The Safety Relief Valve Handbook

The Safety Valve Handbook is a professional reference for design, process, instrumentation, plant and maintenance engineers who work with fluid flow and transportation systems in the process industries, which covers the chemical, oil and gas, water, paper and pulp, food and bio products and energy sectors. It meets the need of engineers who have responsibilities for specifying, installing, inspecting or maintaining safety valves and flow control systems. It will also be an important reference for process safety and loss prevention engineers, environmental engineers, and plant and process designers who need to understand the operation of safety valves in a wider equipment or plant design context. - No other publication is dedicated to safety valves or to the extensive codes and standards that govern their installation and use. A single source means users save time in searching for specific information about safety valves - The Safety Valve Handbook contains all of the vital technical and standards information relating to safety valves used in the process industry for positive pressure applications. - Explains technical issues of safety valve operation in detail, including identification of benefits and pitfalls of current valve technologies - Enables informed and creative decision making in the selection and use of safety valves - The Handbook is unique in addressing both US and European codes:- covers all devices subject to the ASME VIII and European PED (pressure equipment directive) codes;- covers the safety valve recommendations of the API (American Petroleum Institute);- covers the safety valve recommendations of the European Normalisation Committees;- covers the latest NACE and ATEX codes;- enables readers to interpret and understand codes in practice - Extensive and detailed illustrations and graphics provide clear guidance and explanation of technical material, in order to help users of a wide range of experience and background (as those in this field tend to have) to understand these devices and their applications - Covers calculating valves for two-phase flow according to the new Omega 9 method and highlights the safety difference between this and the traditional method - Covers selection and new testing method for cryogenic applications (LNG) for which there are currently no codes available and which is a booming industry worldwide - Provides full explanation of the principles of different valve types available on the market, providing a selection guide for safety of the process and economic cost - Extensive glossary and terminology to aid readers' ability to understand documentation, literature, maintenance and operating manuals - Accompanying website provides an online valve selection and codes guide.

Valves are the components in a fluid flow or pressure system that regulate either the flow or the pressure of the fluid. They are used extensively in the process industries, especially petrochemical. Though there are only four basic types of valves, there is an enormous number of different kinds of valves within each category, each one used for a specific purpose. No other book on the market analyzes the use, construction, and selection of valves in such a comprehensive manner. - Covers new environmentally-conscious equipment and practices, the most important hot-button issue in the petrochemical industry today - Details new generations of valves for offshore projects, the oil industry's fastest-growing segment - Includes numerous new products that have never before been written about in the mainstream literature

Industries that use pumps, seals and pipes will also use valves and actuators in their systems. This key reference provides anyone who designs, uses, specifies or maintains valves and valve systems with all of the critical design, specification, performance and operational information they need for the job in hand. Brian Nesbitt is a well-known consultant with a considerable publishing record. A lifetime of experience backs up the huge amount of practical detail in this volume.* Valves and actuators are widely used across industry and this dedicated reference provides all the information plant designers, specifiers or those involved with maintenance require* Practical approach backed up with technical detail and engineering know-how makes this the ideal single volume reference* Compares and contracts valve and actuator types to ensure the right equipment is chosen for the right application and properly maintained

This indispensable book systematically guides you through Pressure Relief Valves and how they work. It shows how protective devices perform an important function in preventing the accumulation of overpressure that can result in failure and the uncontrolled release of stored energy. They are therefore categorised as safety critical items of engineering equipment. The book goes on to show that their design and testing is heavily controlled by published technical standards because many countries are covered by statutory legislation. The content of the book shows that service damage and degradation mechanisms are outlined for various applications – PRVs and bursting discs are used in a wide variety of process conditions, ranging from clean service to heavily corrosive process fluids. This results in a correspondingly large number of damage mechanisms that can prevent them from working if they are not inspected and tested correctly. Risk based inspection procedures are introduced in this book as a method of minimising the chances of failure, and therefore maintaining high levels of safety. This Quick Guide to Pressure Relief Valves is intended to provide easily accessible technical information for engineers and technicians involved in the operation, testing and maintenance of pressure systems. It also covers other types of protective devises such as bursting discs.

This two-volume book comprises a comprehensive up-to-date body of knowledge that provides a total in-depth insight into valve and actuator technology – looking not just at control valves, but a whole host of other types including: check valves, shut-off valves, solenoid valves, and pressure relief valves. Research studies within the process industry routinely indicate that the fluid control valve is responsible for 60 to 70% of poor-functioning control systems. Furthermore, valves in general are consistently wrongly selected, regularly misapplied, and often incorrectly installed. A methodology is presented to ensure the optimum selection of size, choice of body and trim materials, components, and ancillaries. Whilst studying the correct procedures for sizing, readers will also learn the correct procedures for calculating the spring ‘wind-up’ or ‘bench set’. Maintenance issues also include: testing for deadband/hysteresis, stick-slip and non-linearity; on-line diagnostics; and signature analysis. Written in a detailed but understandable language, the two volumes are presented in a form suitable for both the beginner, with no prior knowledge of the subject, and the more advanced specialist.

Within the boiler, piping and pressure vessel industry, pressure relief devices are considered one of the most important safety components. These Devices are literally the last line of defense against catastrophic failure or even lose of life. Written in plain language, this fifth book in the ASME Simplified series addresses the various codes and recommended standards of practice for the maintenance and continued operations of pressure relief valves as specified by the American Society of Mechanical Engineers and the American Petroleum Institute. Covered in this book are: preventive maintenance procedures, methods for evaluation of mechanical components and accepted methods for cleaning, adjusting and lubricating various components to assure continued operation and speed performance as well as procedures for recording and evaluating these items.

Annotation This practical guide fills a gap in the literature on pressure relief design, operation and maintenance, covering the applicability to and reliability of different pressure relief devices in individual situations.

Hardbound. Over recent years, a number of significant developments in the application of valves have taken place: the increasing use of actuator devices, the introduction of more valve designs capable of reliable operation in difficult fluid handling situations; low noise technology and most importantly, the increasing attention being paid to product safety and reliability. Digital technology is making an impact on this market with manufacturers developing intelligent (smart) control valves incorporating control functions and interfaces. New metallic materials and coatings available make it possible to improve application ranges and reliability. New and improved polymers, plastic composite materials and ceramics are all playing their part. Fibre-reinforced plastic pipe systems, glass-reinforced epoxy pipe systems and the traditional low-cost polyester pipe systems have all undergone sophisticated design and manufacturing technology changes. The pote