of these improved detectors opened up a new era in radiometric, photometric, colorimetric, and radiation-temperature measurements where earlier blackbody sources and lamps were used with lower performance and in limited application areas. This book will serve to help students, practicing scientists, engineers, technicians, and instrument manufacturers to learn, compare and select the proper detectors for building, using, and calibrating opto-electronic instruments with SI traceability and lowered measurement uncertainty in extended application areas.

This book discusses modern, user-friendly radiometric practices that make it possible to convert from traditional source-based optical radiation measurements to the more efficient and higher accuracy detector-based applications and calibrations. It considers improved performance optical detector and radiometer standards including photometers and tristimulus colorimeters, and describes research-based design considerations, measurement of radiometric, optical, and electronic characteristics, and comparison of absolute-, transfer-, and working-standard detectors and radiometers from the ultraviolet (UV) to the infrared (IR) range. The book will serve to guide the optical radiation measurement community, researchers, manufacturers, calibration laboratories, students, and practicing engineers to switch from the old and limited-use measurement methods to the higher performance detector-based applications. The radiometer standards discussed here can be used to produce wide range radiometric, photometric, colour, and radiation temperature measurements with low uncertainty.

The recently developed optical radiation detectors need well-designed radiometers to perform improved radiometric, photometric, colorimetric, and radiation-temperature measurements. They can produce higher performance than traditionally used blackbody sources and lamps in wider application areas. This book presents research-based material in this field that has been implemented, realized, tested, verified, and evaluated. It can be used as a reference source for students, practicing scientists, engineers, technicians, instrument manufacturers and measurement/calibration people to learn, design, build, select, and use new generation radiometers. The book describes a number of design issues and applications to implement the correct input geometry for detectors to measure radiometric (power, irradiance and radiance) quantities, and DC, AC, and pulsed electrical output signals.

Absolute Radiometry: Electrically Calibrated Thermal Detectors of Optical Radiation considers the application of absolute radiometry, a technique employed in optical radiation metrology for the absolute measurement of radiant power. This book is composed of eight chapters and begins with the principles of the absolute measurement of radiant power. The subsequent chapters provide the criteria associated with reflectance and transmittance of optical radiation and the parameters used to characterize the performance of radiation detectors. A chapter presents an analysis of the temperature distribution in a detector element. This topic is followed by discussions of the environmental and instrumental corrections in absolute radiometry. The final chapters deal with the alternative optical power scales and direct current substitution methods used in other fields of metrology.

Methods and Materials for Remote Sensing: Infrared Photo-Detectors, Radiometers and Arrays presents the basic principles and the guidelines for the design of IR and microwave radiometers intended for the detection of weak electromagnetic signals in a noisy background. Significant attention is paid in this book to the discussion of the origin of the noises and consideration of the physical factors limiting the sensitivity of photo sensors. The physico-chemical properties of narrow-band semiconductors, which are the basic photosensitive materials for the microwave and IR radiometry, are discussed. Also described are the methods for growing the single crystals, epitaxial films and arrays from solid solutions of these compounds for the application in photosensitive detectors. The main goal of Methods and Materials for Remote Sensing: Infrared Photo-Detectors, Radiometers and Arrays is to present the entire material from the unifying physical viewpoint, which will be helpful for the designers of photo-detecting devices, and professionals contributing in various areas of remote sensing.

The recently developed optical radiation detectors need well-designed radiometers to perform improved radiometric, photometric, colorimetric, and radiation-temperature measurements. They can produce higher performance than traditionally used blackbody sources and lamps in wider application areas. This book presents research-based material in this field that has been implemented, realized, tested, verified, and evaluated. It can be used as a reference source for students, practicing scientists, engineers, technicians, instrument manufacturers and measurement/calibration people to learn, design, build, select, and use new generation radiometers. The book describes a number of design issues and applications to implement the correct input geometry for detectors to measure radiometric (power, irradiance and radiance) quantities, and DC, AC, and pulsed electrical output signals.